2023+ ForScan Spreadsheet

ZooDad

Tremor Fiend
Joined
Jun 26, 2023
Messages
236
Reaction Points
380
Location
East Tennessee
First Responder
35 years LEO - Retired
Current Ride #1
2020 F450 Lariat Ultimate

2023+ Super Duty ForScan Spreadsheet

**Things that are not working as of 01-26-2024**
DTE Changes
Auto Shutdown disable

**Notes**
My Screen not returning to last screen is resolved in SSM 51679
Factory (owners manual) method of disabling Seat Belts is resolved in SSM 51679

Ok everyone here is the beginning of the 23+ ForScan Spreadsheet.
I have tried to add all the changes we have done in the other thread. There are more to be added.
I don't have hands on a MY23+, so if someone your like to test things for support shoot me a PM or email if you have it.

ZooDad
 

2023+ Super Duty ForScan Spreadsheet

**Things that are not working as of 01-26-2024**
DTE Changes
Auto Shutdown disable

**Notes**
My Screen not returning to last screen is resolved in SSM 51679
Factory (owners manual) method of disabling Seat Belts is resolved in SSM 51679

Ok everyone here is the beginning of the 23+ ForScan Spreadsheet.
I have tried to add all the changes we have done in the other thread. There are more to be added.
I don't have hands on a MY23+, so if someone your like to test things for support shoot me a PM or email if you have it.

ZooDad


Do you have more information on SSM 51679 mentioned above?

All i can find was that it talks about missing a compass from the cluster, and the compass can be added back via Forscan, however i did not see that option in your spreadsheet.

 
Yeah my DTE adjustment isn’t working for me as well. Got the 58 gallon gas tank, it now says “0” for my DTE after trying to adjust. The factory gallons settings showed 0 in the modules to begin with instead of 38 so I figured something was different for 2023 from the onset.
 
Yeah my DTE adjustment isn’t working for me as well. Got the 58 gallon gas tank, it now says “0” for my DTE after trying to adjust. The factory gallons settings showed 0 in the modules to begin with instead of 38 so I figured something was different for 2023 from the onset.
Yep. Still working on it.
For now change it back to factory and change the gallon/litre value in PCM plain English only.
I have a couple of people testing but for now it’s better than nothing.

ZooDad
 
@ZooDad
I can’t get the heated steering wheel to pop up on the climate bar
I have heated/cooled seats enabled and it works perfectly
Is there another value I need to add?
 
@ZooDad
I can’t get the heated steering wheel to pop up on the climate bar
I have heated/cooled seats enabled and it works perfectly
Is there another value I need to add?
Sorry I have figured this out…original value was 2 and I changed it to 5 and it worked…
So it was add 3 to the value instead of 4 for me
 
@ZooDad
I can’t get the heated steering wheel to pop up on the climate bar
I have heated/cooled seats enabled and it works perfectly
Is there another value I need to add?
i tried these. was able to get climate controls on the screen, but not seats or steering wheel.
what values did you use for the seats?

i also noticed when i added the controls to the screen, all the other controls (audio, car play, settings, etc...) disappeared. did the same happen on your truck?
 
i tried these. was able to get climate controls on the screen, but not seats or steering wheel.
what values did you use for the seats?

i also noticed when i added the controls to the screen, all the other controls (audio, car play, settings, etc...) disappeared. did the same happen on your truck?
IMG_1961.webp

This is what my main screen looks like after all the climate bad upgrades.
 
yours is the same. all the other functions are replaced by the climate functions
 
View attachment 144431
This is what my main screen looks like after all the climate bad upgrades.
Just curious, is there added benefit to putting this on the screen, or is it a convenience thing? It almost seems like a whole new layout? Do you lose the quick buttons normally at the bottom?
 
Yep. Still working on it.
For now change it back to factory and change the gallon/litre value in PCM plain English only.
I have a couple of people testing but for now it’s better than nothing.

ZooDad
Any updates on this issue ?
 
Yep. Still working on it.
For now change it back to factory and change the gallon/litre value in PCM plain English only.
I have a couple of people testing but for now it’s better than nothing.

ZooDad
On my 2023 F250, in the PCM plain english module, there is no gallon/litre values or tank size settings that can be changed, why would I not have that when others can change it in PCM?
 
Has anybody found a way yet to turn on the mirror cameras with the turn signal? I know they come on with a trailer attached and I have seen it can also work with a dummy plug for a trailer. But I would like to be able to have them enabled by default in forscan if possible.
 
Cannot get the IPC module to take the write command to disable the damn seatbelt chime 🤬 it stops the service procedure and reverts back to the original as-built!!! Any suggestions?
 
Cannot get the IPC module to take the write command to disable the damn seatbelt chime 🤬 it stops the service procedure and reverts back to the original as-built!!! Any suggestions?
@Cglenn
What MY ?
What adapter ?
What version of ForScan?

ZooDad
 
I am brand new to ForScan. I went in and changed my tire size on my 2023 F250 Tremor. Now the Service 4x4 warning is popping up and the check engine light is on as well. Any ideas how to fix that?
 
I am brand new to ForScan. I went in and changed my tire size on my 2023 F250 Tremor. Now the Service 4x4 warning is popping up and the check engine light is on as well. Any ideas how to fix that?
How did you make the change ?
What value did you use ?

Tire Size

ZooDad
 
How did you make the change ?
What value did you use ?

Tire Size

ZooDad
I changed the tire size in mm, to 2827. This was based off of 569 revolutions per mile, converted, etc. Speedo is now correct, damn near perfect. I reset the TCM and got the 4x4 warning to go away. Unfortunately the PCM relearn does not work. I get the following message: tire circumference: parameter in central configuration is out of range for this module. Any ideas on how to get around this?
 
Last edited:
Unfortunately your number is way too high.
Most trucks can only go to 2770.
I would start there.
You need to Relearn not reset the following modules
PCM (Diesel & Gas)
TCM (Diesel)
AWD (Diesel & Gas)

Once you get no wrench try moving up. (Some earlier trucks could take 2800 but I have not seen that for a couple MY now.

After you are done you will have a “Freeze Frame” P0160A DTC that will not clear. It is a historical code and will clear with drive cycles. Unknown how many though. You should have no wrench nor CEL.

ZooDad
 
Hi ZooDad,
Following your guidance on changing the pcm plain English for DTE/fuel size in another post/thread/forum on 6/20/24 did not affect my DTE on the dash. I went from 48 to 68 gallon tank and with a full tank it was the same as before I set it. Let me know where the best place (besides the spreadsheet) would be to monitor the progress on this.

Thanks,
 
Back
Top Bottom