🛠️ What did you do to your Tremor today? [2026 edition]

I am offended! I was outbid!

Initial bid was $26, I put a max bid of $75. 2 minutes later I was outbid.

I raised my max bid to $91, and was immediately outbid.

At this point, I might as well buy from the online store at full price!

1784143761214.webp
 
Last edited:
I am offended! I was outbid!

Initial bid was $26, I put a max bid of $75. 2 minutes later I was outbid.

I raised my max bid to $91, and was immediately outbid.

At this point, I might as well buy from the online store at full price!

View attachment 262457
RC has a scratch n dent Ebay store. Bought many lights from there for 30%+ off retail. I didn't care of they were scratched or missing harnesses.
You can search their ebay store for super duty and see what they have listed.
 
Last edited:
Flew to Iowa, Granger picked me up at the airport, signed the papers and drove it home over yesterday and today.

Granger was amazing. Wouldn’t hesitate to buy from them again. Great experience, 10/10

The drive was also great. No thrills, which is what I wanted.

New wheels and 37’s go on tomorrow morning.
 
^ ^ ^ great price


New wheels and 37’s go on tomorrow morning.


Congrats! Glad to hear the trip and purchase went well. 🏁

We want photos of the new truck and the new 37s! :geek:
 
Please don't put this garbage on your expensive truck. You're halfway there towards a decent one. Just check the following threads. You'll thank me later. The company is called "Rough Country" for a reason:

Thread 'Rough Country Steering Stabilizer' https://www.fordtremor.com/threads/rough-country-steering-stabilizer.7857/

Thread 'Steering seems worse after RC dual stabilizer install' https://www.fordtremor.com/threads/steering-seems-worse-after-rc-dual-stabilizer-install.13834/

23238.webp
 
"rough" crowd! :ROFLMAO:


It's tough love 'round these here parts, pard. They only want the best for you, and I wasn't wrong when I said "great price" for a steering damper setup.

My truck remains at factory ride height but since I'm slapping on 1.5" taller tires next week, and since I run four Bilstein 5160s to tide me over a year or two before I truck a load of money to Carli's house I will be swapping my original steering damper for a single Bilstein-branded unit, most likely one made from a 5100.
 
I would love to get the more expensive options, but with my budget, its gotta be better than nothing right?
 
^ ^ ^ I completely understand your position.

If it's not too late to cancel that order, look into a single Bilstein 5100 steering damper for our latest-generation Super Duty. That'd be your absolute best budget bet.
 
I would love to get the more expensive options, but with my budget, its gotta be better than nothing right?
I have nothing and it rides great. Stock all the way though. Maybe necessary for larger tires, but I haven't gone up yet. If I will 🤷
 
I would love to get the more expensive options, but with my budget, its gotta be better than nothing right?
Are you trying to solve a problem, or is the factory one shot? I ask because I would hate to see you spend that money and still have a problem. Worse yet, the problem gets worse. Lord knows I’m not made of money. Despite what my daughter thinks. Lol. But jumping over a buck to save a dime reeeally sucks in the end.
 
No, no issue, just want something other than stock. Other than the window tint and .50 cal antenna, Big Sexy is all stock. If it turns out to make it work, I can put stock back on and sell it to someone else.
 
I am offended! I was outbid!

Initial bid was $26, I put a max bid of $75. 2 minutes later I was outbid.

I raised my max bid to $91, and was immediately outbid.

At this point, I might as well buy from the online store at full price!

View attachment 262457

At this point, the point to NOT do this has been made. Bilstein would have been a better option. Good luck.

:cool: :cool: 🇺🇲 🇺🇲 🇺🇲 🇺🇲
 
Dent in hood from dirt hauler who been running mud running empty on I84 throwing mud clods/gravel @ 70mph paintless dent repair to rescue.
Before
1784294569134.webp

After
1784294622109.webp

Be aware if PPF is on hood, it'll have to be redone, it has to be lifted in order to do the paintless dent repair. Was already scheduled in to have PPF and ceramic coating redone, after the accident in April
 
Beautification and Moab prep:
Morimoto tail lights installed thanks @Nick@ApolloOff-Road once again great customer service.
Installation is fairly straight forward, recommend downloading and printing the instructions. It's a PITA trying read them on cell or tablet.

Installation tips:
  • Morimoto taillight Radar Bracket have very tight fit due to water gasket seal. Recommned using a gasket scrapper or trim removal tool, braking the seal safely removing the Radar Bracket
  • BLIS radar module installation - modules are oreiented differently on driver and passenger side. Morimoto has a diagram of correct positioning, double check for correct module oreientation.
  • Reistors are packaged magnet to magnet, these magnets are very strong use care when separating the resistors from each other to not damage wiring.
Morimoto radar bracket removal
1784295905147.webp

Install complete - happy day BLIS also works
1784295942160.webp


Moab prep as rear departure angle can be a concern - added 41.22 hitch slider https://41twentytwo.com/product/hitch-slider/ recommend using Ford OEM hitch reducer adaptor, part# HC3Z19H282A. Ford's hitch adapter is flared, lining up reciever and adapter hitch pin holes.

1784296481338.webp
 
Back
Top Bottom