🛠️ What did you do to your Tremor today? [2026 edition]

Finally got around to installing S&B transfer pump and a Homelink rear view mirror that actually has some range.

Working on a skid plate to mount at the DEF tank mounting points to protect pump better.

Got the mirror from Bob's Automotive Mirrors.

https://www.bobsmirrors.com/NEW-AdventGentex-Frameless-Auto-Dim-Rear-View-Mirror-wHomelink®-V5-Homelink®-Connect-Plug-Play-for-2017-2026-Ford-F250-F350-F450-F550-F600-Super-Duty_p_1785.html

View attachment 252693View attachment 252694View attachment 252695View attachment 252696
Homelink range in the visor has been AWFUL for me. I do have the auto high beams on my truck though, dont most of our trucks? Did this still work out okay?

1775668470852.webp


The text in the red worried me, although i dont think any of that is on the bracket for the mirror so it should be fine?. Also - what length wire did you do? Could you take a pictrue of the backside of the mirror?
 
Last edited:
I was thinking they can’t be that bad, and then I looked. 😂

God damn does it look good though. Very nice.
Hahahahahaha. I appreciate that. The amount of compliments I have received in 2 days is astonishing. It does come at a cost though.
 
Homelink range in the visor has been AWFUL for me. I do have the auto high beams on my truck though, dont most of our trucks? Did this still work out okay?



The text in the red worried me, although i dont think any of that is on the bracket for the mirror so it should be fine?. Also - what length wire did you do? Could you take a pictrue of the backside of the mirror?
I didn't use a wire cover, just have the cord wrapped around the mirror and the plug hidden behind the mirror. Going to try and see if I can hide it better in the headliner when I have everything down when I do sound treatment on the roof in the next couple weeks.

I don't see the plug when I'm sitting in the drivers seat so I might not even mess with it as it's hidden pretty well.

I don't know about auto high beams, I turned them off a while ago, tho I don't think any of that is on the mirror bracket itself.
IMG_2597.webp
 
Installed my Oxford White and Darkened Bronze Metallic Tailgate Appliqué from BFN. I know they are pricey, but the quality is unmatched.
Looks great my friend! You get what you pay for 😁.
 
Finally got around to installing S&B transfer pump and a Homelink rear view mirror that actually has some range.

Working on a skid plate to mount at the DEF tank mounting points to protect pump better.


View attachment 252694

Somebody explain what I am looking at here. What is the silver thing where the def cap was?

Quick disconnect for fuel nozzle since pump was modded to fit under truck rather than in the bed?
 
Somebody explain what I am looking at here. What is the silver thing where the def cap was?

Quick disconnect for fuel nozzle since pump was modded to fit under truck rather than in the bed?
Yeah it's a QD, the female end of the QD is on the hose with the nozzle.
 
@esw004

Thanks. The more I look at your install, the more I think I might try and replicate that. Would MUCH rather have the pump under the truck and not taking up bed space.

Could you let me know what model of breakway fitting that is?

Also curious how you secured the breakaway through the former def fill port hose hole.

Thanks, and nice work.
 
One step closer to my final “build” for now, got my Line-X bed liner done finally and had them install a Ranch Hand grill guard while they had it just in time fo a trip back to the ranch in TX this past week… very happy with the results (and the little bit of extra weight smooths out some of the residual stiffness of stepping up to the 5600lbs Tremor coils).

Next up on the docket (I guess I should start a build thread now?):
- window tint
- shocks
- tires
- Tremor side steps
- also considering selling the single BD fog pocket kit and upgrading the BMC Apex XL 80 setup

IMG_6528.webp
 
@esw004

Thanks. The more I look at your install, the more I think I might try and replicate that. Would MUCH rather have the pump under the truck and not taking up bed space.

Could you let me know what model of breakway fitting that is?

Also curious how you secured the breakaway through the former def fill port hose hole.

Thanks, and nice work.
Got the inspiration from this, just didn't like the QD down that low:


QD Couplers


Shoddily fabricobbled a piece of diamond tread, some 1.5" delrin spacers, and m5 bolts from local hardware store.

Needed to drill out a couple large washers to get the thickness right to take up space between coupler, hose and diamond tread.

IMG_2598.webp
 
I finally had a chance to take the truck out of the city and adjust all of the lights to their final positions. I got lucky and had a great sunset while I was waiting for it to get dark. There is no editing on either of the pics, it’s amazing how the red sunset makes the Carbonized Grey truck look bronze from one side. All lights are being controlled by the Switch Pros RCR 12.

Currently running all amber lenses, but I do have clear lenses if I decide to swap or mix them up.

XL 80’s and S1’s on the A pillars
Squadron Pro and Squadron SAE Fog Lights
XL Pro Linkable Light Bar
S2 pros in side step boxes
4 S2 Pros (on @legmar mount) and 2 Squadron Pros below the rear bumper

I wish I could mount/point the S2’s in the step pockets a little more level, if anyone has 3d printed a “wedge mount” for this please let me know.

View attachment 252447
View attachment 252448
View attachment 252449
What are these buttons next to upfitter switches?
 
What are these buttons next to upfitter switches?
The Switch Pros panel power system used for controlling auxiliary vehicle lighting and accessories.
 
The Switch Pros panel power system used for controlling auxiliary vehicle lighting and accessories.
I don't need it. But now I have to have it.
 
1775760088411.webp


At 50k i was feel some pulsating in my braking, likely warped front rotors. With towing some decent loads and 37s i wanted to give the PowerStops a shot. They do seem to have less fade (as expected with the vented/slotted rotors). Overall stopping power i think has seen a small improvement but not earth shattering. For the price though i think its a great upgrade and very easy to install on your own! From what i understand in talking to the vendor the pads may wear a little faster than OEM but i think the tradeoff is worth it for the better cooling. Overall very happy with them!
 
Swarfworks one is nice; I like how it’s angled to the driver; and they have the MY23+ one now too. I’m still undecided on the angled SW 8 button, or maybe do the SDHQ 8/12.

I like how much more the SDHQ one blends in, especially in my case with the KR, so the plastic colours clash. Gotta find a good match with a rattle can.
 
Found my one thing lol
I want one so damn bad but am worried it'd get me in big trouble. I also want a PA system but that would definitely have me in some sort of peril... 🤷😜🤣
 
Back
Top Bottom