🛠️ What did you do to your Tremor today? [2026 edition]

On that note…listing tire pressures without the tire size doesn’t really say anything 😂

A 40x13.50R17 at 25 psi and a 35x12.50R17 at 25 psi are two very different setups. The larger tire has substantially more air volume and generally needs less pressure to carry the same load with comparable sidewall deflection.

I run 34F/30R in my 38x13.50R17s when unloaded :cool:
 
5D20CC11-056E-4E40-9292-05B55DB5EADE.webp


First oil change tomorrow, then probably back here.
 
On that note…listing tire pressures without the tire size doesn’t really say anything 😂

A 40x13.50R17 at 25 psi and a 35x12.50R17 at 25 psi are two very different setups. The larger tire has substantially more air volume and generally needs less pressure to carry the same load with comparable sidewall deflection.

I run 34F/30R in my 38x13.50R17s when unloaded :cool:
Stock wheel/tire 😉
 
  • Like
Reactions: McE
Wasn't directed at you BTW. I just see guys list tire pressures all the time with no context 🤷‍♂️😂

Don't mind me...
Eh, we know you're not being a a dick. You've been on here long enough to know you're not like that.

So yes, we do mind (and may bust your balls for a little friendly fun).
 
AFTERNOON UPDATE

Have not kept up with pics like I should. Today finally put my license plate from Florida on! 6/15 purchase lol. Yesterday, added the high profile Husky Hood Protector.
Some I’ve mentioned already but to have the complete list in one place:

TREMOR SILL PROTECTION
Omaha Bravo Designs hardware swaps to protect parts from theft.
https://omahabravodesigns.com
Open Trail Creations upper glovebox organizer and AirGuard Pro.
https://www.opentrailcreations.com/p...d-pro-filtered
Rekgen Trophy Mudflaps
https://rekgen.com/collections/ford-...39532435931194
UWS low pro Deep
https://www.uwsta.com/part/TBSD-69-LP- BLK
Dirt Church Industries Slack Jaw Tie downs from his “new product claims patent on us” (still second hand mad) Sale
https://dirtchurchindustries.com/col...ducts/slackjaw
Stubby Antenna
Amazon Amazon

And of course, I’ve done my break in oil change. Removed the tremor logo from the sides.
I have purchased the correct OBD2 to make the Forscan changes I want but haven’t yet.

NEED TO:
WAX OR CERAMIC
INSTALL MOBILE GMRS AND HAM (or hack one for both.)
Get cool plate for front lol
 

Attachments

  • IMG_4031.webp
    IMG_4031.webp
    360.8 KB · Views: 11
  • IMG_4001.webp
    IMG_4001.webp
    452.9 KB · Views: 10
Last edited:
^ ^ ^ NOICE! and nice to see/read about some of the touches you're adding. 🏁



I got my tires mounted, Carli lift is being installed later this week.
38/11.5r18 Toyo RT pro. +19 on foundation rims.


Outstanding! Ranger... and I'm a wee bit envious. Glad to see someone use this tire! and I like that wheel, too.

You may have observed elsewhere my adoration of that tire and it's proportion, but I won't run it on my stock Tremor lift truck. Instead I've chosen a Recon Grappler in 37 X 11.5 X 17 and putting them on less expensive wheels (than a Method, for example). My wheels/tires will be here Wednesday! so I'll post up some pics.

Can't wait to see your truck after the fact. This is epic! Cheers!
 
^ ^ ^ NOICE! and nice to see/read about some of the touches you're adding. 🏁







Outstanding! Ranger... and I'm a wee bit envious. Glad to see someone use this tire! and I like that wheel, too.

You may have observed elsewhere my adoration of that tire and it's proportion, but I won't run it on my stock Tremor lift truck. Instead I've chosen a Recon Grappler in 37 X 11.5 X 17 and putting them on less expensive wheels (than a Method, for example). My wheels/tires will be here Wednesday! so I'll post up some pics.

Can't wait to see your truck after the fact. This is epic! Cheers!
I thought about the same recon grapplers they will look good on a 17” rim. I need a more aggressive tire to get my land when it rains.
 
First oil change today at 1200 miles. Used the shop vac trick to install the Fumoto valve, worked great. Installed the oil fill extension as well.

Also installed the Built Right rear seat release. Little OEM+ mod that I’ll probably never use.
 
Picked these up the other day after seeing them on a FB Diamond Back Mod page. Nicely made fit great and don’t look like boat cleats on the side of the cover. Repainted the button heads while it was apart.
IMG_1771.webp
IMG_1773.webp
IMG_1788.webp
IMG_1789.webp
IMG_1790.webp
 
Back
Top Bottom