🛠️ What did you do to your Tremor today? [2026 edition]

Almost 3 years of practice on this truck. Lol pressure washer, leaf blower, and powered polisher cut down a lot of time. Worst part is the clay bar. I haven't found a shortcut for that one, not that I'd really want to rush that part.
Have you ever tried a clay towel? Supposed to be faster than a clay bar.

 
I installed BD fog lights today, can’t wait until it gets dark to test them out.
IMG_7301.webp
IMG_7302.webp
 
I finally installed the Carli pintop level kit with Kings and +3000lb Deaver leafs. Only thing left is the trophy hitch. The ride is unbelievable, this is how they should come from the factory!
 

Attachments

  • IMG_8282.webp
    IMG_8282.webp
    335.1 KB · Views: 55
  • IMG_8278.webp
    IMG_8278.webp
    378.2 KB · Views: 50
  • IMG_7844.webp
    IMG_7844.webp
    281.9 KB · Views: 52
  • IMG_7834.webp
    IMG_7834.webp
    231 KB · Views: 57
  • IMG_7828.webp
    IMG_7828.webp
    396.8 KB · Views: 54
  • 097C6E87-FC57-49BA-9FF6-1A8E2D36ECB8.webp
    097C6E87-FC57-49BA-9FF6-1A8E2D36ECB8.webp
    258.2 KB · Views: 54
I attempted to find the menu for Cruise Control / Adaptive Cruise Control and could not find it.

Anyone else have this issue?
 
Not a fan of the wheels that came on my truck but trying to ride out till need new tires to replace them. While I was rotating tires this weekend, I took some black acrylic paint markers and filled in the machined parts of the wheels to make them look a little better till I can get some new wheels.
 

Attachments

  • IMG_2801.webp
    IMG_2801.webp
    489.2 KB · Views: 47
  • IMG_2791.webp
    IMG_2791.webp
    427.2 KB · Views: 45
  • IMG_2788.webp
    IMG_2788.webp
    442.7 KB · Views: 46
  • IMG_2782.webp
    IMG_2782.webp
    322.3 KB · Views: 66
Went to @Battle Born Offroad to test fit a Fox bypass shock. Damn bracket won't allow for exact fitment. Welding will need to happen and it'll be $5k total so I bypassed on this mod. Oh well, it did look sick though...

24770.webp
24771.webp
24783.webp


There was a Tremor from Idaho getting some pusher action!

24769.webp

24768.webp
 
Installed s&b 60 gallon tank before upcoming trip to northern Utah. Great product about 4 hours In drive way with help of buddy.
Any hitches? Tip or tricks?

I'm ordering one soon to install before a trip through Colorado and up to Wy.?
 
Any hitches? Tip or tricks?

I'm ordering one soon to install before a trip through Colorado and up to Wy.?
A second set of hands helps for sure. For me one bolt broke that was a pain the ass and had to be finagled out. Jack stands or a small floor Jack could be helpful. Some of the connectors are a pain because of space especially at the top of tank. So tilted to one side front side down to reach in to disconnect the hoses and connectors was easier. Obviously sockets and extensions and impact helps keep the knuckle busting to a minimum. Not necessarily hard just space constraints make it a little more difficult. Getting filllers lines loose and reconnected was the biggest pain with trying to hold and get them where they need to go.
 
Been looking at a lot of diff pics, haven't you? 💁‍♂️
Probably not.. he's been too busy sticking his PPE into a lot of rear ends.
 
Back
Top Bottom