Forscan for 2022

Nick1236 said:
Can you disable the seat belt chime and the stupid distracted driving warning message that pops up on the media screen Everytime to start the vehicle?
Click to expand...
Yes you can disable seat belt warnings on a per seat basis. I did for the front seats only but I don’t remember if this was a Forscan or a settings menu thing offhand.

i haven’t seen a way to turn off the distracted driver warning - this sync 4 has so many more layers and I don’t want to brick it guessing at some of them since chips are in short supply.
 
1sellerc said:
I was able to do the TPMS adjustment and to disable the double honk. What exactly is "bambi mode" listed under? Also, is there any way to set the mirrors to powerfold when you lock the truck?
Click to expand...
You can donitnduring basic setup. I don't have forscan but did set my mirrors to auto close
 
Has anyone tried the kicker mod without adding the kicker sub? Supposedly makes the stock B&O sound a lot better. I found codes to switch from and to, but the 'before' codes are different on the '22. So wondering if anyone has had any luck yet.

Thread here talking about the forscan mod: https://www.facebook.com/groups/fordtremor/permalink/908160996497267/

1629323315530.webp


My before in the Forscan test version ('22 Tremor):
1629323382417.webp


I haven't tried anything yet, figured I'd ask around first.
 
banthos said:
Has anyone tried the kicker mod without adding the kicker sub? Supposedly makes the stock B&O sound a lot better. I found codes to switch from and to, but the 'before' codes are different on the '22. So wondering if anyone has had any luck yet.

Thread here talking about the forscan mod: https://www.facebook.com/groups/fordtremor/permalink/908160996497267/

View attachment 30919

My before in the Forscan test version ('22 Tremor):
View attachment 30920

I haven't tried anything yet, figured I'd ask around first.
Click to expand...
For those of us who don't have a Facebook account, what is the kicker mod?
 
ccw said:
For those of us who don't have a Facebook account, what is the kicker mod?
Click to expand...
I don’t know a ton about it. It’s more documented on f150 forums from what I hear. Sounds like you enable some Forscan settings in the ACM module, which unlocks factory stereo throttling.
 
drivingforward said:
Ok guys I took the risk and did some testing. I was able to have a test build of Forscan compiled and tested all of the items on this spreadsheet I'm linking. I pulled some the data for formatting from this forums' 2020 Forscan sheet that was compiled by another member. All the other codes and Sync 4 data I pulled from other sources and hex editing and a little bit of SWAG'ing.

The short version - if it's in dark blue on the spreadsheet, I manually tested it on my 2022 by changing alphanumeric values in the tables. The rest are able to be modified by changing the plain english menu choices in the files OTHER than "AS BUILT" and worked on my particular vehicle.

Here's the sheet I made as I tested and the Forscan I used to do so. Use at your own risk, your mileage might vary, etc. I took the risk and it worked out for me - but should you decide to use this information you do so at your own risk - I hope it helps out the group!

Files To Download Below:

Download Spreadsheet Values Here

Test Forscan for 22 MY - It will probably warn it's not a recognized file with antivirus etc., I got this directly from the developer. Not sure how long this link will work, so I'd grab it asap.

If this ends up being helpful, MODS please consider pinning.

Thanks and good luck all!
DrivingForward
Click to expand...
Can you tell me where the Bambi mode selection is located? I looked through the BCM section and couldn’t find it.
 
Looking for someone in SoCal that can change the TPMS low warning limit. I'm in the San Diego area if you are capable of doing this let me know I'll buy you a 12 pack or something. Appreciate it very much.
 
1sellerc said:
Can you tell me where the Bambi mode selection is located? I looked through the BCM section and couldn’t find it.
Click to expand...
Yup it’s on the spreadsheet under BdyCm-BCM - it’s one you can change with plain English menu selection in Forscan, you don’t have to enter a code. Go to the BdyCm module (not as built) and you’ll see a number of options. Find the one that you want (high beams with fogs) and click the disabled part (or double click I don’t recall which) and then select enabled instead of disabled from the menu of choices, then wrote the change. Ez mode.
 
rsaltz said:
Is there a downloadable spread sheet and is FORScan good to go for 2022's yet? I tried to download the sheet on the first thread and it says unavailable.
Click to expand...
I just tried it to make sure and it opened online fine for me, from there you could download it. The Forscan test build I got from them to test with is also linked. If links aren’t working let me know, it could be your browser possibly.
 
Sub'd... Good thread! I will eventually need this for my heated steering wheel add on project at the very least
 
Has anyone been able to get the approach detection to work? I turned on everything that I could find associated with AD and it never seemed to work.

Any one done the tire size change?
 
Anybody have any luck with changing the splash screen using the plain English version? also I disabled the warning chimes for the pop up windows. Hopefully it didnt screw anything else up in the process.
 
Last edited:
You must log in or register to reply here.

Tremor Forum Fav 👍

Odyssey Battery ODP-AGM65 Extreme Series AGM Batterye Odyssey Battery ODP-AGM65 Performance Series AGM Battery - Grab one through Amazon!

Tremor Forum Photos

Latest Discussions

Back
Top Bottom