🛠️ What did you do to your Tremor today? [2026 edition]

Is it possible that middle bar is interfering with the sensor operation, looks like it might be covering the upper part of it?
I’ll need to doublecheck that once I pull the cover down; it shouldn’t. I suspect it’s tilted a hair to the driver’s side and is looking into the oncoming lane a bit. It’s not all the time, but just in heavy oncoming traffic.

But I was racing a snowstorm today, supposed to dump 10-12” of snow starting in 20-30 minutes, so I didn’t bother turning back (especially since today’s a holiday up here and they came in special to do the install). I’ll likely shift or shim it a bit and see if that solves it. And then maybe fire up ForScan and recalibrate for the added peace of mind.
 
How much stuff are you running to need all your upfitters plus 2x garmin powerswitches???
I mean, it’s not to out of the realm with all the crazy lights and gadgets available. Or if one wants to have a more refined button control - L/R instead of both, etc.

I’ve currently only got one left, and hope to eventually get an 8-button one to put lighting onto. So my onboard are reserved for non-lighting. 😂
 
How much stuff are you running to need all your upfitters plus 2x garmin powerswitches???
A lot. To run every single light or a pair independently i would need over 12 switches as is today And i’m adding another 3 lights. Every single light pod i own has backlighting. Lots to consider.
IMG_9549.webp
IMG_8484.webp
 
Removed every trim piece and panel from the dash chasing an annoying rattle from what sounds like the instrument panel area. Friction tape and foam everywhere that made sense. Better, but still not where I want it
 
I feel your pain on this, except mine barely caught the very top, and immediately spread down. I didn't even make my Truck's 1 year old birthday before the windshield cracked. Same experience, rock on the freeway and it was loud. I purchased a windshield warranty when buying the truck, 7 years of coverage for $799.

Dealer replacement for factory glass: $1671.21. They replaced it under warranty, with no issues.
Man, I wish I had gotten that insurance. I went with protective film after a break, also less than a year old. The film is ok, but hell on wiper blades, and every bit as expensive as the insurance.
 
I’ll need to doublecheck that once I pull the cover down; it shouldn’t. I suspect it’s tilted a hair to the driver’s side and is looking into the oncoming lane a bit. It’s not all the time, but just in heavy oncoming traffic.

But I was racing a snowstorm today, supposed to dump 10-12” of snow starting in 20-30 minutes, so I didn’t bother turning back (especially since today’s a holiday up here and they came in special to do the install). I’ll likely shift or shim it a bit and see if that solves it. And then maybe fire up ForScan and recalibrate for the added peace of mind.

I dunno if you ever saw my posts on this, but in a nutshell you want to get the truck on a perfect level ground and get the sensor lined up vertically and horizontally to 0 degrees. That’s how it comes from factory and once i got the angles matched up in a new location there was no need to recalibrate via software.

IMG_5107.webp
IMG_5123.webp
IMG_5140.webp
 
I dunno if you ever saw my posts on this, but in a nutshell you want to get the truck on a perfect level ground and get the sensor lined up vertically and horizontally to 0 degrees. That’s how it comes from factory and once i got the angles matched up in a new location there was no need to recalibrate via software.

View attachment 246273View attachment 246274View attachment 246275
Yeah, I was gonna follow your steps there if I did it myself, but since insurance is covering the install, I just let them. I saw alignment marks, and it was taken for a drive with no issues, but once I got into really heavy oncoming traffic is started spazzing out. Hoping it’ll be an easy adjustment, but gonna wait until this cold snap is over to mess with it. I’ll just do the hover foot or disable it for now if it gets really annoying.
 
With all the current and planned lighting mods, i finally ran out of up-fitters. I researched the market for quite a while, considering all the pros and cons, and settled on a garmin powerswitch. I have yet to see anyone install one on the forum, unless i missed it?

I will eventually run two of them, but will start with one, hooked up to blazeoffroad command center and billet battery tie down.

Testing the features of powerswitch, using the app, loving it.

View attachment 246255View attachment 246256
Will you be installing the Super Wings Supercharged Jett!? 🤪
 
Got the center console organizer today, very impressed with the modularity and ability to build it for what you want to store.
IMG_1203.webp
IMG_1204.webp
 
Noticed 2 of my 4 lasfit LED headlight bulbs have 1 side of LEDs out. Had these only 3.5 years.

What is the life expectancy of an LED headlight bulb?

I don’t know if I have it in me to tear the front end apart to replace them again. Seems easier to drive it off a cliff and collect the insurance money 😂
 
Think it as released last weekend.
False alarm Optimus and others - they currently are not accepting payments from double deuce card members for this product.

I ran over to the site to make payment as it’s been a minute since I’ve had an OTC box show up… will have to wait a little longer haha.

Great design as always. Keep it up.
 
Back
Top Bottom