🛠️ What did you do to your Tremor today? [2026 edition]

Got my MXT575 installed with a BPD dual NMO antenna mount, Midland Ghost 3db antenna, BuiltRight rear seat storage to mount the radio, and some elbow grease to get everything installed cleanly.

Mic jack is a snap in square plastic port between wireless phone charger and factory USB ports in front center console pocket. Looking "factory" was my goal. Radio is powered via AUX1.

Bit of a bleatch running everything the way I wanted, but I'm impressed with how easy this truck was to work on. Getting through the firewall pissed me right off till I found some factory cab entries and now I feel silly 🙃 😅.

Oh yeah! BR driver seat release also went in. Found out my driver rear seatlatch will only close with the lower seat up or it doesnt make enough contact to close completely. NBD really just... ugh, thanks Ford. Note: latching issues 100% unrelated to BR latch release kit. BPD dual nmo/BR rear seat storage combo worked out super slick.
You may potentially be able to reclaim your AUX1 if it's needed; I've been told by Midland's CS that the MXT575 remembers it's power state, so you can use the mic power button to turn it on and off - the unit won't turn on if you turn it off and unplug the mic, even with repeated start/stops of the engine. I was looking at doing something very similar to what you just did, but also pulling the USB-C from the front of the radio forward as well (into the non-wireless charging cubby to get more space, hopefully with the remote head of my VHF radio). Midland's front USB is always powered, regardless of radio on or off, alledgedly.

Anyone with these radios happen to be able to confirm that for me? (Maybe us?).

Thanks!
 
You may potentially be able to reclaim your AUX1 if it's needed; I've been told by Midland's CS that the MXT575 remembers it's power state, so you can use the mic power button to turn it on and off - the unit won't turn on if you turn it off and unplug the mic, even with repeated start/stops of the engine. I was looking at doing something very similar to what you just did, but also pulling the USB-C from the front of the radio forward as well (into the non-wireless charging cubby to get more space, hopefully with the remote head of my VHF radio). Midland's front USB is always powered, regardless of radio on or off, alledgedly.

Anyone with these radios happen to be able to confirm that for me? (Maybe us?).

Thanks!
I debated running constant vs switched but this is currently my only aux switched accessory, and I love flipping that switch instead of hitting the mic( for dramatic Top Gun effect 🤣).

^It does retain power state, so i can flip my aux 1 and its live. Also, USB-C port does have constant power regardless of power state.
 
Nicely done!
Thank you for the pictures.
For the snap in mic port, is that an RJ45? Which one did you use? Link?


Credit to DIYnation for the link. I found in his links for his install. It works well, be patient with your cut.

There is plenty of room, center console is easy to remove and disassemble, i was able to route that whip from the rj45 port to the back off CC to meet my mic extension cable running under carpet. Cable is routed and fastened inside CC so you can still easily remove it as a whole unit.

Ive been testing around town to some known repeaters ive used a lot. The Ghost antenna/BPD Dual NMO combo is performing great in the city. No SWR test but I can tell its pretty good from a little testing with whoever runs the two big repeaters I use around here.
 
Drove to California so Ron could help me take off my Fox ATS stabilizer. But seriously I’ve heard of them breaking the bolt but this is a little better. Broke the bracket, all this just driving down the freeway not off-roading.
IMG_1217.webp
IMG_1218.webp
 
Drove to California so Ron could help me take off my Fox ATS stabilizer. But seriously I’ve heard of them breaking the bolt but this is a little better. Broke the bracket, all this just driving down the freeway not off-roading.View attachment 246550View attachment 246551
Sorry to hear about this earlier in the day, brother. I'm just glad you got there safely and he was able to help.

Time for the dual stabilizer! Enjoy the rest of your stay and hope you return home safely.
 
I looked at a drop bracket like this but the stabilizer wasn’t at an angle but fairly horizontal so didn’t go that route. And with stock suspension nobody was using a drop bracket.

 
Installed my bedrug and Builtright molle panels on the new truck. I hope to get some decent picture of the ARE camper shell and Foundation wheels this weekend. Can forget the Nerf dart antenna
 

Attachments

  • 20260211_170729.webp
    20260211_170729.webp
    108.8 KB · Views: 68
  • 20260211_194401.webp
    20260211_194401.webp
    417.6 KB · Views: 67
  • 20260211_194406.webp
    20260211_194406.webp
    381 KB · Views: 68
Installed my bedrug and Builtright molle panels on the new truck. I hope to get some decent picture of the ARE camper shell and Foundation wheels this weekend. Can forget the Nerf dart antenna
The Nerf dart antenna is the best part!
 
LOL, my buddy has the .50 cal antenna had to be different. Surprisingly the reception is not bad
Very nice!

I got a M16 custom and the reception is great. Kills anything flying above too 😁.

1000024651.webp
1000024652.webp
 
Figured out I got scammed on some fake Centramatics so I swapped all four of them out while I was rotating tires today. The epoxy over the seam and lack of Centramatic stamp are the most noticable differences. Ordered direct from Centramatic on the second go around. The weights in the fake ones degraded and started clumping over about 5k miles which was causing a pretty significant wobble. Butter smooth with the new ones on.

Huge thank you to @OmahaBravo for the taillight hardware! Finally got that installed as well.

IMG_7957.webp


I'm blown away by the little Milwaukee M12 3/8 impact. Did almost the entire lift kit on my Bronco with it and have even been using it on lug nuts. I wouldn't have believed it if I hadn't seen it myself, so here's video evidence. Lugs were torqued to 160lb-ft last time the wheels were off. The high output 5ah battery definitely makes a power difference.

 
Figured out I got scammed on some fake Centramatics so I swapped all four of them out while I was rotating tires today. The epoxy over the seam and lack of Centramatic stamp are the most noticable differences. Ordered direct from Centramatic on the second go around. The weights in the fake ones degraded and started clumping over about 5k miles which was causing a pretty significant wobble. Butter smooth with the new ones on.

Huge thank you to @OmahaBravo for the taillight hardware! Finally got that installed as well.

View attachment 246694

I'm blown away by the little Milwaukee M12 3/8 impact. Did almost the entire lift kit on my Bronco with it and have even been using it on lug nuts. I wouldn't have believed it if I hadn't seen it myself, so here's video evidence. Lugs were torqued to 160lb-ft last time the wheels were off. The high output 5ah battery definitely makes a power difference.

Damn, he sent you some big ass washers! 🤪
 
Figured out I got scammed on some fake Centramatics so I swapped all four of them out while I was rotating tires today. The epoxy over the seam and lack of Centramatic stamp are the most noticable differences. Ordered direct from Centramatic on the second go around. The weights in the fake ones degraded and started clumping over about 5k miles which was causing a pretty significant wobble. Butter smooth with the new ones on.

Huge thank you to @OmahaBravo for the taillight hardware! Finally got that installed as well.

View attachment 246694

I'm blown away by the little Milwaukee M12 3/8 impact. Did almost the entire lift kit on my Bronco with it and have even been using it on lug nuts. I wouldn't have believed it if I hadn't seen it myself, so here's video evidence. Lugs were torqued to 160lb-ft last time the wheels were off. The high output 5ah battery definitely makes a power difference.


Which Centramatics are the ones for us? I’ve been debating between these and another brand, mainly as I heard this ones have a bit of a noise to them that I’m pretty sure might drive the wife insane if it exists…

Damn, he sent you some big ass washers! 🤪
It’s the next part of the All Guard kit. Just blocking the gap with these so no air shim is being slid in…
 
Back
Top Bottom