🛠️ What did you do to your Tremor today? [2026 edition]

If so, reading the 285/75/18 chart, I look at Single Load? Not Dual? Im unsure of what they mean since dual shows a lower max weight. So reasonably, yeah- I MAY have a 6400 GAWR on the rear and should find the pressure on the SINGLE chart that would cover 3200lbs since it is a SWR with 2 wheels per axle?


You are a SRW, so, yes: single.

I'd say you've got it right. What's the rec pressure? 50 psi?
 
You are a SRW, so, yes: single.

Are you looking for a suitable tire? or just a cold inflation pressure?
Just pressures. A kind soul (@Dpsmedic )sent me the chart for my stock tire.

Also edited the huge “math” post and think that even towing, 50 is fine since the chart shows 3000lbs there. I’ll probably tow at 55 and ride empty at 47 cold depending on comfort and stability. but now I know! Still gotta weigh with the trailer hooked up!
 
Last edited:
I ninja'd an edit:


I'd say you've got it right. What's the rec pressure? 50 psi?

If I'm off because I'm throwing darts, it's because I'm kinda p.o.'d that my tire/wheel delivery sched'd for today was just moved to Monday. For the second time.

I do not recommend SD Wheel's choice of shippers. What a bunch of rooke flakes...
 
I ninja'd an edit:




If I'm off because I'm throwing darts, it's because I'm kinda p.o.'d that my tire/wheel delivery sched'd for today was just moved to Monday. For the second time.

I do not recommend SD Wheel's choice of shippers. What a bunch of rooke flakes...
That sucks! That’s a huge and fun upgrade to have snatched away!
 
Update BCM (Plain English)
Connect FORScan, go to Configuration and Programming, and select BdyCM (not the As-Built format). Find Tire Circumference. Change the value to your new size in millimeters (for 37s, 2799 mm is the proven sweet spot). Click Write and cycle the ignition when prompted. (Note: You might see a warning light here — don't panic, it's normal).

Run the PCM Relearn
Go to Central Configuration, select PCM Module Relearn, and run the procedure. Follow the on-screen ignition cycling prompts exactly.

Run the TCM Relearn (If Equipped)
Select TCM Module Relearn and run it. Since you have the 7.3L gas, the TCM might be integrated into the PCM, but if FORScan shows a separate TCM relearn for your 2026, run it. If it fails, ensure the ignition is ON but the engine is OFF.

Run the AWD Initialization
Crucial for 2023+ Super Duties
Select AWD Module Initialization/Relearn and follow the prompts. Skipping this step is what causes the stubborn AWD/wrench light for most people!

Clear All DTCs
Go to the DTC tab in FORScan and clear all codes. Cycle the ignition one last time. If a TCM P0160 code pops up and won't clear, shut the truck off, turn the ignition back on (engine off), and clear the codes again.
Thanks Optimus, I was just about to search for the steps to update my tire size closer to 38s
 
Thanks Optimus, I was just about to search for the steps to update my tire size closer to 38s
@Ranger97 I am not sure they have fixed forscan for the 23+ trucks to allow for this size tire. I believe it caps off at a lower value/size. There are some good threads on this, please read up on them. Some talk about changing other values as well, but this can lead to errors.

If you exceed the threshold, I beleive it can also lead to errors. Do a full back up before you change anything!
 
Installed Fox shocks! Now tomorrow, I have to go get some tools that I needed today.
What’s your use case? I’m not a mudder or rock-climber but I do get out into the woods and my pastures. Not sure I need anything or if I am a ticking time bomb. Lol


In other news, I got the courage to get Forscan going. I saved as built, got the Forscan license and took a deep breath. I was too skeered to mess with much but changed TPMS thresholds (to 42 with plans to roll daily at 45 and tow at weights that fit the chart) AND activated Bambi mode.
 
So my plan is to upgrade my grill... Anything I should be concerned about?
1784946924445.webp
 
@Ranger97 I am not sure they have fixed forscan for the 23+ trucks to allow for this size tire. I believe it caps off at a lower value/size. There are some good threads on this, please read up on them. Some talk about changing other values as well, but this can lead to errors.

If you exceed the threshold, I beleive it can also lead to errors. Do a full back up before you change anything!
Thanks for the heads up, I saw this a little too late. I only change it to 2799, relearned the pcm but I don’t have a tcm listed. I’ve read it’s due the gas motors not having a separate tcm from the pcm.

Looks like it’s tomorrow’s problem.
 
If so, reading the 285/75/18 chart, I look at Single Load? Not Dual? Im unsure of what they mean since dual shows a lower max weight. So reasonably, yeah- I MAY have a 6000 GAWR on the rear and should find the pressure on the SINGLE chart that would cover 3000lbs since it is a SWR with 2 wheels per axle?

Yes, single load means a single tire. Hence SRW or DRW are the values they are providing you on the tire chart.

:cool: :cool: :coffee: :coffee: 🇺🇲 🇺🇲 🇺🇲 🇺🇲
 
Yes, single load means a single tire. Hence SRW or DRW are the values they are providing you on the tire chart.

:cool: :cool: :coffee: :coffee: 🇺🇲 🇺🇲 🇺🇲 🇺🇲
Yeah that would be a good way for me to have asked. I had meetings all day, ok! Lol
 
A recovery mount works about as well and provides a better recovery point if needed. I have this in 2.5. Not sure they make 3 inch, but at least then only one reducer https://a.co/d/04oymI76
I use the Bulletproof 3” recovery hitch. It’s heavy duty and also doubles as rear end protection.
 
Summoned again by @Battle Born Offroad. The brand new Morimoto XRBG EVO LED headlights are installed and ready to brighten people's night 🤪.


View attachment 263320
View attachment 263321

These things are awesome. I love the start-up sequence as well as the RGB feature. The illegal superchargers are also installed. I get flashed enough as it is but these will take it to a whole notha level!

View attachment 263305
View attachment 263307

Chas doing the video shoot.

View attachment 263312
View attachment 263324
View attachment 263308
View attachment 263309View attachment 263310
View attachment 263311

I want to thank Morimoto for reaching out to @Battle Born Offroad. Chas and his crew needed a truck and voila! My baby got new flashers.

Thank you brothers for making this happen. Video content coming soon 👊.

View attachment 263326View attachment 263327
These look fantastic! Another upgrade I am jealous of, well done my friend!
 
So my plan is to upgrade my grill... Anything I should be concerned about?
View attachment 263356
Just be careful with the hoop part of the grill there are 4 clips on the headlights that they clip into, very fragile. My advice is to use a trim tool and pull straight out to release them.
 
Update BCM (Plain English)
Connect FORScan, go to Configuration and Programming, and select BdyCM (not the As-Built format). Find Tire Circumference. Change the value to your new size in millimeters (for 37s, 2799 mm is the proven sweet spot). Click Write and cycle the ignition when prompted. (Note: You might see a warning light here — don't panic, it's normal).

Run the PCM Relearn
Go to Central Configuration, select PCM Module Relearn, and run the procedure. Follow the on-screen ignition cycling prompts exactly.

Run the TCM Relearn (If Equipped)
Select TCM Module Relearn and run it. Since you have the 7.3L gas, the TCM might be integrated into the PCM, but if FORScan shows a separate TCM relearn for your 2026, run it. If it fails, ensure the ignition is ON but the engine is OFF.

Run the AWD Initialization
Crucial for 2023+ Super Duties
Select AWD Module Initialization/Relearn and follow the prompts. Skipping this step is what causes the stubborn AWD/wrench light for most people!

Clear All DTCs
Go to the DTC tab in FORScan and clear all codes. Cycle the ignition one last time. If a TCM P0160 code pops up and won't clear, shut the truck off, turn the ignition back on (engine off), and clear the codes again.
This is a great write up, I got my truck all lined out now to 37s, one thing to add, the 2025 7.3 will require the extended license from Forscan to update the AWD MODULE.
 
Summoned again by @Battle Born Offroad. The brand new Morimoto XRBG EVO LED headlights are installed and ready to brighten people's night 🤪.


View attachment 263320
View attachment 263321

These things are awesome. I love the start-up sequence as well as the RGB feature. The illegal superchargers are also installed. I get flashed enough as it is but these will take it to a whole notha level!

View attachment 263305
View attachment 263307

Chas doing the video shoot.

View attachment 263312
View attachment 263324
View attachment 263308
View attachment 263309View attachment 263310
View attachment 263311

I want to thank Morimoto for reaching out to @Battle Born Offroad. Chas and his crew needed a truck and voila! My baby got new flashers.

Thank you brothers for making this happen. Video content coming soon 👊.

View attachment 263326View attachment 263327
Eventually I need to get a set! Factory ford lights sucks with them peeling and looking like crap. And on my second set.

These look awesome.
 
This is a great write up, I got my truck all lined out now to 37s, one thing to add, the 2025 7.3 will require the extended license from Forscan to update the AWD MODULE.
AWD module? y'all have AWD? 🤔
 
Back
Top Bottom