🛠️ What did you do to your Tremor today? [2026 edition]

Nothing crazy today, just put a solid 600 highway miles on the new Geolander AT XDs going through BC. So far between a couple hundred off road and now hwy miles I'm impressed. Offroad, these things go through anything and I haven't felt like the Tremor will get stuck. On road, they're fucking noisy 😂, but the truck rides nicer now that I've gone down from an 18 to 17in wheel.


View attachment 261898
The larger sidewall really helps. These are on my list for my next tire.
 
Spent the last few days working to get the S&S DPK and the HS upper fuel filter kit installed.
While I was at it got the coolant drained and replaced with new motor craft coolant and finished up my PM after my 12000 mile road trip. Also sent an oil sample off to black stone to see what a 12k interval looks like for the rotella t6
 
The Geos are 37x12.50 17s 10ply E rated, on Nomad Sharra's 17x8.5 +10.


Excellent! Thank you.

I have posted about my plight elsewhere, so forgive me... but I want a 37" X 11.5.

Thanks to you as well as others I've noticed recently who have swapped their Super Duty Tremor's factory 18" wheel diameter to using a 17" wheel, I now know it can be done. It's a tight fit, of course, and even the tire balancing wheel weights may need to be a low-profile version (no kidding).

So... because I do not want to run the Ridge Grappler, my options are to go to a 17" for the Recon Grappler which is available in 37 X 11.5 X 17.

Since I do not want an "aggressive" offset (positive, but closer to zero offset) I found with Go0gle AI's help a +18mm offset 17 X 8.5" wide Vision Flow 351 in a satin grey (I thought about bronze, but chrome bumpers, so, no) - in stock at a wheel and tire company named SD Wheel (now in Wisconsin) offers a mounted, balanced, TPMS sensor'd wheel/tire package w/ lugs and free shipping.

I'm going to ponder on this decision for the rest of the day or at the very least through lunchtime here on the left coast... then make the purchase.

I am only reluctant in that I had really wanted to stick with my Tremor aluminum road wheels, especially since I've purchased a fifth so that I can do 5-tire tire rotations... I console myself that I will have a spare set of five mounted wheels/tires at the ready in the event I accidentally destroy two or more of this new set.

It's only money, right? Agh... if only there were a decent, 37 X 11.5 X 18 tire! but there is not at this time.
 
Flights are booked!
Picking it up Tuesday then making the trip back down to the MS coast over the next 2 days

Wheels and tires go on Thursday morning, first oil change that weekend.
Whoo Hoo, another Gulf Coast Tremor!
We need to plan a gathering.
 
Excellent! Thank you.

I have posted about my plight elsewhere, so forgive me... but I want a 37" X 11.5.

Thanks to you as well as others I've noticed recently who have swapped their Super Duty Tremor's factory 18" wheel diameter to using a 17" wheel, I now know it can be done. It's a tight fit, of course, and even the tire balancing wheel weights may need to be a low-profile version (no kidding).

So... because I do not want to run the Ridge Grappler, my options are to go to a 17" for the Recon Grappler which is available in 37 X 11.5 X 17.

Since I do not want an "aggressive" offset (positive, but closer to zero offset) I found with Go0gle AI's help a +18mm offset 17 X 8.5" wide Vision Flow 351 in a satin grey (I thought about bronze, but chrome bumpers, so, no) - in stock at a wheel and tire company named SD Wheel (now in Wisconsin) offers a mounted, balanced, TPMS sensor'd wheel/tire package w/ lugs and free shipping.

I'm going to ponder on this decision for the rest of the day or at the very least through lunchtime here on the left coast... then make the purchase.

I am only reluctant in that I had really wanted to stick with my Tremor aluminum road wheels, especially since I've purchased a fifth so that I can do 5-tire tire rotations... I console myself that I will have a spare set of five mounted wheels/tires at the ready in the event I accidentally destroy two or more of this new set.

It's only money, right? Agh... if only there were a decent, 37 X 11.5 X 18 tire! but there is not at this time.

There a few more choices in 38x11.5 (Toyo RT Pro) if that’s an option for you.
 
Finally made it home from my epic road trip. Around 12,500 miles total from Texas to Alaska, a road trip around Alaska to Glacier NP, Kenai Fjords NP, and Wrangel-St. Elias NP, Top fo the World Highway to Dawson City, up the Dempster Hwy to Tuk, and then back down the Alcan to Liard Hot Springs, Icefields Parkway, Yoho NP and Banff in Canada, Glacier NP, Theodore Roosevelt NP, 4th of July at Mount Rushmore, and then finishing off with Wind Cave NP.

Picked up my custom designed slide-in Cache Camper in Palmer, Alaska and traveled the rest of the trip with it. Carli PinTop level with Full Travel Airbags (at 100psi) and a Hellwig (7845) 1-1/8" rear sway bar handled everything flawlessly. The sway bar was a last minute upgrade that I did just to be safe.

Currently considering an AEV Front Bumper and Bowen Custom Camper Bed as next upgrades.

IMG_5676 (1).webp


IMG_2484.webp


IMG_3527.webp


IMG_3389.webp
 
Whoo Hoo, another Gulf Coast Tremor!
We need to plan a gathering.
If you plan a meet-up in Shreveport, you might get a bunch of folks from Texas making the trek to join the party. Find a place that does a good boil and we might make the trip from Dallas.
 
If you plan a meet-up in Shreveport, you might get a bunch of folks from Texas making the trek to join the party. Find a place that does a good boil and we might make the trip from Dallas.
My place is where the best boil is!
 
How’s the sway bar on stock suspension, think I want to do it. Any real difference.

Reporting back after a couple days.

With the Carli sway bar, Carli leaf spring shackles and tire pressure set to 55F/55R, I would now say it is the best riding 1 ton I have ever been in (there is a fat girl joke for Optimus in there somewhere). I have never been in a full Carli specced truck, however, so can't comment on how it compares to that.

The front is noticeably less jarring with the new bar. It is most evident when turning into something like my ramped driveway. The bounce to the opposite side is noticeably less when the first tire starts to climb the ramp before the second tire hits the ramp. Is the difference worth the $1.6K? My wife would say hell no, but I wanted to try it out and have no regrets. It will stay on the truck.

Only downside from mods so far is the Carli rear shackles allowing a bit more squat when I hook up my gooseneck. They perform fine. Just returned from towing 12K to and from Utah last week with zero issues. Rear of the truck just sits approximately an inch lower than before.
 
There a few more choices in 38x11.5 (Toyo RT Pro) if that’s an option for you.


Yes, that WAS the plan. Was, as in I would do some Carli bits up front first. I know that over on FTE user Crumm out of Alaska has slapped on a set on his factory-height Tremor but no reports back on the matter of full articulation w/ that tire.

Too, the narrow 38, while a brilliant product and one I will use in the future, would put my effective final drive gearing just outside my perceived "sweet spot" - I want to see how my truck performs on the 37 X 11.5 first. That should be a sure thing and I'll even remove the front swaybar if there is tire/bar interference. Many have done just that. If I do that then later think better of it I'll do a Carli bar (not cheap).

Thanks for the reminder. Tires have remained a constant rabbit hole. A daily! ponderance, for sure. I only lament the lack of 37 X 11.5 X EIGHTEEN, hence the move to a 17" wheel. Bah.




Currently considering an AEV Front Bumper and Bowen Custom Camper Bed as next upgrades


A Bowen Custom/s bed is the ne plus ultra for me and my truck. It will happen, perhaps next year in '27. Major goal.

You do that and post pictures? I'll fall over peeing on myself from both happiness and envy. Hahaha! Can't wait to see it! Cheers!
 
Yes, that WAS the plan. Was, as in I would do some Carli bits up front first. I know that over on FTE user Crumm out of Alaska has slapped on a set on his factory-height Tremor but no reports back on the matter of full articulation w/ that tire.

Too, the narrow 38, while a brilliant product and one I will use in the future, would put my effective final drive gearing just outside my perceived "sweet spot" - I want to see how my truck performs on the 37 X 11.5 first. That should be a sure thing and I'll even remove the front swaybar if there is tire/bar interference. Many have done just that. If I do that then later think better of it I'll do a Carli bar (not cheap).

Thanks for the reminder. Tires have remained a constant rabbit hole. A daily! ponderance, for sure. I only lament the lack of 37 X 11.5 X EIGHTEEN, hence the move to a 17" wheel. Bah.







A Bowen Custom/s bed is the ne plus ultra for me and my truck. It will happen, perhaps next year in '27. Major goal.

You do that and post pictures? I'll fall over peeing on myself from both happiness and envy. Hahaha! Can't wait to see it! Cheers!
I had contemplated going to a 17" wheel when I purchased my KMCs as that opened up some good options with the Mickey Thompson tires that a lot of people seem to love. Ultimately decided against it as I have Centrimatic wheel balancers on each hub that won't fit in a smaller wheel and I like having my wheels always balanced. Figured that was a good tradeoff given how easy it seems to be for these large tires to go out of balance as they wear (not to mention some of the challenges I've seen people have just getting a new set balanced).

If you want wheel balancers and the 17" wheel, I think the brand that CJC sells is smaller in diameter so might fit. They have less overall mass, so they are slightly less effective than the Centrimatic ones. Not sure how much of a difference the mass difference makes for most situations, but its one to be aware of.
 
Where is this place and when is the boil happening? asking for many, many friends.
My back yard and next crawfish season (spring). It starts in January but you want to give them time to grow big and juicy.
1783692775043.webp
 
If you want wheel balancers and the 17" wheel, I think the brand that CJC sells is smaller in diameter so might fit.


Thank you!

The tire/wheel seller and I spoke at length about this fitment. I was assured they will use "low profile" tape-on weights, thinner than the standard peel-and-stick 1/4 gram stuff.

I am unfamiliar with what you describe is on your truck. I find it interesting.

The Recon Grappler does have a great repuation for balancing out using very little weight, so the outlier here in the Vision brand wheel, but it's not an unfamiliar minor-league wheel, used to good effect in the 1/2-ton world. Mine are machined prescisely for use on the Super Duty, hubcentric and with obviously the correct bolt circle.

Good dampers and regular tire rotations go a long way to produce smooth tire wear. That, and a conservative approach (me starting w/ 37s rather than any 38"+).

Thanks again! for your reply. ALWAYS! appreciated! 🏁
 
My place is where the best boil is!
Let me know love a good boil, we have a good place here that does it on Kentucky Derby day, always a good party for a 2 minute race. Love a road trip to meet new tremorites.
 
Let me know love a good boil, we have a good place here that does it on Kentucky Derby day, always a good party for a 2 minute race. Love a road trip to meet new tremorites.
Roger That Brother
 
Love to plan a trip around food, never know where you will end up. Once took a week long motorcycle trip in search of the best biscuits and gravy, found them in a little roadside diner in Idaho.
 
Love to plan a trip around food, never know where you will end up. Once took a week long motorcycle trip in search of the best biscuits and gravy, found them in a little roadside diner in Idaho.
Avery Island is just a few minutes from me. A drive around the Jungle Gardens, tour of the Tabasco Factory and lunch at the restaurant there.
 
Thank you!

The tire/wheel seller and I spoke at length about this fitment. I was assured they will use "low profile" tape-on weights, thinner than the standard peel-and-stick 1/4 gram stuff.

I am unfamiliar with what you describe is on your truck. I find it interesting.

The Recon Grappler does have a great repuation for balancing out using very little weight, so the outlier here in the Vision brand wheel, but it's not an unfamiliar minor-league wheel, used to good effect in the 1/2-ton world. Mine are machined prescisely for use on the Super Duty, hubcentric and with obviously the correct bolt circle.

Good dampers and regular tire rotations go a long way to produce smooth tire wear. That, and a conservative approach (me starting w/ 37s rather than any 38"+).

Thanks again! for your reply. ALWAYS! appreciated! 🏁
I think with these big tires, they can go out of balance pretty easily, especially as they wear. The wheel balancers have a medium that moves as the wheel spins that the rotational forces cause the material to go where its needed to balance the wheel, so it is a continuously adjusting versus the weights that are added which are only correct when the tire is initially purchased.

The Centrimatic ones use what is effectively small ball bearings so you'll hear it rolling around inside the outer ring while the brand that's sold on CJC's website uses a liquid.

All that said, I don't know many people in SRW trucks that have added the wheel balancers. These are more common on DRW and larger trucks/busses. I figure it's one of those mods that only helps if you have them, but don't know how much it hurts to not have. As they say, "your mileage my vary" with this one.
 
Back
Top Bottom