🛠️ What did you do to your Tremor today? [2026 edition]

I'm just gonna rando post in the busiest thread on here, because I don't think it's worthy of a dedicated thread.

2023+, is there a reusable gasket on the front diff?

Want to change my front diff oil at 30K and wondering if it is as easy as cracking the cover to drain the existing oil, retorquing the cover and then refilling?

Any thoughts.

If @MVI would just make a front cover with a drain bolt and sight glass, then this would be a non-issue....:-)
 
Hahaha. Whadda coinkydink! I was at Harbor Frieght earlier, mulling over dead blow hammer weights. I came home w/ a 3-pounder for general usages. Might have to whack on it a bit harder is all. "Make sure the splines (the addendums n' th' dedendums) are aligned" before wailin' on it.

I also have to press or pound the Delrin bush into each billet frame mount bracket. Wish I had a bench top press/arbor press for that one. I looked but all Hazard Fraught had were floor-standing presses.









I can see how it would be, just from reading the instructions!

Please tell us it was worth it, though. That your ride quality improved a tad and your front suspension felt more "supple".

:love:


I think I said in another thread that it was evolutionary and not revolutionary. I would stand behind that statement. It's not dramatic, but there is a bit of improvement there.

For my money, disregard the included instructions. Assemble the whole damn thing off the truck and then use a couple of jackstands to hold it close to in place and finagle into position as one unit.

I originally followed the included instructions, and I could not get the damned bar ends to go on the torsion bar with it already bolted in place. Removed it, placed it on the ground and used a BFH along with some wooden blocks to get it fully assembled without marring it all to hell. Then used jack stands to hold it up to frame while I got it bolted up to the frame. I ended up using a bit of double sided Gorilla tape to hold the backing plates in place on the frame in order to get the mounting bolts started.

Good luck.
 
Thank you!

Yesterday after reading about the difficulty, I looked at the wrinkle finish powdercoat on the bar's lever arms... and spent about 20 mins each arm w/ a very small file of a narrow "diamond" shape, and without removing spline material removed 99% of the invading powdercoat, then test fitted just starting the arms onto each end of the bar with some success.

I may get to that tomorrow or next, because I also have the good fortune to be dealing w/ a new set of wheels and tires that just arrived. If only! I were 50 again! Hahaha. I could get all five wheels/tires installed and the bar this afternoon.

But I'm old, and... I wish to do one "mod" at a time. Bar first, drive on it a bit along some familiar routes and road surfaces, then swap my new tires on Wednesday... or vice versa. These new wheels/tires appear better than what I'd hoped, so I'm extry ex-cited.

Thank you for your report! It is very helpful. 🏁
 
I'm just gonna rando post in the busiest thread on here, because I don't think it's worthy of a dedicated thread.

2023+, is there a reusable gasket on the front diff?

Want to change my front diff oil at 30K and wondering if it is as easy as cracking the cover to drain the existing oil, retorquing the cover and then refilling?

Any thoughts.

If @MVI would just make a front cover with a drain bolt and sight glass, then this would be a non-issue....:-)
Yes there is a reusable gasket on the front.
 
(I don't even know what threads I'm replying to... only responding to bell notifications lmao)

Me again.

THEY'RE HEEEEEEERE! (waited two weeks!)

And here's one of them:

IMG_9832.webp


I'll be 'round back unwrapping the other four.
 
(I don't even know what threads I'm replying to... only responding to bell notifications lmao)

Me again.

THEY'RE HEEEEEEERE! (waited two weeks!)

And here's one of them:

View attachment 263633

I'll be 'round back unwrapping the other four.
Lovely! What color is that wheel? It looks silver, is it matte? I see they are Vision, what model #?
 
I had a 7” that would drag on rare occasion, then swapped for a 5”. I have 35s and know you have 37s. I also have a Tremoooore so that is another factor. I think for most minimally lifted or trucks with the just larger tires, the 5” is ideal. “Not what she said” had to add this as I know @Optimus🤖 will chime in 🤣
This is exactly why I always recommend the adjustable B&W. It’s a grower, not a shower. You can keep it tucked up nice and tight when you're just cruising around town, and drop it down to the full 7 when it's time to do some heavy lifting. Either way, just make sure you use plenty of grease on the ball before you stick it in the receiver 🤪.
 
Trying to decide on either a 5 inch or 7 inch drop B&W Hitch. I really don't want it dragging on anything.

Anyone got any pics of a 7" drop hitch on a Tremor with 37's?

Ive got the 7" and honestly would have been fine with the 5" for the trailers I tow.
 
Lovely! What color is that wheel? It looks silver, is it matte? I see they are Vision, what model #?


Thanks! The color is Satin Grey. The wheel style or model is Flow 351.
Specs are 17 X 8.5, +18mm - hub bore and lug pattern for our years' Super Duty as is the load capacity. Screamin' deal for a decent looking wheel.

Tire and wheel combo from SD Wheel
 
Trying to decide on either a 5 inch or 7 inch drop B&W Hitch. I really don't want it dragging on anything.

Anyone got any pics of a 7" drop hitch on a Tremor with 37's?

Depending on your receiver hitch size, I'm thinking the latter is better. So go with the 7"+ drop only because you get the absolute most out of the cost. You can flip the whole unit over if really needed cause of dragging. Not to mention adding any sort of lift will only add more rear clearance. :unsure: :unsure:

:cool::cool::coffee::coffee:🇺🇲🇺🇲🇺🇲🇺🇲
 
With the retractable tonneau usually closed, it was pretty dark in the bed of the truck. I added some LED light strips under the rails. VOILA- we have light.

At the same time I finished about 85% of the electrical wiring needed to add side and reverse lights. Once installed, they will come on automatically when in reverse and manually with the flip of an Upfitter switch.

Before/after photos of the light strips in the bed below.
What are those STABIL bottle? holders on each side? The lights look great.
 
Yesterday's fill up 52 gal. =$258.96

Before leaving pice checked for lowest price, leaving the house it was 4.98 @9AM 20 minutes later at the pump 5.08

1785236563973.webp
 
What are those STABIL bottle? holders on each side? The lights look great.
This is the holder @bigfoot21075:
 
View attachment 263671
Lowered the tire pressure to 48F and 43R.

Absolutely love this truck.
Those Nomads look 🔥🔥🔥

Also, I ran that same tire (37x12.5r17 Toyo ATIII) on my old gasser, 45F/38R is where it's at. Chalk test suggest I could go lower, but I found that any less than that in the front and I noticed the shoulder of the tire started to get a little chewed up.
 
(I don't even know what threads I'm replying to... only responding to bell notifications lmao)

Me again.

THEY'RE HEEEEEEERE! (waited two weeks!)

And here's one of them:

View attachment 263633

I'll be 'round back unwrapping the other four.
That’s a nice combo, unfortunately I bought my foundation rims 1 month before they offered polish aluminum.
 
Those Nomads look 🔥🔥🔥

Also, I ran that same tire (37x12.5r17 Toyo ATIII) on my old gasser, 45F/38R is where it's at. Chalk test suggest I could go lower, but I found that any less than that in the front and I noticed the shoulder of the tire started to get a little chewed up.
Thanks! Super underrated wheels for these trucks.
 
Back
Top Bottom