Forscan for 2022

[rsaltz]

Still cant get the Splash screen to change. Notices the "SS" next to the selections is that something that needs to be changed in the 3rd block?

 

[MrMallerd]

I've tried Firefox & Internet Explorer & link will not open.

 

[MWheeler]

has anyone been able to get the DEF screen to work. I got it to load, but it stays at 0% and does not increase.

thanks

 

[Joe_Lee]

I'll be using this as well, awesome.

 

[gSwift]

has anyone been able to get the DEF screen to work. I got it to load, but it stays at 0% and does not increase.

thanks

I have the DEF screen on mine and sometimes it takes a couple of days to start showing a percentage after a regen.

 

[BroncOh]

DPF, not DEF

 

[gSwift]

DPF, not DEF

Thats what I meant.

 

[MWheeler]

Yeah, me too

 

[gSwift]

Yeah, me too

Technically it does show on the dash as "Diesel Exhaust Filter" so in a way we weren't wrong. lol Not sure why Ford didn't list it as Diesel Particulate Filter

 

[Smokinquack89]

New to the Forescan.... how does this affect factory warranty? Thanks!

 

[Modman]

@drivingforward are there benefits to changing something in the "As Built" section vs. the "Plain English" section other than the obvious ease of interpretation?

Ex: For adding temps on the gauges you have it listed as contained in the 720-07-01 string which I understand from looking at the F150 Sync4 spreadsheet. You also have it listed as a selection in the plain english section. Any reason I wouldn't go straight to the plain english and make the change there? I already connected and poked around a bit but have not made any changes yet... maybe tonight!

 

[texmudder]

The "Plain English" for many of the changes are not clearly stated in the program as to what they do or what it even means. The temps on gauges is also listed in the 2020-21 spreadsheet and worked fine on my 22.

 

[DieselDawg88]

Tag

 

[rsaltz]

Has anyone had success in changing the tire size to 37's following the process outlined on the Forscan website? I tried and it would not re-learn the modules after the mm change without generating a DTC code and CEL. put it back to OEM and it all normal...pulling my hair out... the calculation for 37's used was 2951mm the OEM was 2779.

 

[TwoFer]

Hey everyone thanks in advance for
the help. In forscan right now and can’t find “high beams with fogs” anywhere under BCM plain English. Am I missing something?

 

[TwoFer]

Hey everyone thanks in advance for
the help. In forscan right now and can’t find “high beams with fogs” anywhere under BCM plain English. Am I missing something?

Never mind I found it…..under “using front fog with high beam” for 2022 models

 

[Big_Ed]

Anyone close to Louisville have forscan? I don't own a laptop. I don't have any issue paying you for your time and equipment since I'm going to have to buy a cheap laptop in addition to the program license if I do it myself.

 

[22F250]

has anyone been able to get the DEF screen to work. I got it to load, but it stays at 0% and does not increase.

thanks

I have the DEF screen on mine and sometimes it takes a couple of days to start showing a percentage after a regen.

I'm at 0% every time I look and I have never seen the regen notification on my screen. I've smelled what I think is a region while driving?

 

[gSwift]

I'm at 0% every time I look and I have never seen the regen notification on my screen. I've smelled what I think is a region while driving?

Mine will stay at 0% for a few days and then start going up, but yeah, i've never seen any type of notification or dash light when its doing a regen.

 

[22F250]

Mine will stay at 0% for a few days and then start going up, but yeah, i've never seen any type of notification or dash light when its doing a regen.

I checked again and it jumped to 30% so I guess as someone said, don’t worry just drive it