SUCCESS!!!! 37’s on factory rims, no lift, no rub….

Thanks guys, TRAMPER’s and my use case are very similar with a slide in camper in the bed, I just have a higher center of gravity with the hard side camper.
So his experience with these tires and what he has decided on is applicable for my situation.
I was running the duratracs at a probably higher than necessary pressure for the weight the truck is carrying, at around 58-60 front and 68 rear. With these 65psi max tires I’m thinking I will likely be running the rears near that, but am curious what pressures TRAMPER has had good results with.
 
@TRAMPER hey thanks again for the thread, I got these tires a couple days ago and am very happy with how they fit. No rubbing here either. I have them (in much smaller size)on my F150 as well.
Wondering what pressures you are running them at, since we both have a slide in camper. Mine is a little heavier but not by much.
I haven’t got around to doing the chalk test, just thinking your experience with these 65psi max tires would give me a good starting point
IMG_1482.webp

I would encourage you to use the chart on the company’s website as to the load rating at each PSI setting. I weighed my truck on a CAT scale to get the weight of each axle and divided that by two. That should tell you about what pressure each tire needs to be inflated to match the load the tire will see.
 
Last edited:
View attachment 205047
I would encourage you to use the chart on the companies website as to the load rating at each PSI setting. I weighed my truck on a CAT scale to get the weight of each axle and divided that by two. That should tell you about what pressure each tire needs to be inflated to match the load the tire will see.

Thanks yeah I looked that chart over before deciding on the tire, and my math says the tires are plenty adequate for my weight even when well below the max pressure.
Was just curious.
 
Thanks yeah I looked that chart over before deciding on the tire, and my math says the tires are plenty adequate for my weight even when well below the max pressure.
Was just curious.
Gotcha. I’ll hop into my truck when I get home from work tonight. I haven’t driven it since early December last year so I can’t recall the exact number I landed on. I’ll get back to you in a few hours. Now that the roads are salt free I need to get that thing rolling again!
 
Like @TRAMPER said, weigh your rig and reference tire load capacity chart. That is the only way to get correct air pressure for your specific rig. No need to guess based on other rigs because they can be deceptively different weights.

Get your front and rear axle weights on a CAT scale, fully loaded for camping with all your recovery gear, water, food, camping supplies, full tank of gas, anything you hang on the rear receive, and people in the rig. Do it empty, without camper, too, when you have it off because so many run way too much pressure when empty. If you tow, get weights of both axles with that full load. Then you have all those actual weights and you'll know exactly what pressure you should run with each load.

Scaling is the only way to know your front and rear axle weight. It only costs $14 to weigh. And I suggest downloading and setting up the CAT scale app beforehand, including payment method, and then you don't even need to use the intercom nor go inside and it stores your info. Just the passengers or amount of recovery gear can make hundreds of pounds different between two rigs that "are similar".

Figure out exactly what each axle (and then tire) is supporting. Then add in a few hundred pounds of leeway if you like. Use the chart for your specific tire size (that part is important because all tires sizes have different max loads at each pressure setting). Attached is the full chart so everyone can reference their tire size on all their vehicles outside of these specific 37" tires.
 

Attachments

Attachments

  • 20250506_105324.webp
    20250506_105324.webp
    260.1 KB · Views: 137
Last edited:
Has anyone tried 17x8.5 wheels?
 
Just had them put on! Love the look.
Tire pressure(cold 63° F):
Front 60 psi
Rear 50 psi
Adjusted FORSCAN TPM to 50 psi.
Super smooth and quiet love the new shoes!
View attachment 209754
I really do like the stock tremor wheels... I had Method M707 on my list of potential upgrades, but I'm not sure anymore. The chrome package is growing on me, and I've even been looking at the Method 318 clear coat lately...

Also curious, what do you do for a spare?
I noticed you only bought 4 tires, does the spare not fit a 37"? Or did you just delete?
 
Last edited:
Also curious, what do you do for a spare?
I noticed you only bought 4 tires, does the spare not fit a 37"? Or did you just delete?

 
I did see that after I posted, but still curious why they only bought 4...

I guess a more appropriate question for the group - who is running a full-sized spare and how often have you needed to use it?

I've always bought 5 wheels and 5 tires. Yes, more cost up front, but 5-way rotation buys me more life out of my set, and if I ever need a spare I know it'll be the same as the rest (though, I have never had a flat on E-rated true 3-ply sidewall tires)
 
I did see that after I posted, but still curious why they only bought 4...

I guess a more appropriate question for the group - who is running a full-sized spare and how often have you needed to use it?

I've always bought 5 wheels and 5 tires. Yes, more cost up front, but 5-way rotation buys me more life out of my set, and if I ever need a spare I know it'll be the same as the rest (though, I have never had a flat on E-rated true 3-ply sidewall tires)
@DTX2023Tremor and others have the Carli hitch…. That’s on my short list as well.
 
but still curious why they only bought 4...

Everyone has their own reasons.
My spare is a dedicated spare i don’t put it into rotation just yet, but i do have the 5th wheel and tire that does go into my 5 wheel rotation. Once the other 5 reach the tread of the 6th spare, it too will go into rotation. I’m dedicated to AT3s, so having 6 wheels is good for longevity. Plus, during winters i throw the 6th into the bed for added weight.
 
I know question not directed to me… but I considered the Carli hitch, and I’ll probably do it this year, but I lifted a 37in tire /wheel and it’s heavy! Now I’m on a 38in, and wonder would it matter if I had a spare if I can’t lift it on by myself lol
 
Good point on these bigger and heavier tire/wheel combos. Hard enough dealing with the extra weight in the shop on a day of your choosing. But add in heat, rain or cold, traffic, mud/dust/snow/ice, terrain, inconvenience and aggrevation, and suddenly every added pound feels moore like two pounds.

So, have to start pulling out some of the tricks from truckers and lift smarter not harder. Jack up axle to position hub/lugs only high enough so wheel needs minimal lift. And use tire iron or other lever to lift and position wheel onto lugs rather than picking it up, etc.
 
I know question not directed to me… but I considered the Carli hitch, and I’ll probably do it this year, but I lifted a 37in tire /wheel and it’s heavy! Now I’m on a 38in, and wonder would it matter if I had a spare if I can’t lift it on by myself lol
I hear ya. If one of my 40's blow, I'm fooked.
 
I was taking my 2nd Gen to the shop and had a brake pad collar slide out and rip out the valve stem. Swapping a 42” Swamper on beadlocks from a tall mount in the middle of town sucked
 
Back
Top Bottom