🛠️ What did you do to your Tremor today? [2026 edition]

View attachment 245613
Yesterday... Thought I hit a bird.... 🤦😥



Edit: got the rock out.
How hard would it be to get inside this thing and get the plastic bit back so I can do some rigging with some super glue? I ain't about to buy a new mirror but don't want to leave the duct tape on there forever.
View attachment 245623
View attachment 245624
Lol, can't even see it 😎
You sure it wasn't a meteorite? Can't believe a rock could go through the plastic like that. Catapult practice??
 
Got my bumper install coming up soon, so prepped a pair of my upfitter harness ends for the fog pocket floods, and the frenched in light bar.

Figured I’d prep my KnuKoncepts battery terminals too, but then realized there’s probably not much point in installing them yet since I don’t have the accessories to attach to them yet.

Moved on to prepping my NOCO to mount and discovered I didn’t put it back in the truck after I sold my Challenger and took it off it’s batteries. :-(
 
View attachment 245613
Yesterday... Thought I hit a bird.... 🤦😥



Edit: got the rock out.
How hard would it be to get inside this thing and get the plastic bit back so I can do some rigging with some super glue? I ain't about to buy a new mirror but don't want to leave the duct tape on there forever.
View attachment 245623
View attachment 245624
Lol, can't even see it 😎
The Tremor God's gifted you a pet rock! Will you name it Rocky?

Hopefully you get that fixed, brother. Keep us posted.
 
View attachment 245613
Yesterday... Thought I hit a bird.... 🤦😥



Edit: got the rock out.
How hard would it be to get inside this thing and get the plastic bit back so I can do some rigging with some super glue? I ain't about to buy a new mirror but don't want to leave the duct tape on there forever.
View attachment 245623
View attachment 245624
Lol, can't even see it 😎
That sucks! I feel your pain. I caught a rock with my windshield today but it didn’t stick around for adoption … cracked both layers! Was loud, scared the crap out of me this morning.
IMG_4202.webp
IMG_4203.webp
 
I went to AK and back to TX with no window crack and last week riding east into Houston a rock bucket kicks up a rock and hit the window the same spot.
 
That sucks! I feel your pain. I caught a rock with my windshield today but it didn’t stick around for adoption … cracked both layers! Was loud, scared the crap out of me this morning.View attachment 245812View attachment 245813
If it makes you feel any better, I got one that size in almost the same spot 2 months after I rolled off the lot and it’s still there. She spidered sideways, right side went all but directly to the bottom of the windshield, and the left arm went along the bottom of the windshield, and then up the driver’s side to the roof line. Almost invisible out of my field of vision. Couldn’t have been a better split.

Coming up on two years now, and still waiting for it to get another reason to replace the damn thing. So expensive. :-(
 
Did the ranch hand delete mod.. Reinstalled an OEM front bumper with the newly released LM1 Light bar mount.. Need to Wire in the BD Squadrons tomorrow to the Upfitter switch..

IMG_9653.webp
IMG_9654.webp
IMG_9655.webp
 
That sucks! I feel your pain. I caught a rock with my windshield today but it didn’t stick around for adoption … cracked both layers! Was loud, scared the crap out of me this morning.View attachment 245812


I feel your pain on this, except mine barely caught the very top, and immediately spread down. I didn't even make my Truck's 1 year old birthday before the windshield cracked. Same experience, rock on the freeway and it was loud. I purchased a windshield warranty when buying the truck, 7 years of coverage for $799.

Dealer replacement for factory glass: $1671.21. They replaced it under warranty, with no issues.
 

Attachments

  • Crack is Whack.webp
    Crack is Whack.webp
    104.7 KB · Views: 28
  • Windshield Replacement Cost.webp
    Windshield Replacement Cost.webp
    108.9 KB · Views: 28
I was able to get my dual iDash units and Pedal Monster installed. The Pedal Monster makes a huge difference. Throttle response is night and day. I can already see my fuel mileage taking a hit because it is just too fun to drive now.

For anyone with a Platinum Plus interior, the Banks A-pillar mount will not work. The trim is different and it just does not fit correctly. I ended up using the Banks Dual Pod Suction Cup Mount and paired it with the 23+ Edge CTS3 vent mount. Both use a 17mm ball, so they fit together perfectly. I was able to reuse the suction cup in my wife's SUV, pairing it with a 17mm iphone mount from Tachform.

It is not a permanent solution, but it is clean and solid for now until someone comes up with a better mounting option for this interior.
 

Attachments

  • Banks Final.webp
    Banks Final.webp
    106.8 KB · Views: 40
  • Banks Front View.webp
    Banks Front View.webp
    82.5 KB · Views: 50
  • Banks Wiring.webp
    Banks Wiring.webp
    121.1 KB · Views: 42
  • Banks Side View.webp
    Banks Side View.webp
    102.2 KB · Views: 43
Last edited:
I was able to get my dual iDash units and Pedal Monster installed. The Pedal Monster makes a huge difference. Throttle response is night and day. I can already see my fuel mileage taking a hit because it is just too fun to drive now.

For anyone with a Platinum Plus interior, the Banks A-pillar mount will not work. The trim is different and it just does not fit correctly. I ended up using the Banks Dual Pod Suction Cup Mount and paired it with the 23+ Edge CTS3 vent mount. Both use a 17mm ball, so they fit together perfectly. I was able to reuse the suction cup in my wife's SUV, pairing it with a 17mm iphone mount from Tachform.

It is not a permanent solution, but it is clean and solid for now until someone comes up with a better mounting option for this interior.
Looks good my friend! Glad you're enjoying the Pedal Monster. It's definitely fun to use. Now put it to Track +10 and really enjoy it! 😁
 
Looks good my friend! Glad you're enjoying the Pedal Monster. It's definitely fun to use. Now put it to Track +10 and really enjoy it! 😁
I may have eased into track mode and realized quickly that I need to maintain some self-control, and Track mode wasn't going to support me in that endeavor.

It was a 8,000-pound rocket ship in Track mode +10. 🤯
 
Converted my center console to a jump seat over the past few weeks. Sourced the jump seat (crew cab version in cloth), seat to floor brackets, and Katzkins leather seat covers (black with grey stiching) from Ebay. Sourced all the trim pieces new from Ford parts. I used the original harness to keep all of the electronics working. The key detecting module is temporarily relocated to under the carpet in front of the jump seat. I'm planning to extend the wires to relocate it to somewhere on the accessory panel (maybe the new tray). One of the USB connectors couldn't reach the front panel, so I'll need to extend these wires as well. The 110v outlet needs to be plugged in to the harness for the pro power onboard to work properly, so I just tucked away behind the cup holder. I probably cut out a square to put the outlet somewhere in the rear cup holder area. I also plan to get some aftermarket heated seat switches (single - pair) to keep the rear heated seats working. There's really no room for the double switch and make it look aesthetically pleasing. Not so sure what I'll do for the hole in the panel. I can get the cover for it from Ford or maybe just use it as a pass thru for wiring. So it's done and functional for now and capable for a 6 person road trip.

I got help from this post: https://www.fordtremor.com/threads/console-to-jump-seat-swap-project-reversible.5218/

And this youtube video:
 

Attachments

  • IMG_9343.webp
    IMG_9343.webp
    324.3 KB · Views: 35
  • IMG_9344.webp
    IMG_9344.webp
    368.6 KB · Views: 37
  • IMG_9345.webp
    IMG_9345.webp
    451.6 KB · Views: 36
  • IMG_9346.webp
    IMG_9346.webp
    406.4 KB · Views: 35
  • IMG_9347.webp
    IMG_9347.webp
    277.3 KB · Views: 37
  • IMG_9348.webp
    IMG_9348.webp
    332.3 KB · Views: 35
  • IMG_9349.webp
    IMG_9349.webp
    384 KB · Views: 35
  • IMG_9350.webp
    IMG_9350.webp
    283.5 KB · Views: 35
Back
Top Bottom