🛠️ What did you do to your Tremor today? [2026 edition]

So... I had requested at the time of sale, "low profile" stick-on wheel weights.

What I got are freaking 1/4" thick lead bricks that contact the brake caliper during a test fit.

The retailer, SD Wheel is apparently a division of Custom Offsets, and had I known...

Anyway, the correct wheel weight request never made it to the mount and balance crew in the warehouse, so now it's on me to correct the issue and try for some reimbursement.

Unbelievable. I waited two weeks for these things to get here; they bumped the delivery day TWICE, and now this. I just want these on my truck already.

Headed to America's Tire in the morning where I have an appointment for a re-balance. Going to load them up in the back and run down on my set of Tremor wheels/tires.

img_9832-webp.263633
 
Trying to decide on either a 5 inch or 7 inch drop B&W Hitch. I really don't want it dragging on anything.

Anyone got any pics of a 7" drop hitch on a Tremor with 37's?
I have the 7" and don't think the 5" drop would allow me to stow the ball. On 37's there's a lot of clearance to the ground. I do remove the hitch when going off-roading as a precaution.

1000030693.webp
 
I'm just gonna rando post in the busiest thread on here, because I don't think it's worthy of a dedicated thread.

2023+, is there a reusable gasket on the front diff?

Want to change my front diff oil at 30K and wondering if it is as easy as cracking the cover to drain the existing oil, retorquing the cover and then refilling?

Any thoughts.

If @MVI would just make a front cover with a drain bolt and sight glass, then this would be a non-issue....:-)
I believe @MVI does offer the front cover mod as well. At least I thought he showed me one he was working on.
 
I believe @MVI does offer the front cover mod as well. At least I thought he showed me one he was working on.
Indeed, yes We do offer a front cover with a M18 Bung and Gold Plug


1785334917156.webp
 
Summoned again by @Battle Born Offroad. The brand new Morimoto XRBG EVO LED headlights are installed and ready to brighten people's night 🤪.


View attachment 263320
View attachment 263321

These things are awesome. I love the start-up sequence as well as the RGB feature. The illegal superchargers are also installed. I get flashed enough as it is but these will take it to a whole notha level!

View attachment 263305
View attachment 263307

Chas doing the video shoot.

View attachment 263312
View attachment 263324
View attachment 263308
View attachment 263309View attachment 263310
View attachment 263311

I want to thank Morimoto for reaching out to @Battle Born Offroad. Chas and his crew needed a truck and voila! My baby got new flashers.

Thank you brothers for making this happen. Video content coming soon 👊.

View attachment 263326View attachment 263327
Those look great!

Cannot wait until they release the 2023+ ones.
 
  • Like
Reactions: MVI
Wanting to replacing my taillight and reverse light bulbs with LED's. Not super interested in running a resistor if I don't have to.

Are there any kits that don't require resistors?
 
Wanting to replacing my taillight and reverse light bulbs with LED's. Not super interested in running a resistor if I don't have to.

Are there any kits that don't require resistors?
These don't need resistors anymore. It does require a change in Forscan though, from incandescent to LED.
 
So... I had requested at the time of sale, "low profile" stick-on wheel weights.

What I got are freaking 1/4" thick lead bricks that contact the brake caliper during a test fit.

The retailer, SD Wheel is apparently a division of Custom Offsets, and had I known...

Anyway, the correct wheel weight request never made it to the mount and balance crew in the warehouse, so now it's on me to correct the issue and try for some reimbursement.

Unbelievable. I waited two weeks for these things to get here; they bumped the delivery day TWICE, and now this. I just want these on my truck already.

Headed to America's Tire in the morning where I have an appointment for a re-balance. Going to load them up in the back and run down on my set of Tremor wheels/tires.

img_9832-webp.263633
I really like these wheels. Great choice.

If you haven't had Nittos before, you may end up more disappointed in those than the wheel weights. lol. I have never had a good set of Nittos. I sincerely hope these work out better for you than the few sets I tried in the past did.
 
Depending on your trim, you may not even need to change.
I swapped to LED bulbs (rear signal & brake) in my Lariat. No changes needed.
Same here.
 
Those look great!

Cannot wait until they release the 2023+ ones.
Thank you my friend! They should be released soon. You will definitely enjoy them!
 
I really like these wheels. Great choice.


Thanks! For a "budget" wheel, they ain't bad! They actually remind me of a set of 6-spoke "Trailite" Motegi wheels I had on my F-150; same general spoke shape/proportion.

How I found them was through Go0gle's AI when I was asking about the Nitto Recon Grappler, and the required wheel diameter downsize I needed to make so I could have ANYTHING 37" in a 11.5" section width OTHER than the Ridge Grappler... and Go0gle produced an image of this Vision Flow 351 (available too in bronze and black).

My visit this morning to America's Tire was a success. Four guys were on my five wheels/tires that I fed from the bed of my truck - I was loaded up and back on the road - I sheetchew! knot! - 20 minutes later! LMAO.

Got the thin, 1/4-oz wheel weights, and guess what? SD Wheel only static balanced these five. When the crew this morning at America's Tire in Torrance were finished spin balancing, all five tires took MUCH less weight, a hallmark of the Recon Grappler.




If you haven't had Nittos before, you may end up more disappointed in those than the wheel weights. lol. I have never had a good set of Nittos. I sincerely hope these work out better for you than the few sets I tried in the past did.


As for NITTOs... yes. That may be true but it was true in the past, definitely. The Recon Grappler is maybe five years old, now? and it has a near-stellar rep across Jeep, Bronco and other truck owners for being smooth, quiet, balances well (using less weight) and when aired down is as good as anything else all-terrain.

Only complaints have been from a few who don't like them in the rain but the overall consensus is that those folks were aired too high.
 
Got home around 9 am from the tire balancing, then proceded to remove my OEM Tremor wheel/tire package (I do like the "Ebony black/machined" 2025 Tremor wheel, though) and before mounting the new 37" X 11.5 X 17 Nitto Recon Grapplers I cleaned the rest of the doublestick foam tape that held the 1-oz bricks of lead that were hitting my brake calipers.

I'll get some better pics here in the near future. Meanwhile...

IMG_9841.webp


IMG_9842.webp




A few days later...

IMG_9873.webp


IMG_9876.webp
 
Last edited:
Wanting to replacing my taillight and reverse light bulbs with LED's. Not super interested in running a resistor if I don't have to.

Are there any kits that don't require resistors?
I’ve contemplated doing the full swap to OEM LEDs, but that’s a bit more involved than bulbs. New lights, harness, FORscan, and potentially tapping a 12V constant source.

…but no resistors.

 
Last edited:
Got home around 9 am from the tire balancing, then proceded to remove my OEM Tremor wheel/tire package (I do like the "Ebony black/machined" 2025 Tremor wheel, though) and before mounting the new 37" X 11.5 X 17 Nitto Recon Grapplers I cleaned the rest of the doublestick foam tape that held the 1-oz bricks of lead that were hitting my brake calipers.

I'll get some better pics here in the near future. Meanwhile...

View attachment 263854

View attachment 263855
Looka really sharp my friend! Great combination of wheels and tires.
 
Back
Top Bottom