🛠️ What did you do to your Tremor today? [2026 edition]

I suspect due to the recent hard "Arctic blast" I had a hood support strut fail. Not fun when you throw the hood open only to almost get caught in it falling back down. 😲 😲
I just went with Ford OEM replacements on both sides, kept the "good" driver's side. Pretty simple R&R process. If you think the shocks are hard to compress, try it on a hood strut. 😲😲

:cool::cool:☕☕🇺🇲🇺🇲🇺🇲🇺🇲
 
Hunt for rattle in dash part 3. Bought some felt backed tape this time, and took apart a lot more. Had to remove the pillars, banks idash, etc… so I could remove the top of the dash. Took out the instrument cluster, honestly, kind of sounded like noise I was chasing when I shook it.

Taped the crap out of the dash… test drive in a few minutes after everything put back together.

I wanted to pull apart the center console and do the same thing but ran out of time

View attachment 249169
View attachment 249170
I hate rattles and squeaks too, but damn!
 
Left the truck in the driveway to take a new toy to work

4.0
5 speed manual
4.88 gears and came with 35s which I upgraded to some 37x13.5 ridge graps
I found on Facebook for $500 for the set

Not gonna be an off-road rig so not too concerned about breaking an axle
IMG_7465.webp
 
Why is nothing ever easy, lol.

I finished installing Roadmaster Active Suspension on my F350 about an hour ago. Installing the RAS is a piece of cake, but removing the overload springs sure is a PIA. I just went for a test drive and the rear was definitely more comfortable and composed. I was measuring ride height after I got back and notice the Fox ATS steering stabilizer was hanging down after snapping the mounting plate in half...SMH. My guess is the spacer puts too much leverage on it. I'm curious if I can find a stronger after market mount.

Has anybody here had the same thing happen?
20260311_103715.webp
20260311_095641.webp
20260311_095708.webp
20260311_095713.webp
 
Why is nothing ever easy, lol.

I finished installing Roadmaster Active Suspension on my F350 about an hour ago. Installing the RAS is a piece of cake, but removing the overload springs sure is a PIA. I just went for a test drive and the rear was definitely more comfortable and composed. I was measuring ride height after I got back and notice the Fox ATS steering stabilizer was hanging down after snapping the mounting plate in half...SMH. My guess is the spacer puts too much leverage on it. I'm curious if I can find a stronger after market mount.

Has anybody here had the same thing happen?
View attachment 249355View attachment 249356View attachment 249357View attachment 249358
Sorry this happened to you my friend.

Maybe @mrmag00 can shed light since his ATS broke as well. Also, @DwnSth just installed his with what seems to be a different bracket. Check out the thread here:

Post in thread 'Fox ATS Stabilizer' https://www.fordtremor.com/threads/fox-ats-stabilizer.6236/post-534797

Have you considered getting a dual stabilizer? This is the third time I've read ATS breaking.
 
Sorry this happened to you my friend.

Maybe @mrmag00 can shed light since his ATS broke as well. Also, @DwnSth just installed his with what seems to be a different bracket. Check out the thread here:

Post in thread 'Fox ATS Stabilizer' https://www.fordtremor.com/threads/fox-ats-stabilizer.6236/post-534797

Have you considered getting a dual stabilizer? This is the third time I've read ATS breaking.
I have an Icon dual stabilizer system that I took off because it was insanely stiff (so stiff I needed large ratchet straps to compress to get into place). The 4x4 shop that did my alignment after I installed the suspension couldn't believe it either. Maybe other dual setups are better or Icon sent me shocks with the wrong valving (they stopped replying to me when I tried to remedy the issue). I assume dual stabilizers are supposed to still feel similar to stock or potentially better?
 
I have an Icon dual stabilizer system that I took off because it was insanely stiff (so stiff I needed large ratchet straps to compress to get into place). The 4x4 shop that did my alignment after I installed the suspension couldn't believe it either. Maybe other dual setups are better or Icon sent me shocks with the wrong valving (they stopped replying to me when I tried to remedy the issue). I assume dual stabilizers are supposed to still feel similar to stock or potentially better?
You may want to try the Fox 2.0 dual stabilizer. More even control and articulates well. You'll get varying opinions of course so it's your personal situation, budget, driving habits, etc that will set the course down the suspension rabbit hole.
 
Why is nothing ever easy, lol.

I finished installing Roadmaster Active Suspension on my F350 about an hour ago. Installing the RAS is a piece of cake, but removing the overload springs sure is a PIA. I just went for a test drive and the rear was definitely more comfortable and composed. I was measuring ride height after I got back and notice the Fox ATS steering stabilizer was hanging down after snapping the mounting plate in half...SMH. My guess is the spacer puts too much leverage on it. I'm curious if I can find a stronger after market mount.

Has anybody here had the same thing happen?
View attachment 249355View attachment 249356View attachment 249357View attachment 249358
IMG_1218.webp

Yeap mine did the same thing. Followed there installation instructions, suspension at full droop. Now I see they have a bracket that moves the mounting position.
 
@Gymkata - Based on the rust all the way through the break, it looks like it has been cracked and barely hanging on for a while.
My guess is that the Roadmaster just finished it off. I am not sure it has anything to do with the new parts. The design itself looks suspect. All of the shear force is on that single elbow, with no reinforcement. Pushing up (compressing the shock) may receive the benefit of having the frame rail to support it, but I doubt it. Cycling open, will pull hard on exactly where it fractured. Is the mount made of cast iron? That also seems like a poor decision for this type of part. Cast does not bend, it breaks.
 
@Gymkata - Based on the rust all the way through the break, it looks like it has been cracked and barely hanging on for a while.
My guess is that the Roadmaster just finished it off. I am not sure it has anything to do with the new parts. The design itself looks suspect. All of the shear force is on that single elbow, with no reinforcement. Pushing up (compressing the shock) may receive the benefit of having the frame rail to support it, but I doubt it. Cycling open, will pull hard on exactly where it fractured. Is the mount made of cast iron? That also seems like a poor decision for this type of part. Cast does not bend, it breaks.
Yes, everything you said is exactly what I've been thinking...except I don't see how the RAS in the rear affected the front during a light 5 minute test drive. I assume it was coincidence and broke when I made a slow full lock off camber turn at what is essentially a 310 degree right hander at a stop sign at the bottom of a steep hill.
 
View attachment 249369
Yeap mine did the same thing. Followed there installation instructions, suspension at full droop. Now I see they have a bracket that moves the mounting position.
Do you happen to have the part number for that bracket? I'm about to call Fox.
 
Click on the pdf link in this post, it might be there:

Post in thread 'Fox ATS Stabilizer' https://www.fordtremor.com/threads/fox-ats-stabilizer.6236/post-534822
I left a message at Fox and am awaiting a call back. I found pages for both the old and new design. I just need to verify the new mount is the only difference and hopefully get Fox to send me one.
Old design https://ridefox.com/products/ford-super-duty-2-0-ats-stabilizer-d1564c74
New design https://ridefox.com/products/ford-s...ke=Ford&model=F-350 Super Duty&drive_type=4WD
 
I left a message at Fox and am awaiting a call back. I found pages for both the old and new design. I just need to verify the new mount is the only difference and hopefully get Fox to send me one.
Old design https://ridefox.com/products/ford-super-duty-2-0-ats-stabilizer-d1564c74
New design https://ridefox.com/products/ford-super-duty-2-0-ats-stabilizer-198059c5?year=2022&make=Ford&model=F-350 Super Duty&drive_type=4WD
Gotcha, great info. Hopefully they get back to you. Maybe they'll send you the new design on the house!
 
Sorry this happened to you my friend.

Maybe @mrmag00 can shed light since his ATS broke as well. Also, @DwnSth just installed his with what seems to be a different bracket. Check out the thread here:

Post in thread 'Fox ATS Stabilizer' https://www.fordtremor.com/threads/fox-ats-stabilizer.6236/post-534797

Have you considered getting a dual stabilizer? This is the third time I've read ATS breaking.
Bolt is breaking because the install is wrong! You have to use the relocate bracket to properly install!
 
I left a message at Fox and am awaiting a call back. I found pages for both the old and new design. I just need to verify the new mount is the only difference and hopefully get Fox to send me one.
Old design https://ridefox.com/products/ford-super-duty-2-0-ats-stabilizer-d1564c74
New design https://ridefox.com/products/ford-super-duty-2-0-ats-stabilizer-198059c5?year=2022&make=Ford&model=F-350 Super Duty&drive_type=4WD
Good luck with that. I purchased the ats as well. Till I found out I need the bracket to install. Had to purchase separate. Bracket alone $200 plus
 
Bolt is breaking because the install is wrong! You have to use the relocate bracket to properly install!
I followed there installation instructions and it still broke.
 
Back
Top Bottom