🛠️ What did you do to your Tremor today? [2026 edition]

Pipe installed, all good to go. Test drive done, nothing to note from the install work. Good to go for more miles!! Decided to stop and get some....

IMG_4567.webp


:cool: :cool: 🇺🇲 🇺🇲 🇺🇲 🇺🇲
 
Trying to explain to my wife that it’s not weird to have a full set of wheels and tires ready for a truck that isn’t even in the driveway.

Anyways, ordered 38x11.50r17 RT Trails in preparation. Just gotta order a spare 37x12.50 AT3 whenever the truck actually gets here.
 
Trying to explain to my wife that it’s not weird to have a full set of wheels and tires ready for a truck that isn’t even in the driveway.

Anyways, ordered 38x11.50r17 RT Trails in preparation. Just gotta order a spare 37x12.50 AT3 whenever the truck actually gets here.
I mean you had an engagement ring secured before you proposed right? Same deal
 
Waiting for the updated ride difference?

As many have said here on the forum, the Tremor uses the rear leaf springs of a 350, with the high capacity trailer towing package. My goal was not to make it ride like a Cadillac, but simply to take the edge off the harsh bed-hopping when running unloaded.

The project was fully funded by my wife, with whom the request originated.

The combination of the Sulastic shackles and the Fox HTO shocks does seem to have removed a good bit of the harshness.

In my rudimentary approach, I downloaded an app called Vibrometer on my iPhone. It uses the accelerometer to determine g-force, shock, and vibration amplitude. I launched the app and ran across all the local potholes and bumps in my usual routes to get a baseline for stock. I then swapped in the shackles and shocks and ran the same stretch of road again, and noted that the reaction to those same impacts was measurably lower. All this was on the Wildpeak AT4W tires, kept at a steady 50 PSI throughout, so the comparison was apples to apples.

So yes, scientifically speaking, there is a reduction in the reaction transmitted to the frame through the tires on impact.

Throwing all that data out the window, though, my wife says it rides smoother, and that is really all that matters.
 
Last edited:
Upped my 'fitters w/ some exten-z0rs.

IMG_9619.webp


IMG_9620.webp


IMG_9622.webp


IMG_9624.webp



Now I'm ready to power up the second pair of in-bumper LEDs from Diode Dynamics that are bolted onto some BMC Lights bumper bracket shenanigans.

IMG_9596.webp


IMG_9592.webp
 
Last edited:
Finished this up in the morning on the 4th before heading up to the lake.

Installed the BuiltRight strap for the rear seat and an F550 OEM red 6-Ton bottle jack on the drivers side. It will bolt right up to the stock location but I have an ARB compressor over there. And from my experience the OEM mechanical one is useless.

Designed and printed this bracket which slots into the OEM bracket, mounts the to an existing hole location, and uses the stud for the sub. Along with a support for the opposing side that will grip the carpet. Used the OEM bolt (if you have the pro power) to hold the carpet support. I didnt want to use a selftapping screw into the thin aluminum.

This bracket works really well and is pretty solid.

1783349802654.webp


1783350021258.webp

1783350068180.webp

1783349875280.webp

1783349908042.webp

1783349933957.webp

1783349948786.webp
 
Last edited:
@Apples is that a harness you made or something that can be bought? Looks good.

Forum member @Cblaxx19 made them, but they are not currently on his website.

Forum member @trmrzla sells a different option on his website:
 
While technically it didn't happen today. I spent Friday morning finally installing my Squadron 2.0/SAE kit in my truck.
Hooked SAE to fog lights.
Built a harness to grab the high beam signal to trigger a relay supplied from upfitter 1 for 2.0's.
Happy with the SAE lights so far, i need to stay up past 830 and get the 2.0 aimed in the dark.
Had issues with the BD pem nuts not staying in their bracket. Used some hardware I had on hand instead.
20260703_105106.webp
20260703_092821.webp
20260628_080243.webp
20260628_081040.webp
 
Finished this up in the morning on the 4th before heading up to the lake.

Installed the BuiltRight strap for the rear seat and an F550 OEM red 6-Ton bottle jack on the drivers side. It will bolt right up to the stock location but I have an ARB compressor over there. And from my experience the OEM mechanical one is useless.

Designed and printed this bracket which slots into the OEM bracket, mounts the to an existing hole location, and uses the stud for the sub. Along with a support for the opposing side that will grip the carpet. Used the OEM bolt (if you have the pro power) to hold the carpet support. I didnt want to use a selftapping screw into the thin aluminum.

This thing works really well and is pretty solid.

View attachment 261585

View attachment 261591
View attachment 261592
View attachment 261587
View attachment 261588
View attachment 261589
View attachment 261590
Does that bottle jack lift high enough to install an inflated tire? Have you tried it?
 
Does that bottle jack lift high enough to install an inflated tire? Have you tried it?
I havent tried it but I will go out and give it a shot later today. This is from the ebay listing. Looks like 17" extended length.

1783353949506.webp


EDIT:
Aaaaand by later today I just went out and tried it. On my 35" Wildpeak AT4 I get it off the ground about 1.5-2" from the axle tube. Caviat my tire does sit in a bit of a divot. I can try it again on a flater spot another time.
1783356073389.webp
 
Last edited:
My truck is at the dealership getting the CP4 recall handled. 🤞🏻this is a permanent solution. We have lost 5 ambulances all with 160,000 miles to CP4 failures.

They have a beautiful Raptor R sitting there though……. If I didn’t need to tow I would definitely consider it.
 
Thank you to KR3 for getting the answer to @nacanitihs

CB Lighting Designs


I saw CB's thread or post, here, right after I started thinking of making my own harness (it's not difficult and would be wholly satisfying if only it weren't slightly tedious and very time consuming - I waste enough time as it is) to the upfitters' wiring. I like it because it collects all grounds and puts them right onto the battery, and that all weatherpak connectors were of seeming great quality, plus the 10ga stranded wire.

I later received a query from another purveyor for a similar product asking me why I chose CB's... when it dawned on me that I never realized there were options. Just happened to see CB's product first, is all.




Built a harness to grab the high beam signal to trigger a relay supplied from upfitter 1 for 2.0's.


Always a good idea, and one I want to get to. Eventually. :ROFLMAO:

I have been pondering this approach to wiring my new Diode Dynamics C2 Sport white driving lights. The relay is something I did on a '60s Ford car so I could shut the high beams down with the floor-mounted foot-button high beam switch.

That was a four-headlight car in which I stuck 100W sealed beam spot lights in as the brights next to flat fresnel Hella H4 quartz halogen lamps. Those sealed beam spots were so freaking bright you could have a nighttime ballgame using them.
 
Ordered a Fumoto valve for the first oil change.

Delivery date moved up twice during the long weekend. 7/10-7/16 now!
Any know how long PDI takes at Granger?
 
Back
Top Bottom