Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
What finish is that? It looks “brushed” in that photo, but on the truck it looks different. I like!(I don't even know what threads I'm replying to... only responding to bell notifications lmao)
Me again.
THEY'RE HEEEEEEERE! (waited two weeks!)
And here's one of them:
View attachment 263633
I'll be 'round back unwrapping the other four.
What finish is that? It looks “brushed” in that photo, but on the truck it looks different. I like!
I lay down a piece of cardboard to put my 5gal bucket on. when done I paint dots on it to use as a target next time i go out shooting.Changed the engine oil/filter, Shell T6 5W-40. Winter will be in full swing (or over) by the time I need to change it again.
You would think a 65 year old man could do this job without spilling a drop. I've been changing PowerStroke 6.7l since 2011, so it's not a lack of experience. I buy every gadget that claims to make an oil change cleaner, neater, or faster. Fumoto valve certainly doesn't make it faster, even with oil at normal op temp.
Most of my problem is a breeze blowing a slow drip away from the drip pan or taking off the filter. I tried the gallon ziplock bag around the filter last time, meh. Today I used a metal drip pan, supported by a milk crate. The oil on my hands is what dripped on the driveway. Maybe I should try the gallon bag again with the elevated pan. One day I'll get it figured out.
Please don't! Butt if you do, put it on after KTP.View attachment 264473
It’s totally going on the passenger side window.
I did the same thing, but I added a 38mm socket with a scotch guard wrapping to make it not wobble in the Jack buddy. Also, be sure to measure and calculate the total height to make sure the jack will fit under the axle, should the tire be completely flat. This was a problem with my configuration and why I purchased the scissor jack. It may have just been the 12-ton jack height, but your jack looks similar.Picked up a F-450 Jack and a Bottle Jack Buddy. Just in time for the KTP road trip!
The large Jack Buddy will fit the 11.6 axle with a teensy tiny bit of file work. There is a very small gap at the bottom of the axle tube. It is likely that it’s just the heavy powder coat on it. We shall see.
View attachment 264458View attachment 264459
BRB….I did the same thing, but I added a 38mm socket with a scotch guard wrapping to make it not wobble in the Jack buddy. Also, be sure to measure and calculate the total height to make sure the jack will fit under the axle, should the tire be completely flat. This was a problem with my configuration and why I purchased the scissor jack. It may have just been the 12-ton jack height, but your jack looks similar.
View attachment 264481
I have relegated my 12T jack to the garage as well; I carried that jack around for a couple years before I read a post about the height of the axle with a flat tire. (July group buy) I do have a 3.5T hydraulic floor jack, but this one is easier to position and not interfere as much to get a jack stand next to it when the truck is in the air. I do still occasionally work on my own vehicles. Shock time coming up pretty soon...Womp womp womp…….
My maths didn’t math right. Will need to take the angle grinder to the ears, or leave it for shop use. Bummer.
Me thinks I measured the bottom of the loaded tire. It would probably be fine with 20” wheels.
Oh well. At least the jack itself fit under there.
The jack itself will work well. It does lift a flat to a height height enough to put a fully inflated spare on. So it will go in the truck. Even the BJB won’t work for a flat, the jack is better than the POS factory Jack.I have relegated my 12T jack to the garage as well; I carried that jack around for a couple years before I read a post about the height of the axle with a flat tire. (July group buy) I do have a 3.5T hydraulic floor jack, but this one is easier to position and not interfere as much to get a jack stand next to it when the truck is in the air. I do still occasionally work on my own vehicles. Shock time coming up pretty soon...You never know when a second jack might come in handy.