🛠️ What did you do to your Tremor today? [2026 edition]

Ordered this guy
Today the rig was upgraded with a hood solar panel from Lensun. It is a 98 Watt solar panel. I did not buy their entire kit, but rather bought a Victron MPPT controller and the protective vinyl I bought from a local tint/wrap shop. To protect the Victron from dirt and dust under the hood, I installed it behind the lower glove compartment, attached to the upper glove compartment. It fit perfectly into the spot and there even some sort of supportive lip/edge to support the mounting location. I used the passenger side rubber grommet in the floor to feed the wires to and from the engine bay. Wiring was upgraded to 12 AWG and a fuse is integrated near the battery as well. The vinyl is 3M 2080 and the solar panel is glued to the vinyl using VHB tape. I let it sit for a few hours with some weight on it to ensure proper bonding.

Fun little project. I actually ended up with two more of the solar panels, so if anyone is interested, please reach out. I will offer them for a very fair price. Will probably post them for sale to a wider audience in a few weeks.

View attachment 246780
View attachment 246781
View attachment 246782
View attachment 246783
View attachment 246784
View attachment 246785
I’m happy with mine. Second vehicle I have installed their panel. Good choice on the Victron.
 
Today the rig was upgraded with a hood solar panel from Lensun. It is a 98 Watt solar panel. I did not buy their entire kit, but rather bought a Victron MPPT controller and the protective vinyl I bought from a local tint/wrap shop. To protect the Victron from dirt and dust under the hood, I installed it behind the lower glove compartment, attached to the upper glove compartment. It fit perfectly into the spot and there even some sort of supportive lip/edge to support the mounting location. I used the passenger side rubber grommet in the floor to feed the wires to and from the engine bay. Wiring was upgraded to 12 AWG and a fuse is integrated near the battery as well. The vinyl is 3M 2080 and the solar panel is glued to the vinyl using VHB tape. I let it sit for a few hours with some weight on it to ensure proper bonding.

Fun little project. I actually ended up with two more of the solar panels, so if anyone is interested, please reach out. I will offer them for a very fair price. Will probably post them for sale to a wider audience in a few weeks.

View attachment 246780
View attachment 246781
View attachment 246782
View attachment 246783
View attachment 246784
View attachment 246785
did you change the cabin filter while you were in there ?
 
Today the rig was upgraded with a hood solar panel from Lensun. It is a 98 Watt solar panel. I did not buy their entire kit, but rather bought a Victron MPPT controller and the protective vinyl I bought from a local tint/wrap shop. To protect the Victron from dirt and dust under the hood, I installed it behind the lower glove compartment, attached to the upper glove compartment. It fit perfectly into the spot and there even some sort of supportive lip/edge to support the mounting location. I used the passenger side rubber grommet in the floor to feed the wires to and from the engine bay. Wiring was upgraded to 12 AWG and a fuse is integrated near the battery as well. The vinyl is 3M 2080 and the solar panel is glued to the vinyl using VHB tape. I let it sit for a few hours with some weight on it to ensure proper bonding.

Fun little project. I actually ended up with two more of the solar panels, so if anyone is interested, please reach out. I will offer them for a very fair price. Will probably post them for sale to a wider audience in a few weeks.

View attachment 246780
View attachment 246781
View attachment 246782
View attachment 246783
View attachment 246784
View attachment 246785
What are you using the solar panel for?
 
Historic blizzard. They predict up to two feet of snow in my county when it stops tomorrow.

Can our pano moonroof hold that much wet snow? If the answer is maybe, then i didn’t want to wait and find out🌞

IMG_2999.webp


IMG_1280.webp


 
What are you using the solar panel for?
Trickle charging the two truck batteries. Kind of like insurance when boondocking as an example, but I also think that it maintains the battery charge levels in a good way and hopefully extends the life of the batteries.
 
Drove down to Texas to pick up a buddy's 350Z and a VQ for the swap.

New Mexico crosswinds were so bad AdvanceTrac just turned itself off. Apparently it doesn't do NASCAR. Spent most of the state watching the inclinometer for entertainment.

Screenshot From 2026-02-23 12-36-08.webp


Once I hit Texas the roads are so straight cruise control is basically self-driving.
Screenshot From 2026-02-23 12-35-33.webp


Loaded up the Z on the trailer and threw the engine in the bed.
Screenshot From 2026-02-23 12-34-47.webp

Screenshot From 2026-02-23 12-34-41.webp


Got the swap done in 3 days, buddy drove it 12 hours home on day 4 and it's running better than before. Successful trip.


 
Trickle charging the two truck batteries. Kind of like insurance when boondocking as an example, but I also think that it maintains the battery charge levels in a good way and hopefully extends the life of the batteries.


I've a portable arrangement to do this sitting in my F150, but not yet in my F350 Tremor.

What are you using as a charge controller?

Cheers!
 
I rotated my tires in my driveway, on gravel. I figured why pay someone else to do work that I have to check over? I also didn't get grease on anything. 😆 I killed off my floor jack, so my son came over and helped, and bought me a new off-road jack, and a torque wrench that goes to 250 ft. Lbs. Now I just have to spin the rears a few times to true them up, since being on the front. This shit is hard on an old man. 😆
 
Trickle charging the two truck batteries. Kind of like insurance when boondocking as an example, but I also think that it maintains the battery charge levels in a good way and hopefully extends the life of the batteries.
Does the controller you have prevent overcharging?
 
Do the newer models of Tremor bitch about you keeping your hands on the wheel every 15 seconds?

I had to turn lane keep assist off as it was pissing me off. That and it would pull so hard right it would cross into the next lane. Then yell at me for being too far to the right before finally fixing itself.
 
Do the newer models of Tremor bitch about you keeping your hands on the wheel every 15 seconds?

I had to turn lane keep assist off as it was pissing me off. That and it would pull so hard right it would cross into the next lane. Then yell at me for being too far to the right before finally fixing itself.
I turned that shit off around 2+ years ago and never looked back. Fk lane keep assist, braking assist, and all the other crap that doesn't work right, gets in the way and generally does nothing but piss competent drivers off.
 
Do the newer models of Tremor bitch about you keeping your hands on the wheel every 15 seconds?

I had to turn lane keep assist off as it was pissing me off. That and it would pull so hard right it would cross into the next lane. Then yell at me for being too far to the right before finally fixing itself.
Yep. I’ll use is on highway driving occasionally. Never on secondary roads.
 
Does the controller you have prevent overcharging?
Short answer to that is yes. You set the Victron MPPT controller for battery type and it cycles through bulk, absorbtion and float modes based on battery level. It is essentially like plugging in a battery maintainer and walking away from the truck for an extended period of time.

It is also bluetooth monitorable so you can keep an eye on it if you wish.

Unlike the recent poster, I elected to just mount mine under the hood and it has survived without issue for 5 or so years at this point. I have been happy with any Victron product I have purchased. Good stuff IMO.
 
Back
Top Bottom