🛠️ What did you do to your Tremor today? [2026 edition]

i haven't done anything yet. just making sure i get notifications.
 
Installed seat covers from vertex off-road. 2024 xlt tremor. Very impressed with the quality and fit. Also lowered and swapped the running boards.
 
Pulled the front driver's and passengers seats, added sound deadening to complete my ocd of the cab. No, I'm not pulling the center console, too much plastic to deal with.... maybe in time 🤪

Two new acid batteries from Ford (2nd replacement, replaced both right at a year ago). Last time under warranty, next replacement will be better quality. Any recommendations for preventing corrosion on the batteries holders and terminals? Dealership sprayed a purple protector on them but they are already showing signs of corrosion. Ugh.

Installed Builtrite dash mount. Waiting on tackform accessories to go with it.
Might just be better to bite the bullet and put in AGMs.

Oddly enough, I've never had an issue with corrosion on a battery. I usually put a healthy amount of that grease for the posts they sell at the checkout and call it a day. Wonder if it's mostly because I lived in a really low humidity place, but now need to keep a closer eye on it with the greater humidity we get in DFW.

Can't imagine the other common causes are issues:
  • Overcharging: Excessive charging generates heat and gas, accelerating electrolyte evaporation and corrosion, often more noticeable on the positive terminal.
  • Undercharging: Frequent short drives or a weak alternator can lead to undercharging, causing sulfate buildup primarily on the negative terminal.
  • Overfilling the battery: Adding too much water (in non-sealed batteries) can cause acid to overflow during charging, leading to corrosion.
  • Poor connections or environmental factors: Loose terminals increase resistance and heat, promoting corrosion, while humidity or road salt can exacerbate the reaction with copper clamps.
 
Starting off the new year slow with some organization dividers for the black hole and some hammerlock links.
 

Attachments

  • IMG_8025.webp
    IMG_8025.webp
    229 KB · Views: 133
  • IMG_8026.webp
    IMG_8026.webp
    265.9 KB · Views: 127
  • IMG_8028.webp
    IMG_8028.webp
    202.6 KB · Views: 125
  • IMG_8027.webp
    IMG_8027.webp
    375.7 KB · Views: 128
Starting off the new year slow with some organization dividers for the black hole and some hammerlock links.
How much for the XL wipes? 🤪
 
I was busy looking for the hammock links, wondering if it was some sort of neat storage bag in the black hole…need to get off the night shift so I can sleep. 😂
 
I was busy looking for the hammock links, wondering if it was some sort of neat storage bag in the black hole…need to get off the night shift so I can sleep. 😂
Bahahahaha those night shifts can definitely mess with ya.
 
How much for the XL wipes? 🤪

You want to keep your servos clean, nothing beats the Duke Cannon Cold Shower wipes. Strong and aggressive like you like it.

 
You want to keep your servos clean, nothing beats the Duke Cannon Cold Shower wipes. Strong and aggressive like you like it.

Good to know. 😂
 
Here for the 2026 games. 🤣🤣

🇺🇲 🇺🇲 🇺🇲 🇺🇲 🇺🇲 🇺🇲 🇺🇲 🇺🇲 🇺🇲 🇺🇲 🇺🇲 🇺🇲
 
Jut got a 2026 F-250 Platinum Tremor. First thing will be throwing some new wheels and tires, and also a retrax pro bed cover. Will post pics when its done.
 
How did the install go? Mine is still in its box, I need to install it.
It was much easier than I thought it was going to be. I had my dad help me with it and we knocked it out in just under 4 hours. I imagine it would've taken me a bit longer had I not had someone helping me.

The Rough Country instructions kind of suck, but as you're taking the bumper apart and looking at the parts, it kind of just makes sense where things are supposed to go.

I also found this video to be helpful for the part that braces the winch plate to the crossmember.

 
It was much easier than I thought it was going to be. I had my dad help me with it and we knocked it out in just under 4 hours. I imagine it would've taken me a bit longer had I not had someone helping me.

The Rough Country instructions kind of suck, but as you're taking the bumper apart and looking at the parts, it kind of just makes sense where things are supposed to go.

I also found this video to be helpful for the part that braces the winch plate to the crossmember.

Did you use the rough country hidden winch brace as well, or did you not need it for installation?
 
It was much easier than I thought it was going to be. I had my dad help me with it and we knocked it out in just under 4 hours. I imagine it would've taken me a bit longer had I not had someone helping me.

The Rough Country instructions kind of suck, but as you're taking the bumper apart and looking at the parts, it kind of just makes sense where things are supposed to go.

I also found this video to be helpful for the part that braces the winch plate to the crossmember.

Kinda suck? They're horrible!
 
Did you use the rough country hidden winch brace as well, or did you not need it for installation?
Yes, I used all the parts included in the kit. It was just a little confusing as to the orientation, but the video helped with that.
 
Yes, I used all the parts included in the kit. It was just a little confusing as to the orientation, but the video helped with that.
I looked on their website but it said it would not fit my 26, but I did not think there were changes between the 25 and 26.
 
Back
Top Bottom