🛠️ What did you do to your Tremor today? [2026 edition]

Could you please share what you find out as I went under my truck today to verify I have wear marks where the ATS is hitting the bar. Which is probably going to cause the same failure. Thanks.
I don’t believe there is a difference in design. Just adds the bracket.
 
Could you please share what you find out as I went under my truck today to verify I have wear marks where the ATS is hitting the bar. Which is probably going to cause the same failure. Thanks.
I'm starting to dislike Fox. They didn't contact me back and after speaking with several companies regarding the new ATS 2.0 mounting bracket I hear that everybody has issues with their lack of responsiveness to both clients and distributors. That aside, the links above are for one of the companies I found that sell the mounting bracket that in theory should be much sturdier than the stock mount and correct the geometry of how the ATS 2.0 works on the SD...at least according what's marketed. First link is for 2017-2022 SD and second link is for 2023-current. The price is steep, but I bit the bullet and ordered it yesterday. Based on what Stage 3 Motorsports shows on their website and what I was told over the phone, the ATS 2.0 is the same as before and only the mounting bracket has changed (I'm sure after many reported failures from Fox's poorly engineered spacer "solution" that over stresses what seems to be a relatively weak cast factory mount).
 
I'm starting to dislike Fox. They didn't contact me back and after speaking with several companies regarding the new ATS 2.0 mounting bracket I hear that everybody has issues with their lack of responsiveness to both clients and distributors. That aside, the links above are for one of the companies I found that sell the mounting bracket that in theory should be much sturdier than the stock mount and correct the geometry of how the ATS 2.0 works on the SD...at least according what's marketed. First link is for 2017-2022 SD and second link is for 2023-current. The price is steep, but I bit the bullet and ordered it yesterday. Based on what Stage 3 Motorsports shows on their website and what I was told over the phone, the ATS 2.0 is the same as before and only the mounting bracket has changed (I'm sure after many reported failures from Fox's poorly engineered spacer "solution" that over stresses what seems to be a relatively weak cast factory mount).
I’ve been saying it for a week. U have to have the bracket to install correctly! Will be my first and last purchase from Fox though. Tremors are not stock height therefore u must use bracket to correct geometry!
 
My Fox ATS worked fine with the Tremor. Trails from the Rockies to the desert, big rocks, small rocks no issues. I'm thinking some of you have cranked down on the damping circuit and the steering pump is fatiguing the bracket every time you turn
 
My Fox ATS worked fine with the Tremor. Trails from the Rockies to the desert, big rocks, small rocks no issues. I'm thinking some of you have cranked down on the damping circuit and the steering pump is fatiguing the bracket every time you turn
And can you tell our fellow Tremorites what you upgraded to!?
 
Had a matte black wrap done on the center of the hood today. Now I think I need to do the super duty letter in matte black.
IMG_1297.webp
IMG_1301.webp
IMG_1302.webp
IMG_1304.webp
IMG_1307.webp
IMG_1306.webp
 
More small stuff. Finished up my electronic mounts. Installed the bulletpoint rubigrid dash mount with an arm and t bolt adapter for the RV camera system. I added an arm with a magnet mount to the rubigrid center console mount for my 10.5” iPad. Also, a rear drivers seat latch and billet stubby antenna.

ETA: The regular matte colored bulletpoint arms have a blue tint. A perfect match for my Platinum blue accented interior.
 

Attachments

  • IMG_8156.webp
    IMG_8156.webp
    150.7 KB · Views: 44
  • IMG_8155.webp
    IMG_8155.webp
    198.9 KB · Views: 40
  • IMG_8154.webp
    IMG_8154.webp
    173 KB · Views: 41
  • IMG_8152.webp
    IMG_8152.webp
    227.4 KB · Views: 43
Last edited:
Looks good; these the black or argent grey? Remind me, what does one lose//gain by going with these? Outside the more robust construction and lock.
Black.

You lose the ability for your hubs to auto-lock using the vacuum system. Basically, before you step off into it, you'll have to get out and lock your hubs. OR, you'll be stepping INTO it TO lock your hubs. :)
 
those look great, what wheels?
 
those look great, what wheels?
Those are the KMC KM549 GRS:

 
Was this inspired by @Camarox2’s truck at the NorCal meetup? Looks great!
🤔 I refuse to answer and plead the 5th, I had been talking about it because it would match the tailgate I had done earlier. But seeing his got me thinking about it again.
IMG_0238.webp
 
Last edited:
I'm starting to dislike Fox. They didn't contact me back and after speaking with several companies regarding the new ATS 2.0 mounting bracket I hear that everybody has issues with their lack of responsiveness to both clients and distributors. That aside, the links above are for one of the companies I found that sell the mounting bracket that in theory should be much sturdier than the stock mount and correct the geometry of how the ATS 2.0 works on the SD...at least according what's marketed. First link is for 2017-2022 SD and second link is for 2023-current. The price is steep, but I bit the bullet and ordered it yesterday. Based on what Stage 3 Motorsports shows on their website and what I was told over the phone, the ATS 2.0 is the same as before and only the mounting bracket has changed (I'm sure after many reported failures from Fox's poorly engineered spacer "solution" that over stresses what seems to be a relatively weak cast factory mount).
Thank for responding back. Appreciate the links. Just to confirm, you are buying the bracket linked and using it to connect your stock Fox 2.0 ATS?
 
After 6 months and 8000 miles… the BFG KO3’s had to go. Switch to the Toyo R/T Pro’s. These ride so much better.
I really like the look of these RT Pros. I’d love to try the 38” 11.5R18 at some point but I worry about the snow.
 
I really like the look of these RT Pros. I’d love to try the 38” 11.5R18 at some point but I worry about the snow.
You can buy them without the snow!
 
Thank for responding back. Appreciate the links. Just to confirm, you are buying the bracket linked and using it to connect your stock Fox 2.0 ATS?
Yes
 
Back
Top Bottom