Forscan for 2022

I changed it in the 02-01 which is for the 2020 03-01 is for a 2022 I looked up my factory as built settings and changed it back but no dice?
 
@MTmudrunner maybe I missed that, so your truck is a 2020?
 
Got it! I'll look through the sheet again... I thought there were climate functions in 02-01 as well so make sure both 02-01 and 03-01 are back to the original As-Built and I will see what I can find out.
 
Modman said:
Got it! I'll look through the sheet again... I thought there were climate functions in 02-01 as well so make sure both 02-01 and 03-01 are back to the original As-Built and I will see what I can find out.
Click to expand...
Thanks a million for the help I'm sure you have better things to do this morning.
 
MTmudrunner said:
@Modman whats the best way to reset everything and start from square 1?
Click to expand...
Upfront disclaimer that I have never done this, but you can download the .ab file from motorcraft.com and us it to overwrite any of the modules. Here is a summary:

Setting truck back to stock - Forscan - Ford F150 Forum - Community of Ford Truck Fans

2015 - 2020 Ford F150 - Setting truck back to stock - Forscan - My dad wants to sell his 2019 F150 and buy an F350. His friend changed a bunch of crap through Forscan and he wants it all back to stock, but didnt save any of the modules. How can he reset it all back to factory?
www.f150forum.com
 
No problem! I have been helped a ton on this forum and the least I can do is return the favor!!
 
I find the horn blowing when I exit my truck and it’s running to be a huge annoyance.I keep my keys in my pocket so I don’t lose them. I’m in and out all the time opening and closing gates. I get the impression that the horn can be turned off with forscan. How do I do that or where can I get it done?
 
Doc C said:
I find the horn blowing when I exit my truck and it’s running to be a huge annoyance.I keep my keys in my pocket so I don’t lose them. I’m in and out all the time opening and closing gates. I get the impression that the horn can be turned off with forscan. How do I do that or where can I get it done?
Click to expand...
See my post further back in this thread but here is that specific one. Can be done in plain English.

ModuleSettingOriginalNew
BdyCM – Plain EnglishDouble Honk on Leaving CabineEnabledDisabled
 
MiTremor906 said:
See my post further back in this thread but here is that specific one. Can be done in plain English.

ModuleSettingOriginalNew
BdyCM – Plain EnglishDouble Honk on Leaving CabineEnabledDisabled
Click to expand...
Thanks! I knew there had to be a way. When I had it in for service I asked if anything could be done but the tech said it was a safety feature that couldn’t be disabled. I figured it could be.
 
Modman said:
(y)
Click to expand...
Good afternoon. Modman, Just to recap what I did on my 22 Lariat Tremor over the weekend. I did not snap any pictures as I making the changed, but I wrote them down on to a note book for my record as change are being made in case I need to go back. Everything work out as you states. Thanks again for all your advices and help.
20211218_150538.webp
 
drivingforward said:
Ok guys I took the risk and did some testing. I was able to have a test build of Forscan compiled and tested all of the items on this spreadsheet I'm linking. I pulled some the data for formatting from this forums' 2020 Forscan sheet that was compiled by another member. All the other codes and Sync 4 data I pulled from other sources and hex editing and a little bit of SWAG'ing.

The short version - if it's in dark blue on the spreadsheet, I manually tested it on my 2022 by changing alphanumeric values in the tables. The rest are able to be modified by changing the plain english menu choices in the files OTHER than "AS BUILT" and worked on my particular vehicle.

Here's the sheet I made as I tested and the Forscan I used to do so. Use at your own risk, your mileage might vary, etc. I took the risk and it worked out for me - but should you decide to use this information you do so at your own risk - I hope it helps out the group!

Files To Download Below:

Download Spreadsheet Values Here

Test Forscan for 22 MY - It will probably warn it's not a recognized file with antivirus etc., I got this directly from the developer. Not sure how long this link will work, so I'd grab it asap.

If this ends up being helpful, MODS please consider pinning.

Thanks and good luck all!
DrivingForward
Click to expand...
Watching for sure
 
drivingforward said:
Ok guys I took the risk and did some testing. I was able to have a test build of Forscan compiled and tested all of the items on this spreadsheet I'm linking. I pulled some the data for formatting from this forums' 2020 Forscan sheet that was compiled by another member. All the other codes and Sync 4 data I pulled from other sources and hex editing and a little bit of SWAG'ing.

The short version - if it's in dark blue on the spreadsheet, I manually tested it on my 2022 by changing alphanumeric values in the tables. The rest are able to be modified by changing the plain english menu choices in the files OTHER than "AS BUILT" and worked on my particular vehicle.

Here's the sheet I made as I tested and the Forscan I used to do so. Use at your own risk, your mileage might vary, etc. I took the risk and it worked out for me - but should you decide to use this information you do so at your own risk - I hope it helps out the group!

Files To Download Below:

Download Spreadsheet Values Here

Test Forscan for 22 MY - It will probably warn it's not a recognized file with antivirus etc., I got this directly from the developer. Not sure how long this link will work, so I'd grab it asap.

If this ends up being helpful, MODS please consider pinning.

Thanks and good luck all!
DrivingForward
Click to expand...
I know I don't have a Tremor, but I do have a 22 F-350. Please don't kick me out of here :)

Looking at this spreadsheet. I have a couple of questions.

With Global Close did you get it to work successfully? When I programmed it, I only get the driver side window to go up.

The adds average speed to trip/fuel. Where are you seeing this?

The engine and transmission temp above the gauges. Can you provide a screen shot? I am not getting this to work, and want to make sure what I am looking for.

Where is the DPF% on screen showing up?

Thanks,
 
hroberts65616 said:
I know I don't have a Tremor, but I do have a 22 F-350. Please don't kick me out of here :)

Looking at this spreadsheet. I have a couple of questions.

With Global Close did you get it to work successfully? When I programmed it, I only get the driver side window to go up.

The adds average speed to trip/fuel. Where are you seeing this?

The engine and transmission temp above the gauges. Can you provide a screen shot? I am not getting this to work, and want to make sure what I am looking for.

Where is the DPF% on screen showing up?

Thanks,
Click to expand...
I have not done the first two, but @MiTremor906 has done the avg speed so he can probably help here.

The temps above gauges has to be done in the As-Built module. It won't work in plain English.

I have a gas engine, but iirc, the def% shows up with trans temp. In the cluster screen under engine info. Here is one discussion on the topic, I'm sure there are others and someone with a diesel can provide first hand knowledge:

www.fordtremor.com

Question DEF

I searched everywhere online and I havent ever driven a 6.7, but does Ford 6.7s have a actual DEF gauge like the Dodges?
www.fordtremor.com www.fordtremor.com
 
Last edited:
You must log in or register to reply here.

Tremor Forum Fav 👍

Piaa 97055 22-Inch (550mm) Si-Tech Silicone Wiper Blade - Grab one through Amazon!

Tremor Forum Photos

Latest Discussions

Back
Top Bottom