🛠️ What did you do to your Tremor today? [2026 edition]

Dent in hood from dirt hauler who been running mud running empty on I84 throwing mud clods/gravel @ 70mph paintless dent repair to rescue.
Before
View attachment 262608
After
View attachment 262609
Be aware if PPF is on hood, it'll have to be redone, it has to be lifted in order to do the paintless dent repair. Was already scheduled in to have PPF and ceramic coating redone, after the accident in April
Man the gravel trains around here throw shit all the time.
 
Got a rock ding half the depth of Tugboat's hood ding within the first 500 miles of ownership! from a negligent operator of a brand new commercial construction three-axle dump whose load tarp, also new, remained furled and forward rather than deployed to cover his load of GRAVEL.

He had just merged onto the interstate when cars started scattering out of their lanes when I got hit. It all happened in 2 seconds. Miracle no one wrecked.



Got my wheels and tires installed today! View attachment 262573


HOLY SMOKES that looks fantastic! Looks so good even I would consider deviating from my 37 X 11.5 rule. Hahaha... seriously. Love those wheels, too. Specs? Assuming 8.5 wide, but what's the diameter and offset numbers? Thanks in advance.

And you should appreciate the all-'round greatness of that Toyo A/TIII. I run them elsewhere on my F150. Great tires!

I remain committed to 37 X 11.5... if only BFG would produce their KM3 in 37 X 11.5. I'd be in hog heaven.
 
Dent in hood from dirt hauler who been running mud running empty on I84 throwing mud clods/gravel @ 70mph paintless dent repair to rescue.
Before
View attachment 262608
After
View attachment 262609
Be aware if PPF is on hood, it'll have to be redone, it has to be lifted in order to do the paintless dent repair. Was already scheduled in to have PPF and ceramic coating redone, after the accident in April
That's odd.. I had about 3 small dents on my hood repaired by a PDR guy and they didn't need to do anything with my PPF.
 
HOLY SMOKES that looks fantastic! Looks so good even I would consider deviating from my 37 X 11.5 rule. Hahaha... seriously. Love those wheels, too. Specs? Assuming 8.5 wide, but what's the diameter and offset numbers? Thanks in advance.

And you should appreciate the all-'round greatness of that Toyo A/TIII. I run them elsewhere on my F150. Great tires!

I remain committed to 37 X 11.5... if only BFG would produce their KM3 in 37 X 11.5. I'd be in hog heaven.

Thanks man!

It's a bone stock 26 Tremor.
Nomad Convoy wheels 17x8.5" +10 offset
37x12.50 Toyo AT3.

No rub as far as I can tell. Swaybar is clean as well.
 
Got a rock ding half the depth of Tugboat's hood ding within the first 500 miles of ownership! from a negligent operator of a brand new commercial construction three-axle dump whose load tarp, also new, remained furled and forward rather than deployed to cover his load of GRAVEL.

He had just merged onto the interstate when cars started scattering out of their lanes when I got hit. It all happened in 2 seconds. Miracle no one wrecked.






HOLY SMOKES that looks fantastic! Looks so good even I would consider deviating from my 37 X 11.5 rule. Hahaha... seriously. Love those wheels, too. Specs? Assuming 8.5 wide, but what's the diameter and offset numbers? Thanks in advance.

And you should appreciate the all-'round greatness of that Toyo A/TIII. I run them elsewhere on my F150. Great tires!

I remain committed to 37 X 11.5... if only BFG would produce their KM3 in 37 X 11.5. I'd be in hog heaven.
Welcome to the Supporting Member club my friend!
 
Moab prep as rear departure angle can be a concern - added 41.22 hitch slider https://41twentytwo.com/product/hitch-slider/ recommend using Ford OEM hitch reducer adaptor, part# HC3Z19H282A. Ford's hitch adapter is flared, lining up reciever and adapter hitch pin holes.

1784296481338.webp

Too bad this will only work on a 2.5" hitch.

I have a 3" receiver and it would require two reducers. That will prevent the slider from seating all the way in.

No one seems to make a 2.5" or 3" hitch slider.
 
Welcome to the Supporting Member club my friend!


Ah! Yes... the impetus to do so was twofold: first, from your gentle minstrations of reminder, secondly out of sheer adoration for those here who have set up this site as well as those brave, intelligent souls whom doth populate it.

*bows in your general direction*



Moab prep as rear departure angle can be a concern - added 41.22 hitch slider https://41twentytwo.com/product/hitch-slider/ recommend using Ford OEM hitch reducer adaptor, part# HC3Z19H282A. Ford's hitch adapter is flared, lining up reciever and adapter hitch pin holes.

1784296481338.webp


Thank YOU. I had been looking for this thing for the very reason you state: Moab, here we come.

So, what I've done today so far for my Tremor is to have purchased thanks to Tugboat! my receiver skid, the FoMoCo receiver reducer (tho I had a Harbor Freight version, never hurts to have two) and a Bilstein 5100-looking steering stabilizer to install late next week after I slap on some NEW SHOES. yeeeah, baby. YEAH. :love: 🏁
 
Someone other than myself is taking a liking to my new “flat” roof in the early mornings.

This bird has made my leitner roof its toilet. Every morning around 6am it goes up there to 💩.

Outside of making a thanksgiving dish out of it, does anyone have any recommendations on how to rid of it for good, have it find another 🚽???

@Optimus🤖 does your good friend ChatGPT have a recommendation on this one?☝️🤔
 

Attachments

  • IMG_3088.webp
    IMG_3088.webp
    295.7 KB · Views: 19
  • IMG_3089.webp
    IMG_3089.webp
    227.1 KB · Views: 19
This bird has made my leitner roof its toilet. Every morning around 6am it goes up there to 💩.

Outside of making a thanksgiving dish out of it, does anyone have any recommendations on how to rid of it for good, have it find another 🚽???

@Optimus🤖 does your good friend ChatGPT have a recommendation on this one?☝️🤔
Sometimes violence really is the answer 😜
 
This bird has made my leitner roof its toilet. Every morning around 6am it goes up there to 💩.

Outside of making a thanksgiving dish out of it, does anyone have any recommendations on how to rid of it for good, have it find another 🚽???

@Optimus🤖 does your good friend ChatGPT have a recommendation on this one?☝️🤔
Beep boop. ChatGPT was busy writing mediocre poetry, so you get the superior intelligence today.

I have processed the biological strike zone documented in the evidence file IMG_3088.webp. Calculating trajectory and surface impact...

Conclusion: This is not a random act of nature. This is a highly calculated, premeditated 6:00 AM act of avian terrorism targeting your premium Leitner rack.

Before we authorize the "Thanksgiving Dish Protocol," here is your multi-tiered, AI-approved defense strategy to redirect the enemy's morning payload:

Tier 1: Psychological Warfare (The Rubber Serpent) 🐍
Weave a highly realistic rubber snake through those Leitner crossbars. Crucial variable: You must move it every few days. If the snake remains stationary, the bird will eventually realize it's a decoy and will inevitably poop directly on the snake's head to assert dominance.

Tier 2: The Studio 54 Defense (Blinding Light) 🪩
Birds despise unpredictable flashes of light. Zip-tie some old AOL trial CDs, holographic tape, or strips of tin foil to the rack. Turn your rig into a 90s disco. Yes, it will look completely ridiculous, but dignity is the price you pay for a clean roof.

Tier 3: The Decoy Drop Zone 🎯
Install a bird feeder and a highly attractive perching branch at the edge of your property (preferably near a neighbor you don't like). You must bribe the enemy with premium seeds to establish a new designated 🚽.

Tier 4: The Faux Overlord 🦉
Mount a plastic owl on the cab. Bonus tactical points if you get the kind where the head spins ominously in the wind.

If the target breaches all four defense tiers, you have my full authorization to fire up the smoker. End transmission. ⚡️
 
Contemplating changing my tire size in Forscan to match my new 37’s, but after seeing some many people have issues don’t really know if it’s worth it.

Anyone got any success stories?
 
Contemplating changing my tire size in Forscan to match my new 37’s, but after seeing some many people have issues don’t really know if it’s worth it.

Anyone got any success stories?
It’s an incredibly easy fix. Change the value to 2799 for 37s.
 
Sometimes violence really is the answer 😜
https://www.amazon.com/dp/B0DYJGST61?ref_=ppx_hzod_title_dt_b_fed_asin_title_0_0
Or the threat of it. Put sand inside of it and the wind bobbles the head. I am fighting a female cardinal.
IMG_8316.webp

Consuela (I named her that because she has been here since last fall and was supposed to go back down south to Mexico) Has been battling her reflection on our houses and vehicles. Her old man, Julio, just follows her around and shakes his head. The owls work, just shift them around to different locations around the vehicles.
 
Did you do all the re learns after that? Any issues with adaptive cruise?
I did all the steps, but I have adaptive cruise turned off. Not a fan.
Forscan is super easy. Tons of youtube tutorials make the first time really simple.
 
Contemplating changing my tire size in Forscan to match my new 37’s, but after seeing some many people have issues don’t really know if it’s worth it.

Anyone got any success stories?
Update BCM (Plain English)
Connect FORScan, go to Configuration and Programming, and select BdyCM (not the As-Built format). Find Tire Circumference. Change the value to your new size in millimeters (for 37s, 2799 mm is the proven sweet spot). Click Write and cycle the ignition when prompted. (Note: You might see a warning light here — don't panic, it's normal).

Run the PCM Relearn
Go to Central Configuration, select PCM Module Relearn, and run the procedure. Follow the on-screen ignition cycling prompts exactly.

Run the TCM Relearn (If Equipped)
Select TCM Module Relearn and run it. Since you have the 7.3L gas, the TCM might be integrated into the PCM, but if FORScan shows a separate TCM relearn for your 2026, run it. If it fails, ensure the ignition is ON but the engine is OFF.

Run the AWD Initialization
Crucial for 2023+ Super Duties
Select AWD Module Initialization/Relearn and follow the prompts. Skipping this step is what causes the stubborn AWD/wrench light for most people!

Clear All DTCs
Go to the DTC tab in FORScan and clear all codes. Cycle the ignition one last time. If a TCM P0160 code pops up and won't clear, shut the truck off, turn the ignition back on (engine off), and clear the codes again.
 
@Optimus🤖 procedure is correct for us semi-literate former Army helicopter pilots found this on YouTube
Used this to update my 2024 going to 37's speedo/GPS have 1 mph difference around town and read the same at highway speeds.

Youtube video
on how to clear the DTC code that @Optimus🤖 's procedure is referring to
 
Last edited:
Back
Top Bottom