🛠️ What did you do to your Tremor today? [2026 edition]

That right there is a great point! but remember too that a malfunctioning valvebody, no matter the digital tune/shift map, can cause overly long shift *time* which is one way to fry a clutchpack. Fluid doesn't have to be hot for that to happen, but the fluid will be much hotter as a result!

/trouble


(I gotta get that new valvebody installed! wtf I have it on the shelf. No real issues yet w/ my 10R140. The vb install is a proactive move)
Exactly ,in my opinion also with cool transmission fluid and internal parts damaged .I think that would come into issue in Northern states , Canada, cold climate regions much much more than south Florida
 
Exactly ,in my opinion also with cool transmission fluid and internal parts damaged .I think that would come into issue in Northern states , Canada, cold climate regions much much more than south Florida
Hey ,I do believe I am one or one of very few that swapped a Dana 60 front axle assembly into my 2025 f350. My new goal is to make a mishimoto or similar transmission cooler fit since nobody makes a direct air to transmission fluid cooler to fit 23 and newer super duty trucks. They sell a kit for 2020-2022 10 speed super duty trucks but not newer.
 
That right there is a great point! but remember too that a malfunctioning valvebody, no matter the digital tune/shift map, can cause overly long shift *time* which is one way to fry a clutchpack. Fluid doesn't have to be hot for that to happen, but the fluid will be much hotter as a result!

/trouble


(I gotta get that new valvebody installed! wtf I have it on the shelf. No real issues yet w/ my 10R140. The vb install is a proactive move)
What valve body are you going with
 
NextGen Project Carbon w/ Pulse Delete because I'm a Nate fanboy. :ROFLMAO: (y)


I want to get it in there before 15,000 miles - waiting for the right shop and stretching out the miles a tad from a 10,000 mile original timeline smh
 
What type of transmission fluid do you all use ?
Ford dealer says use LV motorcraft

Manual says use ULV motorcraft
 
Whatever the particklar transmission model calls for.

I use LV in my 6R80 behind a Coyote in an F150 and will use ULV in the Super Duty Tremor's 10R140 cuz that's what the spec is.
 
NextGen Project Carbon w/ Pulse Delete because I'm a Nate fanboy. :ROFLMAO: (y)


I want to get it in there before 15,000 miles - waiting for the right shop and stretching out the miles a tad from a 10,000 mile original timeline smh
I have the next gen kit in both
Our 22 seem to work well
 
Old trans parts
 

Attachments

  • IMG_9873.webp
    IMG_9873.webp
    57.3 KB · Views: 29
  • IMG_8968.webp
    IMG_8968.webp
    132 KB · Views: 27
  • IMG_8742.webp
    IMG_8742.webp
    84.8 KB · Views: 27
  • IMG_8741.webp
    IMG_8741.webp
    137 KB · Views: 31
Any one had good results with the ppe trans temp bypass ??
Only thing I noticed on my 2025 is down here in land of extreme heat / Florida. Transmission fluid takes longer to warm up with this ppe item,however does not change high temperature of fluid after warm up. Hauling heavy etc.
I hate to put a product down but I feel wasted money. And yes I did change hose clamps with new oem after photo was taken
View attachment 266634
Huge difference for my truck. We blew right past 250F towing from Ash Fork to Williams, AZ, which slowed me right down. Think I saw 258 before it started coming back down a few minutes later. Not sure, but i think the stock bypass failed to engage. Around 25k miles. I replaced the trans filter, fluid and installed the bypass ASAP. Fluid looked ok, but better safe than sorry IMHO. Haven't seen over 220 since. The bypass needs a signal, so I left the stock bypass zip tied out of the way with the sensor plugged in and that works fine.
 
Huge difference for my truck. We blew right past 250F towing from Ash Fork to Williams, AZ, which slowed me right down. Think I saw 258 before it started coming back down a few minutes later. Not sure, but i think the stock bypass failed to engage. Around 25k miles. I replaced the trans filter, fluid and installed the bypass ASAP. Fluid looked ok, but better safe than sorry IMHO. Haven't seen over 220 since. The bypass needs a signal, so I left the stock bypass zip tied out of the way with the sensor plugged in and that works fine.
this is a month old ppe unit, it has sensor and wire plugs into it, not like the older ones.i had one like you are talking about on my 2022 f350
 
Is this a good brand for our trucks? I am guessing I would also have to buy and install the air compressor to inflate the bags right?

1787382230174.webp
 
Is this a good brand for our trucks? I am guessing I would also have to buy and install the air compressor to inflate the bags right?

View attachment 266789
I ran those for many years in the 2015 SD. Never had any problems, and I used them a lot.
One thing to think about is that those mount on the rear block tang. Not a big deal unless you have aftermarket blocks.
 
Is this a good brand for our trucks? I am guessing I would also have to buy and install the air compressor to inflate the bags right?

View attachment 266789
Had them on the last 2 dually’s and loved them combined with there compressor.
 
Is this a good brand for our trucks? I am guessing I would also have to buy and install the air compressor to inflate the bags right?

View attachment 266789
Have had these on both my 2022 and my previous 2012.

You dont need an onboard compressor for them. I run the schrader valves for them to the bottom holes on my license plate. Then you can fill them up with any air compressor.

Make sure you dont install them with a single valve and a T connecting the bags together. It's better to have them fill separate from each other for stability.
 
I had those bags on my Ram. I did use a “Wireless One” compressor and teed them together but I added a ball valve between the bags so I could isolate them once aired up (left open when aired down) I also had Daystar cradles. The downside is they do have internal bump stops that a very harsh. The lower models don’t have them and rely on 5 psi minimum in the bags for a bumpstop.
 
I've been neglecting Big Blue Betty so she got a 4 hr spa treatment today. Wash, clay bar, and wax. She looks so damn sexy when she's clean.
 

Attachments

  • 20260823_135011.webp
    20260823_135011.webp
    291.5 KB · Views: 32
Back
Top Bottom