🛠️ What did you do to your Tremor today? [2026 edition]

@Apples
What I was trying to say earlier was that I could not conceive of buying a Fumoto valve that didn't accept tubing. That was the main reason for its purchase! and not for just a drain switch.

That’s exactly why I got the F316L was the hose nipple. Like someone said just put a hose on the nipple and put the hose in the jug drain into old jugs and done.
 
like a true autist, anything worth doing is worth overdoing. The tire is damn close to the exhaust shield but it’s not touching at least. Hopefully the titanium wrap will further insulate it a bit.


IMG_6554.webp
IMG_6556.webp
IMG_6562.webp
IMG_6563.webp
IMG_6564.webp
IMG_6561.webp
 
Also if anyone wants the Curt hitch I removed you can have it for free. Could possibly be modified to fit a bigger tire or something. Or cut it up and make something for a front receiver.
 
Well said screw it and had Trend Setters install the Juggernaut skid plate called them yesterday and Jordan got me in this morning. Great group of folks there. Was going to do it in the driveway but decided otherwise. Was actually really reasonable price wise for the install, and was done in less than an hour. Dan let take pictures while he installed it and explained how he was going to secure the coolant line, the mount for the skid plate uses that hole so he put a P clamp on it. He even greased my Carli shackles for me while it was on the lift.
IMG_1716.webp
IMG_1720.webp
 
Lord Mago0, Duke of Spokane -

img_1720-webp.261287




Now we gotta get the steering linkages protected! I know there's a skid setup out there, I just forget who it is.

Btw, I have the Talons Garage ready to go on (after a trans vb and pan swap). Gotta git R done before September!



Bison in A Major -

img_6564-webp.261277



That should take care of it! I am confident in your application of said heat band-ahges.

When did you slap those RT-01s on there? and how do you like 'em so far?

🏁
 
^ ^ ^ Now we gotta get the steering linkages protected! I know there's a skid setup out there, I just forget who it is.

Btw, I have the Talons Garage ready to go on (after a trans vb and pan swap). Gotta git R done before September!
APC and riot truck upfitters have linkage protection 😉
I’m not sure if us mere peasants can actually buy rthe parts individually, but it’s worth a try.
 
Lord Mago0, Duke of Spokane -

img_1720-webp.261287




Now we gotta get the steering linkages protected! I know there's a skid setup out there, I just forget who it is.

Btw, I have the Talons Garage ready to go on (after a trans vb and pan swap). Gotta git R done before September!



Bison in A Major -

img_6564-webp.261277



That should take care of it! I am confident in your application of said heat band-ahges.

When did you slap those RT-01s on there? and how do you like 'em so far?

🏁
I have 7k on these and 7k on the 35’s on the 6.7 I traded in on this one. Aside from being super true to size, no complaints at all. Super solid. I anticipate - especially with the 5 tire rotation - getting the 50k warrantied miles out of these things.
 
like a true autist, anything worth doing is worth overdoing. The tire is damn close to the exhaust shield but it’s not touching at least. Hopefully the titanium wrap will further insulate it a bit.


View attachment 261273View attachment 261274View attachment 261275View attachment 261276View attachment 261277View attachment 261278
I had that exact same problem and wrapped the exhaust with titanium wrap with high heat silicon spray on top. The metal attachment point for the y strap for the tire wore through the wrap and the exhaust melted the nylon of the strap. Took it to an exhaust shop and they adjusted the exhaust hangar to take what was less than 0.25 inch (zero when wrapped) and gave me about 1.5" of clearance.

I still wrapped the exhaust and then added an additional layer of aluminum heat shielding around the section of the exhaust closet to the tire.
 
I had that exact same problem and wrapped the exhaust with titanium wrap with high heat silicon spray on top. The metal attachment point for the y strap for the tire wore through the wrap and the exhaust melted the nylon of the strap. Took it to an exhaust shop and they adjusted the exhaust hangar to take what was less than 0.25 inch (zero when wrapped) and gave me about 1.5" of clearance.

I still wrapped the exhaust and then added an additional layer of aluminum heat shielding around the section of the exhaust closet to the tire.


Shoot I will keep my eye on that and I dig your level of concern. I don’t think mine is touching but then again everything’s gotta settle and be rechecked
 
Doesn’t the CJC/Banks trophy hitch exhaust give more room?
it do

But I like this looking stock. I forgot I’m probably going to delete it next year at which point the EGT’s should never be as ridiculous as regen makes them.
 
Just a little "sneaky" work cause I'm not feeling the love to remove some stuff under the hood. 🚨🚨🚨🚨

PSA : There were no feet/toes captured or harmed when these pics were taken. 🤣🤣🤣🤣🤣

IMG_4560.webp


IMG_4559.webp


IMG_4558.webp


IMG_4557.webp


:cool::cool:☕☕🇺🇲🇺🇲🇺🇲🇺🇲
 
Back
Top Bottom