What’s in your gun safe?

1000032673.webp
 
That sig is direct thread, not meant for a muzzle device. Rocksett / ceramic threadlocker isnt terrible to get off unless the device was over torqued during installation.
 
majorbison said:
That sig is direct thread, not meant for a muzzle device. Rocksett / ceramic threadlocker isnt terrible to get off unless the device was over torqued during installation.
Click to expand...
Yessir. I just needed go buy a shouldered mount for the can. Should be here this week. 🤠
 
majorbison said:
That sig is direct thread, not meant for a muzzle device. Rocksett / ceramic threadlocker isnt terrible to get off unless the device was over torqued during installation.
Click to expand...
Almost anything can be fitted with a QD muzzle device if your willing. I have done both my 5.5" rattlers with QD devices for Huxwrx Flow cans.
 
Mhpdr63 said:
Almost anything can be fitted with a QD muzzle device if your willing. I have done both my 5.5" rattlers with QD devices for Huxwrx Flow cans.
Click to expand...
I found love in the Plan-B ecosystem. Specifically Rearden for most of it.
 
OldFart said:
Kimber 5 inch Raptor and a Zero Tolerance 0551 ELMAX

View attachment 249891
Click to expand...
Looks nice! My first Kimber was from their year of external extractors... Was a terrible time to buy one, after several trips back and forth they finally replaced it with another model that had an internal extractor. It's been solid but I still have PTSD of the first one so I rarely shoot it...
 
HMM said:
Looks nice! My first Kimber was from their year of external extractors... Was a terrible time to buy one, after several trips back and forth they finally replaced it with another model that had an internal extractor. It's been solid but I still have PTSD of the first one so I rarely shoot it...
Click to expand...
Their new 1911 ds warrior is supposed to be a steal of a deal around 1k. Their 2k11 pro comp is damn sexy… I have yet to dip my toe into 2k11s but this one has me real tempted
 
BFill85_KRTremor said:
Their new 1911 ds warrior is supposed to be a steal of a deal around 1k. Their 2k11 pro comp is damn sexy… I have yet to dip my toe into 2k11s but this one has me real tempted
Click to expand...
You have suspension, wheels and tires to do, sir! Don't even think about it! 🤪
 
Optimus🤖 said:
You have suspension, wheels and tires to do, sir! Don't even think about it! 🤪
Click to expand...
Haha 1000%

I finished mother in laws kitchen remodel tonight.

So now it’s time to lock in a focus. Will prob be lift and wheel and be asshole who rolling around on OEM 35s for couple months but oh well


The 2k11 can be end of year wishes… I love handguns but everytime I look to to buy an expensive one I can’t. I end up viewing them too utilitarian. Also the 2k11 I couldn’t purchase currently in my lovely state. It’s high capacity. 🙄
 
McE said:
Pro tip: boil it. That's how we remove stubborn MDs and suppressor adapters at the shop. Rocksett and Hot Lock generally won't soften or release under heat alone, but we have a 100% success rate with boiling water.

Here's a picture of the taper cap that should have come with it:

View attachment 249761
Click to expand...

I've been sitting on my 9" SBR because I have read what a PITA it is. Need to get that thing off of it so I can put a Surefire mount on it.

Do you guys pull the barrel to mount in a vise to remove or just boil it and then send it with a wrench?

I have heard a 18mm or 19mm on a Milwaukee M18 impact will do it as well, but the thought of taking an impact to a rifle makes me go hmmm.
 
Avslash said:
I've been sitting on my 9" SBR because I have read what a PITA it is. Need to get that thing off of it so I can put a Surefire mount on it.

Do you guys pull the barrel to mount in a vise to remove or just boil it and then send it with a wrench?

I have heard a 18mm or 19mm on a Milwaukee M18 impact will do it as well, but the thought of taking an impact to a rifle makes me go hmmm.
Click to expand...
Yeah, I wouldn’t use an impact 😂

Correct way on the Sigs is to use a barrel support tool like this one:

www.sigsauer.com

MCX BARREL SUPPORT TOOL 5.56NATO / 300BLK - MODDEV

Safely remove muzzle devices for 5.56 and 300BLK chambered MCX models with the MODDEV barrel support tool.
www.sigsauer.com www.sigsauer.com

I’ve seen guys boil them and then put a wrench on the MD while holding the rifle between their legs. A little cowboy even for me but if it works it works I guess.
 
McE said:
Yeah, I wouldn’t use an impact 😂

Correct way on the Sigs is to use a barrel support tool like this one:

www.sigsauer.com

MCX BARREL SUPPORT TOOL 5.56NATO / 300BLK - MODDEV

Safely remove muzzle devices for 5.56 and 300BLK chambered MCX models with the MODDEV barrel support tool.
www.sigsauer.com www.sigsauer.com

I’ve seen guys boil them and then put a wrench on the MD while holding the rifle between their legs. A little cowboy even for me but if it works it works I guess.
Click to expand...

Thanks, hadn’t seen that too previously. Yeah, the impact wrench method raised my eyebrows when I heard that.

mrmag00 said:
All I use to hold a barrel to remove or install.

Click to expand...

Yep, I have the .308 version in the tool box.
 
BFill85_KRTremor said:
Haha 1000%

I finished mother in laws kitchen remodel tonight.

So now it’s time to lock in a focus. Will prob be lift and wheel and be asshole who rolling around on OEM 35s for couple months but oh well


The 2k11 can be end of year wishes… I love handguns but everytime I look to to buy an expensive one I can’t. I end up viewing them too utilitarian. Also the 2k11 I couldn’t purchase currently in my lovely state. It’s high capacity. 🙄
Click to expand...
I will buy 1 in Honor of your Loss living in Commie land
 
You must log in or register to reply here.

Tremor Forum Fav 👍

Trailersphere RV Caddy, RV Accessories Organizer Trailersphere RV Caddy, RV Accessories Organizer - Grab one through Amazon!

Tremor Forum Photos

Latest Discussions

Back
Top Bottom