🛠️ What did you do to your Tremor today? [2026 edition]

Mine on City 4, was good enough to get me 68 in a 25, in a construction zone. There was no thought process involved. I passed the cop in his unmarked car. Not good for a CDL. It was the awakening that I needed. Last thing I had that ran like this, was my 2001 F150 Lightning. 😆
68 in a 25 & construction
only thing worse would have been a school zone

sorry to hear
I'm still hanging on to my cdl for some reason??????

glad you like the add-on!!!!
 
Those look sick love the amber. You gta stop posting shit like this making the rest of us want to spend our money 😆
Thank you brother. Sorry, it's the cheapest Amber so far 🤪.
 
Just cracked 20k. Purchase April 28, 2026.
That the drive from Calgary to Sandpoint doing a consistent 10km/hr over speed limit (5 mph). Such amazing fuel economy for this big truck.
Got the RSI full bin installed on my Smartcap at Cascade Rack in Bend Oregon. It was the first time the team there had installed the new version of the full molle bin. Turned out amazingly.
Great team of guys there at Cascade. Even saved my self approximately $250 getting in Oregon vs Canada (even with the exchange rate).
 

Attachments

  • IMG_4004.webp
    IMG_4004.webp
    84 KB · Views: 42
  • IMG_4067.webp
    IMG_4067.webp
    136 KB · Views: 39
Just cracked 20k. Purchase April 28, 2026.
That the drive from Calgary to Sandpoint doing a consistent 10km/hr over speed limit (5 mph). Such amazing fuel economy for this big truck.
Got the RSI full bin installed on my Smartcap at Cascade Rack in Bend Oregon. It was the first time the team there had installed the new version of the full molle bin. Turned out amazingly.
Great team of guys there at Cascade. Even saved my self approximately $250 getting in Oregon vs Canada (even with the exchange rate).
Nice! How much for the paper towel? 🤪
 
Just what I’ve posted in this mostly; I’ve definitely put way too much mental thought into this too…

I have the Swarfworks dual NMO and Starlink mount, replacing my 3rd Brake Light, so my antennas come right inside there, and are just fed down to behind the rear passenger seat. For a fender mount, I’d assume if you don’t go through the firewall, you’re looking at some of the rubber grommets in the floor. There’s one under the passenger footwell carpet, and another in the rear passenger corner that’s used for the sunroof drain - you might have it if you don’t have a sunroof.

I was hoping to avoid adding extra holes in the cab, so that’s where the NEOHIO cable comes in. (I know I’ll potentially get yelled at for not being direct to battery, but it’s working.) Plugs in behind the glovebox to the ProUpfit connection. Gives you 2x 50A (2x 25A lines per that can be linked for 50A each) grounded runs. Put that down through the passenger cable channel with a single line off an upfitter to fake an ignition sense line - switch on, radio thinks truck is on, switch off, happy wife without random radio chirps.

Radio itself is a Kenwood TK-7180 with remote head unit, as I really only need VHF up here for the resource roads I travel on for work. Took a chance on a couple of eBay sales and saved myself a bundle versus new. Just needed to get the antenna, and then as of last night, a new mic.

Since I have to two lines for power, and the two NMO lines, I’m hoping to eventually add a GRMS - Midland 50W, so I ran an Ethernet line and a USB-C through the headliner so I could mount the body of the Midland back with the Kenwood, and use the run cables as a mic port and extra USB-C (as the one on the unit is always powered, so it’ll give another charging port).

Ran the remote head cable up in the passenger footwell too - I’m rapidly running out of room there. Right now, it’s poking out below the glovebox so I could get it tested, and functional because I’ll be using it this weekend.

For a mic mount, I repurposed my ProClip mount up by the radio. Part of me is regretting loosing the MagSafe mount there and having my phone right there, but getting back into the habit of plugging it in will likely be better as it’ll free up WiFi for my Starlink.

As for mounting it in//on the console, I’ve currently got two plans of attack. And not sure which one I want to follow through with. It’ll likely depend on what I find when I pull the console back to work on it.

My original thought was that I replace the front cubby under the slider (where the USBs and wireless charger is) with the non-wireless one, which will give me enough room to hide the radio itself with a flush mount bracket, as well as a USB-C and Ethernet plug for the eventual GRMS.

From talking to folks here, and watching some videos, I was too sure if I’d have the space for the whole radio, hence the good eBay deals on the remote head unit.

Doing this obviously kills the wireless charging in my truck, but I still rock a iPhone Mini, so my phone is too small to use it anyhow. And then the radios are fully hidden unless in use. So I have the non wireless cubby here and ready to go.

But, my Mini is showing its age, and is starting to struggle hard, so with a potential phone change here where the wireless will come in handy for more than just my wife’s phone, I’m starting to consider putting the USB-C port in the wireless charger cubby to add a future power point there, and then mounting the Ethernet and Kenwood head in the drivers pocket, facing up.

I figure the final mounting won’t happen until next days off, so I’ll have time to put even more thought into that before it happens.

The guy that did my testing for me was impressed with the values I got all things considered, so maybe I helped change some minds. The same concerns were raised - not direct to battery for ground, 1/4 wave antenna with no grounding plane, etc. 😆

I am partially considering if I want to try out the COMPACtenna, and get that 1/4 wave height down to 9”, but not sure if the juice is worth the squeeze there.


I’m no HAM or radio expert at all, and even I question some of the points on the website, but the website screams evil genius who figured this shit out before anyone else and I feel I can trust it to work as claimed…
I am not sure the "direct to battery" is really a thing anymore in modern vehicles. A race radio retailer stocks the 25a version of my harness.
 
With the retractable tonneau usually closed, it was pretty dark in the bed of the truck. I added some LED light strips under the rails. VOILA- we have light.

At the same time I finished about 85% of the electrical wiring needed to add side and reverse lights. Once installed, they will come on automatically when in reverse and manually with the flip of an Upfitter switch.

Before/after photos of the light strips in the bed below.
 

Attachments

  • IMG_2119.webp
    IMG_2119.webp
    275.9 KB · Views: 56
  • IMG_2118.webp
    IMG_2118.webp
    528 KB · Views: 32
With the retractable tonneau usually closed, it was pretty dark in the bed of the truck. I added some LED light strips under the rails. VOILA- we have light.

At the same time I finished about 85% of the electrical wiring needed to add side and reverse lights. Once installed, they will come on automatically when in reverse and manually with the flip of an Upfitter switch.

Before/after photos of the light strips in the bed below.
Very nice. I did the same thing after the swing out tool boxes blocked all of the factory bed lighting. Makes a world of difference.

I also wired my reverse lights the same way. I have it wired to two upfitters with one being a dim mode and one a full bright mode. I find the dim mode useful when hitching up a trailer and launching a boat without being blinded.

I’ve got a few options available for sale for mounting reverse/rear corner lighting in the hitch tube if you’re looking for options.
 

Attachments

  • IMG_4169.webp
    IMG_4169.webp
    151.5 KB · Views: 26
Trying to decide on either a 5 inch or 7 inch drop B&W Hitch. I really don't want it dragging on anything.

Anyone got any pics of a 7" drop hitch on a Tremor with 37's?
 
Trying to decide on either a 5 inch or 7 inch drop B&W Hitch. I really don't want it dragging on anything.

Anyone got any pics of a 7" drop hitch on a Tremor with 37's?
I had a 7” that would drag on rare occasion, then swapped for a 5”. I have 35s and know you have 37s. I also have a Tremoooore so that is another factor. I think for most minimally lifted or trucks with the just larger tires, the 5” is ideal. “Not what she said” had to add this as I know @Optimus🤖 will chime in 🤣
 
IMG_7805.webp


Trying to decide on either a 5 inch or 7 inch drop B&W Hitch. I really don't want it dragging on anything.

Anyone got any pics of a 7" drop hitch on a Tremor with 37's?


No photo of what you're asking but an 8" drop hitch on 35s...

*scrape* .. as I knew it would. Little cargo camper was built to the ride height of an F150.

Until I rectify the trailer's lack of increased ride height, I remove the tongue jack for off-highway travel. That's what scrapes first, then the bottom of the ball.


IMG_7036.webp
 
Trying to decide on either a 5 inch or 7 inch drop B&W Hitch. I really don't want it dragging on anything.

Anyone got any pics of a 7" drop hitch on a Tremor with 37's?
I believe mine is a 7" on my 35's
 
I had a 7” that would drag on rare occasion, then swapped for a 5”. I have 35s and know you have 37s. I also have a Tremoooore so that is another factor. I think for most minimally lifted or trucks with the just larger tires, the 5” is ideal. “Not what she said” had to add this as I know @Optimus🤖 will chime in 🤣

I would love for a 5" to be ideal. Can't measure the boat trailer as the boat is in Kentucky and I am in MS.
 
Trying to decide on either a 5 inch or 7 inch drop B&W Hitch. I really don't want it dragging on anything.

Anyone got any pics of a 7" drop hitch on a Tremor with 37's?
You really need to have the trailer level, measure from the ground to where the ball sits, then measure where the truck sits to the receiver, calculate the tongue weight and how much it will pull the tail down, then calculate the drop of the hitch. My trailer was perfect with a 7.5" receiver and since B&W was 7, and the Weigh Safe was 8, I opted for the 8" Weigh Safe and used the appropriate mounting position. My other trailer requires a much higher hitch and although I can adjust the weigh safe, it leaves a lot of extra that could drag. So, I will be looking for the shorter hitch in the near future. Probably the 5".
 
View attachment 263619




No photo of what you're asking but an 8" drop hitch on 35s...

*scrape* .. as I knew it would. Little cargo camper was built to the ride height of an F150.

Until I rectify the trailer's lack of increased ride height, I remove the tongue jack for off-highway travel. That's what scrapes first, then the bottom of the ball.


View attachment 263621
Perfect leveling. 👍
 
Trying to decide on either a 5 inch or 7 inch drop B&W Hitch. I really don't want it dragging on anything.

Anyone got any pics of a 7" drop hitch on a Tremor with 37's?
Trailer should be towed level, so you may need a couple different drop hitches.
 
Back
Top Bottom