🛠️ What did you do to your Tremor today? [2026 edition]

It’s the Ready Lift 2.5” then I sourced tremor blocks and ford OEM u-bolts. Truck sits 1” taller in the rear. I like the look of level truck, but I didn't want to take the chance of rear being dead level or even 1 mm lower than the front.
 

Attachments

  • IMG_3177.webp
    IMG_3177.webp
    86.1 KB · Views: 15
It’s the Ready Lift 2.5” then I sourced tremor blocks and ford OEM u-bolts. Truck sits 1” taller in the rear. I like the look of level truck, but I didn't want to take the chance of rear being dead level or even 1 mm lower than the front.
I gotcha, looks great, I've been thinking about doing a tremor rear block for the height, or a 4" rear block and pull the bottom overload, or a PMF deaver pack. Mine is pretty much dead level and when I see it looking dead level I don't like it.
 
5-tire 5000-mile tire rotation today. 2nd time. First was at 4790 mi, after having my fifth oem Duratrac fitted to a fifth Tremor aluminum road wheel I had just purchased.

View attachment 253511



The rotation is known as a "rearward cross" where the front/steer tires are crossed to opposite corners at the rear, and where the rear tires go directly forward to serve as steers.

With a 5-tire deal, the spare becomes the right rear, and the left front goes on vacation on the spare winch to literally hang out for 5000 miles before it goes onto the right rear...

View attachment 253512

I figured if I slid the spare from under the truck using cardboard it'd be an easier deal. THEN I remembered my old mechanics' creeper from 40 years ago... boy, howdy! does THAT make this job easier (I won't have this luxury if ever having to use my spare out there in the rest of the world but it's nice to have, here at home for tire rotation maintenance).

Also, what's nice about a 5-tire rotation is that only one corner of the truck needs to be lifted at a time.

View attachment 253513

I used my HF Badland Mini 1.5-ton. Truck weighs 7100 lbs. Divided by four, that's an average corner weight of 1775 lbs. A 1.5-ton jack lifts 3000 lbs.



View attachment 253514

View attachment 253515
I figured if I slid the spare from under the truck using cardboard it'd be an easier deal. THEN I remembered my old mechanics' creeper from 40 years ago..
Great idea. I use a large furniture dolly to achieve the same result. Work smarter not harder, right? With wheel tire combos around 100lbs, gotta find as many ways to save my back to do tire rotations.
 
Blend Mount and Dongar Compact USB-C plug installed.
Ford Blendmount.webp
 
PPF day. I did full-frontal (I'm assuming Optimus will approve)
Yes sir, I approve this message! Looks awesome 👊.
 
Back
Top Bottom