🛠️ What did you do to your Tremor today? [2026 edition]

Installed Bilstein 5100 shocks and steering stabilizer on my 21. While doing the stabilizer I realized I’ve got some play in both joints of the OEM drag link and likely the track bar. I imagine these are causing the clunking I’ve been dealing with. Any recommendations on an upgrade? (Stock tremor otherwise, so no need for anything crazy that I won’t see the benefit of)

View attachment 241771View attachment 241772
Did the same to my '25.
 

Attachments

  • Messenger_creation_3A51CF0E-42C6-4A6D-8429-63E1504869CA.webp
    Messenger_creation_3A51CF0E-42C6-4A6D-8429-63E1504869CA.webp
    105.3 KB · Views: 57
I have had them on all my overlanding vehicles and have never had a problem, although Id be lying if it was not in the back of my mind. :)
 
Man, the more I see of those Black Rhinos, the more I want to go that route...I just worry about snow and mud clearing with the lack of "powerwasher" holes. Haha
I have had the wheels for about 60k miles. As far as im concerned, if you cant see it - its not there :p
 
I have had the wheels for about 60k miles. As far as im concerned, if you cant see it - its not there :p
That's the mindset I've been leaning towards too; but give I may be away from a washbay for a few weeks at a time, I wonder if it's the safe mindset. Alternately, I may go Arsenal in a different size rim to keep the smaller offset//poke that I want, but that's way down the road now, given I had to deal with a deer suicide and the upgrades it brought on. Haha
 
Great pic!

Which offset is that? I see these -44mm and that's way too much. I prefer the -18mm or 6mm.
-44 is not enough with how tall your truck is. -25 ten wide at a minimum, if your being conservative. 😎
 
-44 is not enough with how tall your truck is. -25 ten wide at a minimum, if your being conservative. 😎
Correct, I meant not enough as it's too much into the wheel well. -18mm is probably best but not sure yet.

My options for the 8x170 are 6mm or -18mm:

1000029708.webp


 
Awesome, thank you!


And what's your offset, Mr!? I'm pulling the trigger on these soon and would like to compare offsets.
I’m running the 17” wheels in -18 offset
Here’s a few shots of my different setups/ stances for you.
White truck picture is 35x12.5r20 Ridge grap with 20x10 fuel wheels and -18mm off set
The pics with the Falken RT are 37x13.5r17 with on the black rhino
The falken at4w are 37x12.5r17 on the same wheels
IMG_7054.webp


IMG_7056.webp


IMG_7057.webp


IMG_5222.webp

IMG_3429.webp
 
I’m running the 17” wheels in -18 offset
Here’s a few shots of my different setups/ stances for you.
White truck picture is 35x12.5r20 Ridge grap with 20x10 fuel wheels and -18mm off set
The pics with the Falken RT are 37x13.5r17 with on the black rhino
The falken at4w are 37x12.5r17 on the same wheels
View attachment 241944

View attachment 241945

View attachment 241946

View attachment 241947
View attachment 241948
Awesome thank you! Looks really good. Any pics of the actual rim and how the depth is into the wheel? Truck looks tough!
 
Swapped out sport grill for an ebay BAP/Platinum style. Fit and finish is not bad at all, very pleased for 250 bucks.

Will have to figure out the light situation..but i like it a lot.


1000000977.webp


1000000979.webp
 
Last edited:
Back
Top Bottom