2023+ ForScan Spreadsheet
- OP 🔹 ZooDad
- Start date
Hi @Chris-DTA on my 2023 in the settings under alarm I have the option to disable the motion sensors. No need forscan for this one, at least for me.
- OP 🔹
- #64
@Cux211
I am not aware of a plain English list.
But using the first two columns you can determine the name of the change and the module it is located in.
Don’t forget to download your factory AsBuilt from ford and backup your modules BEFORE any changes. Saving a profile (shouldn’t anyway) or configuration is not making a backup.
ZooDad
I am not aware of a plain English list.
But using the first two columns you can determine the name of the change and the module it is located in.
Don’t forget to download your factory AsBuilt from ford and backup your modules BEFORE any changes. Saving a profile (shouldn’t anyway) or configuration is not making a backup.
ZooDad
- Jun 25, 2020
- 6,370
- 10,730
- >>US Army<<
- Is she DAF or just ignoring me??
- 2022 F350 CCLB (11/2022)
- 2015 F350 CCLB 225k // 2006 F350 CCLB 280k
The Plain English menus can be quite large for the options one can select.
What's not known is what each function does or the full effect of the changes. That's the $45.00 question.
There's one that lists something like Fuel Pump Run On Door Open. So does that change make my 6.7L fuel pump run when I open the door?? Is that a better functional aspect compared to Key ON functioning?? Sounds nice to use when priming the 6.7L fuel system, but is it even a function that will operate in the 6.7L PCM?? Maybe it's only to be used in a gasser motor?? We would think that the menus are only for our specific truck, but I believe it's just the full list of options Ford uses across all model vehicles.
What's not known is what each function does or the full effect of the changes. That's the $45.00 question.
There's one that lists something like Fuel Pump Run On Door Open. So does that change make my 6.7L fuel pump run when I open the door?? Is that a better functional aspect compared to Key ON functioning?? Sounds nice to use when priming the 6.7L fuel system, but is it even a function that will operate in the 6.7L PCM?? Maybe it's only to be used in a gasser motor?? We would think that the menus are only for our specific truck, but I believe it's just the full list of options Ford uses across all model vehicles.
Trying to update my tank size with Forscan on my 2024 F350 Tremor. Updated tank size has no effect on DTE. The associated videos for this mod says to also change Fuel Level Source to IPC, but when you do so, the DTE says zero "0". Anyone had any success with updating the DTE?
Thanks
Thanks
- Jun 25, 2020
- 6,370
- 10,730
- >>US Army<<
- Is she DAF or just ignoring me??
- 2022 F350 CCLB (11/2022)
- 2015 F350 CCLB 225k // 2006 F350 CCLB 280k
I've not changed those parameters myself, but there should be some good answers soon. I thought there was something in the 2023+ spreadsheet, strange this isn't noted unless it's under the Plain English menus. I'm in the P-Cola area so if you need anything just hit me up.
FYI- There’s a procedure in the manual to remove seat belt chimes - very easy - just a matter of clicking and un clicking the seatbelts with in a certain time line. Every Ford truck I’ve owned Ive removed this annoying chime on the first day. If you can’t find it I can up load a snap shot of the procedureCannot get the IPC module to take the write command to disable the damn seatbelt chimeit stops the service procedure and reverts back to the original as-built!!! Any suggestions?
Sorry to bother. Do you know how to turn off the a/c recirculation timer?
I have the most trouble with it during the winter, it turns off after 300 seconds once desired temp is reached. I would love to turn that function off and keep recirculation on all the time so I do not have to smell the vehicles around me.
Last edited:
- OP 🔹
- #70
DTE value is hard coded in the PCM firmware. No changes can be made at this time. Still working on it.
DTE value is hard coded in the PCM firmware. No changes can be made at this time. Still working on it.
Yes that removes the chimes, but not the red warning box that pops up.FYI- There’s a procedure in the manual to remove seat belt chimes - very easy - just a matter of clicking and un clicking the seatbelts with in a certain time line. Every Ford truck I’ve owned Ive removed this annoying chime on the first day. If you can’t find it I can up load a snap shot of the procedure
Let me look into it.
What is your value at (HVAC) 733-08-01
ZooDad
I appreciate you looking into it. . I’ll report back mañana.
- Jun 25, 2020
- 6,370
- 10,730
- >>US Army<<
- Is she DAF or just ignoring me??
- 2022 F350 CCLB (11/2022)
- 2015 F350 CCLB 225k // 2006 F350 CCLB 280k
Is this a thing for the 2020-2022 trucks as well?? That could be a nice change to make for all of us.
- OP 🔹
- #73
Just my luck. My license ran out two weeks ago and noticed on forscan.org there are new sanctions against Russia. I’m unable to get a new subscription right now. I tried to follow the Facebook link but I do not have a Facebook. so I cannot find the guy that is helping facilitate payments PayPal info
- OP 🔹
- #75
Watching now i can get to fiddling lol
You were correct! It has been a little bit since I had to get a new license, it finally came back to me.
Back on topic
This is what populated in my HVAC module
Unfortunately my truck defaults back to motion sensors on after the truck is started again. I was hoping that setting them to off and turning off the ask me on exit part would default them off, but it doesn't. If someone finds a place to change the motion sensor to default off it would be great.
This post (and following posts) worked for my '22 model year, so it may still work for '23 and up. Plain English mode made it easy; no changing of hex values necessary. Worth a shot. Report back.
False Alarm...Alarm.
Strong side winds has set mine off a couple of times. Did you install the perimiter plus system? With only the factory security system, since there is no shock sensor, I would think the wind would have to actually lift the truck to set the alarm off lol. Mine has never gone off from an outside...
www.fordtremor.com
Last edited:
