Tire Pressure Question...

@Modman can also help you remotely if you're comfortable with another man in your software.
 
Get an laptop....plus you need the OBLynk cable or the wifi OBD-II dongle. This brand and the cable version is what PLENTY have used.


 
Gross. No pics thank you 🤪.
Video instead?

1781228398544.webp
 
ForScan has "Plain English" menus that are super easy to follow. I think I just typed in the value I wanted.

IMG_2605.webp
 
ForScan has "Plain English" menus that are super easy to follow. I think I just typed in the value I wanted.

View attachment 259366
Now that's what I would want...this HEX crap is for the birds. How do you get into the PLAIN ENGLISH menus? I downloaded Forscan and awaiting my activation code. My OBD Link EX will be here tomorrow. Don't want to screw this up so any good tutorials that I can watch to follow the correct processes?
 
Use google (Gemini) for instructions in Forscan but it’s very easy. I was super nervous with a brand new truck but took only a few minutes and I did 40 psi and Bambi mode in plain english. Warning — the TPMS will read - - after doing this. I panicked a little. A five minute drive had all the tires showing correct pressure with no warnings.

As others said if you take them back up to stock pressure and re lower them the light will go away as well, but likely will come back on during cool mornings so the ForScan is a much better solution.
 
WHOA....let's SLOW down there a bit. Before too long you are going to be HEX coding and going ALL KINDS of ForScan crazy. One step at a time....let's get the activation code and cable...THEN we fall down the rabbit hole. 'Kay?!? 🤣 🤣 🤣 🤣 🤣 🤣 🤣

:cool::cool:🇺🇲🇺🇲🇺🇲🇺🇲
 
WHOA....let's SLOW down there a bit. Before too long you are going to be HEX coding and going ALL KINDS of ForScan crazy. One step at a time....let's get the activation code and cable...THEN we fall down the rabbit hole. 'Kay?!? 🤣 🤣 🤣 🤣 🤣 🤣 🤣

:cool::cool:🇺🇲🇺🇲🇺🇲🇺🇲

I was going to remove the black box on the back up camera but backed out due to hexadecimal code. Lincoln mirrors would be cool…. The speedo seems like a PITA but i’ll definitely do it when I go to 37”s since I’m OCD.
 
@ramv : For me...the whole tire thing is a bit of study which I'm not into....best read that through several times before going at it. The others you mentioned are easy. Lincoln mirrors I never did, but easy.

Let's say this first : Backup ANY/ALL modules you will be modifying.....SAY IT 6X.....Don't proceed until you say it 6X.


Screenshot 2026-06-11 at 21.29.19.webp


Where you see the Red *....that is the location on the code that you change the value. Verify the other info applies to your truck (Sync version).
Says "Add 1 to current value"....so 0=1, 1=2, 5=6, etc etc etc
You make the changes. Save the changes, write to module....etc etc....Done.

This is a VEEERY short version on how to HEX change....this is not the actual process.

You might even find the above is done in the Plain English menus....just browse through them. IF you don't know if it applies, DO NOT change it. Move on in the menu. I found quite a few and considered them to not actually apply to the truck.

:cool: :cool: 🇺🇲 🇺🇲 🇺🇲 🇺🇲
 
WHOA....let's SLOW down there a bit. Before too long you are going to be HEX coding and going ALL KINDS of ForScan crazy. One step at a time....let's get the activation code and cable...THEN we fall down the rabbit hole. 'Kay?!? 🤣 🤣 🤣 🤣 🤣 🤣 🤣

:cool::cool:🇺🇲🇺🇲🇺🇲🇺🇲
Part should be here today. Still haven't received my Forscan email code yet. The only other thing I'd like to do is disable the seat belt graphic that pops up at start up. Where is that and what's it called. Don't care about the chime...just the graphic elimination. Thx

UPDATE: Forscan code received and activated!
 
Last edited:
Use google (Gemini) for instructions in Forscan but it’s very easy. I was super nervous with a brand new truck but took only a few minutes and I did 40 psi and Bambi mode in plain english. Warning — the TPMS will read - - after doing this. I panicked a little. A five minute drive had all the tires showing correct pressure with no warnings.

As others said if you take them back up to stock pressure and re lower them the light will go away as well, but likely will come back on during cool mornings so the ForScan is a much better solution.
Watched a YouTube video last night. Not the best but showed me what I need to do to do a module back-up and then make and save changes.
 
Watched a YouTube video last night. Not the best but showed me what I need to do to do a module back-up and then make and save changes.
Yes. this is very important to back up the stock settings.

Forscan is clunky at first, but you're a smart feller, you'll figure it out.
 
Back
Top Bottom