🛠️ What did you do to your Tremor today? [2026 edition]

I do not tow at all, just kind of want one on the truck. Someone hits me, they hit that first. I would love a B&W, but I am a poor Veteran living above my means as it is, lol.
Not generally a fan of Facebook, but you might see about a used one from Facebook Marketplace in your area.
 
I think with these big tires, they can go out of balance pretty easily, especially as they wear. The wheel balancers have a medium that moves as the wheel spins that the rotational forces cause the material to go where its needed to balance the wheel, so it is a continuously adjusting versus the weights that are added which are only correct when the tire is initially purchased.

The Centrimatic ones use what is effectively small ball bearings so you'll hear it rolling around inside the outer ring while the brand that's sold on CJC's website uses a liquid.

All that said, I don't know many people in SRW trucks that have added the wheel balancers. These are more common on DRW and larger trucks/busses. I figure it's one of those mods that only helps if you have them, but don't know how much it hurts to not have. As they say, "your mileage my vary" with this one.
I've been running them for a while. They are almost a necessity with the larger tires.
 
I've been running them for a while. They are almost a necessity with the larger tires.
I have the centramatic ones. I’ve been pleased, and can’t hear them at all
 
Wife is out of town, so I took the opportunity to spend the day knocking out a few projects in the garage. 😂

Got the Open Trail Creations No-Crimp Upfitter Box installed. The build quality is great, and it’s going to make future installs much cleaner and more organized.

IMG_6805.webp



Huge thanks to @Toxophilite for hooking me up with his old M&R light bar! Installation was quick and easy, and the fitment on the bumper looks factory. I’m hoping to get out tonight and take some beam shots to see how it pairs with the BMC dual fog light kit.

IMG_6812 2.webp


IMG_6814 2.webp
 
Wife is out of town, so I took the opportunity to spend the day knocking out a few projects in the garage. 😂

Got the Open Trail Creations No-Crimp Upfitter Box installed. The build quality is great, and it’s going to make future installs much cleaner and more organized.

View attachment 262171


Huge thanks to @Toxophilite for hooking me up with his old M&R light bar! Installation was quick and easy, and the fitment on the bumper looks factory. I’m hoping to get out tonight and take some beam shots to see how it pairs with the BMC dual fog light kit.

View attachment 262172

View attachment 262174
Looks great, brother! Sooooo, what else is going on since the lady is out of town, huh? We won't tell anyone! 🤪
 
Wife is out of town, so I took the opportunity to spend the day knocking out a few projects in the garage. 😂

Got the Open Trail Creations No-Crimp Upfitter Box installed. The build quality is great, and it’s going to make future installs much cleaner and more organized.

View attachment 262171


Huge thanks to @Toxophilite for hooking me up with his old M&R light bar! Installation was quick and easy, and the fitment on the bumper looks factory. I’m hoping to get out tonight and take some beam shots to see how it pairs with the BMC dual fog light kit.

View attachment 262172
I'm really liking my Pro bar!

F250 Lightbar.webp
 
This showed up in the mail. Is anyone using this particular one? I'm gathering stuff to do my upcoming oil change. I need to go buy a shop vac tomorrow. View attachment 262227
I am using that exact one, I have done 3 or 4 oil changes with it. No issues at all.
 
I just purchased this one. I have a B&W 5" drop already and need a couple more inches. If you like the tow and stow. It's built well and is very similar to B&W. The only difference so far is that there is a difference in tolerances in the pin/hitch. The B&W seems to have tighter tolerances in pin fitment. If you don't tow a lot, it may be an option.

IMG_4379.webp
 
Last edited:
I am using that exact one, I have done 3 or 4 oil changes with it. No issues at all.
Did you use the shop vac method to remove your stock drain plug? I have not unboxed the vacuum yet, and was wondering if the hose is a tight fit on the engine oil fill pipe?
 
Did you use the shop vac method to remove your stock drain plug? I have not unboxed the vacuum yet, and was wondering if the hose is a tight fit on the engine oil fill pipe?
I used a 12v Milwaukee small vac and I slipped a screwdriver beside the nozzle to keep it from fully sealing and it worked beautifully. I would guess a fullsize shop vac would like the same treatment or maybe opening the dipstick tube would alleviate the concern 🤷

Now, I do not know any of that is necessary, but I did it anyway. Just keep a pan under it regardless and maybe extra oil in case it is your only ride to the parts store 😜
 
I used a 12v Milwaukee small vac and I slipped a screwdriver beside the nozzle to keep it from fully sealing and it worked beautifully. I would guess a fullsize shop vac would like the same treatment or maybe opening the dipstick tube would alleviate the concern 🤷

Now, I do not know any of that is necessary, but I did it anyway. Just keep a pan under it regardless and maybe extra oil in case it is your only ride to the parts store 😜
Yeah, I'm the kind of worry wart that thinks about the 110v power going out on me while I'm in the middle of it. 😂
 
I just purchased this one. I have a B&W 5" drop already and need a couple more inches. If you like the tow and stow. It's built well and is very similar to B&W. The only difference so far is that there is a difference in tolerances in the pin/hitch. The B&W seems to have tighter tolerances in pin fitment. If you don't tow a lot, it may be an option.

View attachment 262253
That one is a bit closer to my budget.
 
Did you use the shop vac method to remove your stock drain plug? I have not unboxed the vacuum yet, and was wondering if the hose is a tight fit on the engine oil fill pipe?
I installed my Fumoto valve the other day with a shop vac the hose was bigger than the filler so I just slipped the hose over the filler about 4-5” and turned on the shop vac worked great.
 
Did you use the shop vac method to remove your stock drain plug? I have not unboxed the vacuum yet, and was wondering if the hose is a tight fit on the engine oil fill pipe?
I changed my valve during an oil change, so I wasn’t trying to save the oil. I haven’t tried the vacuum trick, but everyone says it works
 
Back
Top Bottom