🛠️ What did you do to your Tremor today? [2026 edition]

Heh, yeah, those frost leaves are brutal. You liking the shocks overall?
I honestly wouldn’t want to imagine this drive without these DSC shocks, I do have the 2.5 HTO in the rear and could see an easy justification for rear dsc if I was driving like this every day
But it’s very fun to be able to drive across this stuff at speed and not feel like my kindney is being removed through the seat bottom while maintaining control the truck
 
I honestly wouldn’t want to imagine this drive without these DSC shocks, I do have the 2.5 HTO in the rear and could see an easy justification for rear dsc if I was driving like this every day
But it’s very fun to be able to drive across this stuff at speed and not feel like my kindney is being removed through the seat bottom while maintaining control the truck
I recently got the 2.5 DSC's for the rear. Pics to follow soon!
 
I know a guy that might have one on his truck! 😂
Never seen it...
1000011564.webp
 
What do you do with a busted airhose? Make 2.
I ordered a couple of Haltec lock on chucks. Hit the Depot and bought a manifold and various fittings.
I think this is perfect. I only need 2 simultaneously because I tow and can use it on the trailers too. The little Ryobi is a workhorse.
IMG_8611.webp
IMG_8612.webp
IMG_8613.webp
IMG_8614.webp
 
What do you do with a busted airhose? Make 2.
I ordered a couple of Haltec lock on chucks. Hit the Depot and bought a manifold and various fittings.
I think this is perfect. I only need 2 simultaneously because I tow and can use it on the trailers too. The little Ryobi is a workhorse.
View attachment 259043View attachment 259044View attachment 259045View attachment 259046
i have 3 tips for ya, if i may???

1) i see the valve stem cap on your tire. put those in your pocket. so, if you get distracted or in a hurry & forget to put them back on. at least you didn't lose them too.

2) with that much hose, slap another "T" in there & get all 4 tires at the same time.

3) i haven't dealt with a compressor with a tank but a 1 gallon tank couldn't help that much. i looked up your Ryobi at 2.6cfm, off-roading airing up would be painful waiting to get all 4 tires back to hiway pressure. thor lightning & other compressors with 10.6cfm or more can save you a lot of time.

plus an anderson plug to run off the truck battery/electrical system to insure an endless air supply could be another lifesaver.

just sayin
for what it's worth
🤷🏻‍♂️
👍
 
i have 3 tips for ya, if i may???

1) i see the valve stem cap on your tire. put those in your pocket. so, if you get distracted or in a hurry & forget to put them back on. at least you didn't lose them too.

2) with that much hose, slap another "T" in there & get all 4 tires at the same time.

3) i haven't dealt with a compressor with a tank but a 1 gallon tank couldn't help that much. i looked up your Ryobi at 2.6cfm, off-roading airing up would be painful waiting to get all 4 tires back to hiway pressure. thor lightning & other compressors with 10.6cfm or more can save you a lot of time.

plus an anderson plug to run off the truck battery/electrical system to insure an endless air supply could be another lifesaver.

just sayin
for what it's worth
🤷🏻‍♂️
👍
I greatly appreciate the tips!
I thought about the 4 tires at once but there are times that I need different pressures in the fronts and the rears for towing.

I plan on installing onboard air and all the bells and whistles eventually. I have a 6 battery Ryobi ONE+HP charger, 1/2" impact driver and sockets on board. This all works for now.

I do want to run power to the rear, 12V and 110. My son in law has the Pro Power On Board his snowplow 250 and I'm envious.
 
With the Haltecs if there the closed ones like I purchased below, with a T one goes to the front and the end on the rear. I just unhook the front ones when it gets to 45psi and continue to fill the rears till I get them to 50psi.

 
With the Haltecs if there the closed ones like I purchased below, with a T one goes to the front and the end on the rear. I just unhook the front ones when it gets to 45psi and continue to fill the rears till I get them to 50psi.

Well yea! Linear thinking on my part. I may just order a couple of more Haltecs and be done with it.
 
Got the RSI Smart Cap and Ranchhand installed today. Next project is going to be Chrome delete, and paint match trim of smart cap.
10947.webp
 
I greatly appreciate the tips!
I thought about the 4 tires at once but there are times that I need different pressures in the fronts and the rears for towing.

I plan on installing onboard air and all the bells and whistles eventually. I have a 6 battery Ryobi ONE+HP charger, 1/2" impact driver and sockets on board. This all works for now.

I do want to run power to the rear, 12V and 110. My son in law has the Pro Power On Board his snowplow 250 and I'm envious.
anderson plugs front & rear 2 aug cables. can run air compressor, winch or 3000watt converter. still need to setup jumper cables.
 
Do you mean using the cables as a wiring harness?
sorry for the confusion

just didn't sound right calling 2 gauge "wire", kinda like we dont say "battery wires".

Screenshot_20260609_092616_Amazon Shopping.webp
 
anderson plugs front & rear 2 aug cables. can run air compressor, winch or 3000watt converter. still need to setup jumper cables.


Allow me to apologize in advance. Did you mean "inverter" because a converter reduces a higher voltage to lower. Then, RV converters do even more.

If inverter, and if 3000W output, it's going to want a far larger copper stranded cross section that has 2AWG. If the inverter were right next to the battery bank *maybe* you could get away with 2/0 but over the length of the truck (figure 25' run, then we double that distance for the round trip in order to calculate for % amperage drop) the result should be 4/0 which weighs roughly 1 lb per foot. All this assuming a 12V system you're dealing with.

If you may wire a battery bank to produce 24V, then of course your cable run can use a smaller wire gauge than 4/0 for the 25' run.

Again, forgive me for being "that guy" and one who even after all this may be mistaken, but I have been down this road to learn how to build mobile off grid solar power (battery power) for myself and today I have a solid, reliable, near-bulletproof system operating in my little "squaredrop" trailer.
 
Back
Top Bottom