AlphaRex 2023+ Ford Super Duty F-250/F-350/F-450 Headlights

I have no idea. That’s just what the video said.
Guessing they just want key on power?
I will add the video to my watchlist, get a better understanding of what they are doing.
Maybe I can assist with the harness. It shouldn't be difficult to make it plug & play.

Edit: Even the written instructions don't mention what the fused wire is for. I believe it is just the DRL harness from continued reading.
 
Last edited:
Guessing they just want key on power?
I will add the video to my watchlist, get a better understanding of what they are doing.
Maybe I can assist with the harness. It shouldn't be difficult to make it plug & play.
Yeah it’s a bit of a mess TBH. I just need help with closing the fuse box. Any suggestions?
 
Yeah it’s a bit of a mess TBH. I just need help with closing the fuse box. Any suggestions?
Only suggestion I can make is leave it where it is routed now, (I am guessing that pic is your truck?) Trim the lip from the lid to clear it.
I would suggest adding heatshrink to the wire to protect it where it passes thru, but the connections are already made, Put 2-3 wraps of tape on it to help reduce wear on the wire.
 
Only suggestion I can make is leave it where it is routed now, (I am guessing that pic is your truck?) Trim the lip from the lid to clear it.
I would suggest adding heatshrink to the wire to protect it where it passes thru, but the connections are already made, Put 2-3 wraps of tape on it to help reduce wear on the wire.
Honestly that was my next step unless someone had a better idea. Thanks man.
 
Update: The fuse tap was too tall for my panel cover. I had to pivot and wire it to the brn/wht wire on the upfitter harness (strt/run) and it works the same. Too bad I already notched my cover. Anyway, if you get this kit, make sure the cover closes with the tap in place before you commit. Would have taken me significantly less time overall. Anyway, I’ll share pics tonight.
 
Update: The fuse tap was too tall for my panel cover. I had to pivot and wire it to the brn/wht wire on the upfitter harness (strt/run) and it works the same. Too bad I already notched my cover. Anyway, if you get this kit, make sure the cover closes with the tap in place before you commit. Would have taken me significantly less time overall. Anyway, I’ll share pics tonight.
Thank you very much
 
I have no idea. That’s just what the video said.
I ran into this issue before. And all I did was notch the lid to fit the wire and ensured there was no rubbing. Then I packed the area with dielectric grease. When I say notch I got a drill bit and pressed it against the under side of the lid. No drilling holes. And it worked fine.
 

Attachments

  • IMG_5503.webp
    IMG_5503.webp
    122.8 KB · Views: 44
Looks awesome my friend!
 
Looks great. Have you had any issues with hyper flash or is everything working as designed?
 
Additionally, seeing the issue @TheBlackPearl was having, I'm contemplating just having a shop do it for me.
 
Got the lights installed. Look great but seem to be getting some hyper flashing. 😐
 

Attachments

  • 20260809_103851.webp
    20260809_103851.webp
    296.4 KB · Views: 34
  • 20260809_110835.webp
    20260809_110835.webp
    346 KB · Views: 32
  • 844d1f37-7466-44ba-a085-ee3acda79ad2.webp
    844d1f37-7466-44ba-a085-ee3acda79ad2.webp
    177.8 KB · Views: 36
  • 20260810_201648.mp4
    2.6 MB
  • 20260810_202132.webp
    20260810_202132.webp
    240.3 KB · Views: 37
  • 20260810_203303.mp4
    5.9 MB
Have Forscan? Might need to change the turn signals to LED in your BCM.
I do have forscan, but haven't played with it. It was not just the turn signals, but also the low beam bulbs. Would your suggestion cover that as well?
 
I do have forscan, but haven't played with it. It was not just the turn signals, but also the low beam bulbs. Would your suggestion cover that as well?
Are all of your plugs connected along with the additional battery connections?
 
I do have forscan, but haven't played with it. It was not just the turn signals, but also the low beam bulbs. Would your suggestion cover that as well?
I don't know about the headlights, I would have to find the latest forscan sheet or hook up to the truck and see if there is a LED option for headlights. I know there is a setting for signals.
 
Back
Top Bottom