SUCCESS!!!! 37’s on factory rims, no lift, no rub….

If anyone wants a set of 3/8" bora spacers I have a set I'll let go for 1/2 what I paid. I bought them because I was originally going to run 37's on stock wheels but decided to get new wheels instead so they are brand new.
 
Did the previous owner who put in the front leveling spacer put in a swaybar relocation mount? It doesn't look like it.
Unclear. I asked the previous owner what leveling kit was installed, but he said the Ford dealership did it, and had no idea. I might try to contact that dealership to see if they have any history or part numbers... It did not rub with the 35"x12.5 Nitto Trail Grappler M/T tires that were on it, which is very odd to me, because the seemed wider.
 
If anyone wants a set of 3/8" bora spacers I have a set I'll let go for 1/2 what I paid. I bought them because I was originally going to run 37's on stock wheels but decided to get new wheels instead so they are brand new.
I might be interested in those, just fronts, right? Do these spacers require cutting the stock studs though? If so, I'm out.
 
I might be interested in those, just fronts, right? Do these spacers require cutting the stock studs though? If so, I'm out.
You can achieve the offset you want by purchasing wheels with that offset. Then you can have a set of wheels you love, keep an extra set for winter studs (or whatever), and not have to fuss with spacers at all.

Just my .02. I don’t see the appeal of spacers.
 
You can achieve the offset you want by purchasing wheels with that offset. Then you can have a set of wheels you love, keep an extra set for winter studs (or whatever), and not have to fuss with spacers at all.

Just my .02. I don’t see the appeal of spacers.

Some folks like myself only want to run oem wheels, even two sets of them. Those are the wheels i love, and not some aftermarkets. And if the tires don’t clear spacers is one way to gain clearance. 1/4 or 3/8 bora spacers is safe territory if done correctly.
 
Some folks like myself only want to run oem wheels, even two sets of them. Those are the wheels i love, and not some aftermarkets. And if the tires don’t clear spacers is one way to gain clearance. 1/4 or 3/8 bora spacers is safe territory if done correctly.
I’m surprised. I like the stock Tremor wheels, and I liked the wheels that came on my Raptor and our last super duty, but there’s never been a time when I couldn’t find a set of quality aftermarket wheels that fit the bill and looked good. (This time was the most challenging in forty years, because such a large proportion of the aftermarket wheels are all black, and I generally hate that look.) I generally keep my factory rims for winter/studded tires, but the seasonal change of look is nice too.

Maybe it’s a regional/cultural thing? With the exception of rare/specialty wheels, like those on the Raptor or GMC AEV “Salta” rims for example, OEM wheels aren’t very popular in the northwest. The tire outfits that offer trade credit pay little for them, and sets of the OEM wheels seem to be readily available for cheap.
 
I might be interested in those, just fronts, right? Do these spacers require cutting the stock studs though? If so, I'm out.
Another member has already PM'd me and I'm just waiting for payment, if he changes his mind I'll let you know.
These 3/8" don't require cutting the studs, they are hubcentric spacers that just sandwich between the Hub and your wheel, with such a small spacer you still have more than enough thread engagement. IMO if you needed more than a 3/8-1/2 inch spacer I would just go to aftermarket wheels. I purchased my set from custom offsets, around $180 for a pair.

Only reason I went aftermarket was by the time I paid for spacers, and the limited selection of tires that are manufactorer rated for an 8" Wide wheel (37" tire) it was only a couple hundred more for aftermarket. In the end actually cheaper as I just sold my stocks as I don't need a set of winter tires for my area.
 
I would love a solution to easily fix the rub on the RH front swarbar! I just got 37x12.5R18 Falken Wildpeaks on my stock 2023 with Tremor wheels and am experiencing this. The previous owner installed some kind of spacer level kit on the front...
Adjust the sway bar.
 
lol you aren’t wrong but that was 14 months ago…. Either way I’m happy to share!!!

These…

With much discussion here…
Just order a set for my new 2024 Lariat Ultimate, 7.3 Tremor in Iconic Silver with Black Appearance Package. I traded in my 2022 KR on Friday. Will get pics up soon.
 
2023 F350 6.7 HO Platinum

What has been the popular Tire Choice (rain/snow/off road/Highway) and Max size tire for stock?

Under 10k from replacing my tires and not ready to do the lift yet.
 
2023 F350 6.7 HO Platinum

What has been the popular Tire Choice (rain/snow/off road/Highway) and Max size tire for stock?

Under 10k from replacing my tires and not ready to do the lift yet.

I would suggest the set up listed in the original post in this thread. The Toyo Open Country AT3 is a much loved tire on these forums and for good reason; it should do everything you want it to. They seem to fit better than some others at the 37x12.5R18, again the focus of the thread. I thing they would also be great tires at the stock size for these Tremors should you choose to that path.
 
I would suggest the set up listed in the original post in this thread. The Toyo Open Country AT3 is a much loved tire on these forums and for good reason; it should do everything you want it to. They seem to fit better than some others at the 37x12.5R18, again the focus of the thread. I thing they would also be great tires at the stock size for these Tremors should you choose to that path.
Really appreciate that time and great response going to take a look at it all now.
 
I would suggest the set up listed in the original post in this thread. The Toyo Open Country AT3 is a much loved tire on these forums and for good reason; it should do everything you want it to. They seem to fit better than some others at the 37x12.5R18, again the focus of the thread. I thing they would also be great tires at the stock size for these Tremors should you choose to that path.
Does this look correct (switch current/new)
Current is stock 285
AISelect_20250215_174538_Chrome.webp
 
If you want true size info you have to go on tire manufacturers website and look up easy tire. Almost every tire and brand is a little different. It’s always around 0.5” +/- different from what a “true” tire size should be based on those tire size calculators
 
@TRAMPER hey thanks again for the thread, I got these tires a couple days ago and am very happy with how they fit. No rubbing here either. I have them (in much smaller size)on my F150 as well.
Wondering what pressures you are running them at, since we both have a slide in camper. Mine is a little heavier but not by much.
I haven’t got around to doing the chalk test, just thinking your experience with these 65psi max tires would give me a good starting point
 
@TRAMPER hey thanks again for the thread, I got these tires a couple days ago and am very happy with how they fit. No rubbing here either. I have them (in much smaller size)on my F150 as well.
Wondering what pressures you are running them at, since we both have a slide in camper. Mine is a little heavier but not by much.
I haven’t got around to doing the chalk test, just thinking your experience with these 65psi max tires would give me a good starting point
Ran this through Grok several days ago......

To determine the best tire pressure for a smoother ride in your 2023 Ford F-350 Tremor with stock tires, we need to consider a few factors. The "best" tire pressure depends on your driving conditions (loaded vs. unloaded), the specific stock tire size, and your preference for ride comfort versus handling or tire wear. Since you mentioned the current pressure feels "too much" and you want a smoother ride, I’ll assume you’re driving unloaded most of the time and looking to soften the stiff ride typical of a heavy-duty truck like the F-350 Tremor.

For the 2023 F-350 Tremor, the stock tires are typically LT285/75R18 Load Range E (10-ply) all-terrain tires, and the door jamb sticker usually recommends pressures around 60 psi front and 75-80 psi rear when cold. These values are set for maximum load capacity (up to the truck’s GVWR, often around 11,000-12,000 lbs depending on configuration), not necessarily for ride comfort when unloaded. Running these high pressures unloaded often results in a harsh, bouncy ride because the tires are overinflated for the lighter weight.

### General Guidance for a Smoother Ride
Lowering tire pressure slightly can soften the ride by allowing the tires to absorb more road imperfections, acting like a cushion. However, going too low can compromise handling, fuel economy, and tire wear, so it’s a balance. For an unloaded 2023 F-350 Tremor with stock tires, many owners and experts suggest dropping below the door sticker values when not towing or hauling heavy loads. Based on common practice for Super Duty trucks and the Tremor’s typical use case:

- **Front Tires**: Around 50-55 psi
- **Rear Tires**: Around 45-50 psi

These pressures assume a diesel engine (common in Tremors, adding front-end weight) and an unloaded truck. The front tires carry more weight due to the engine, so they typically need slightly higher pressure than the rear when empty.

### Why This Works
- **Unloaded Weight**: An empty F-350 Tremor might have an axle weight distribution of roughly 5,000-5,500 lbs front and 3,000-3,500 lbs rear. Load Range E tires like the stock LT285/75R18 can support over 3,500 lbs per tire at 80 psi, but at half that load, you don’t need max pressure. For example, at 50 psi, these tires can still handle around 2,800-3,000 lbs each—more than enough for an unloaded axle.
- **Ride Quality**: Lower pressure increases the tire’s contact patch and flexibility, reducing the "hop" or stiffness over bumps. Owners often report a noticeable improvement dropping from 80 psi to 50-60 psi in the rear when unloaded.

### Steps to Fine-Tune
1. **Check Your Door Sticker**: Confirm the exact recommended pressures (e.g., 60F/80R or 60F/75R) and tire size (likely LT285/75R18).
2. **Start Conservative**: Try 55 psi front and 50 psi rear (cold, measured in the morning before driving).
3. **Test Drive**: Assess the ride over familiar roads. If it’s still too firm, drop another 5 psi (e.g., 50F/45R), but don’t go below 45 psi unless you’re sure of your axle weights.
4. **Inspect Tires**: After a few days, check for even tread contact. If the edges wear more, you’re too low; if the center wears more, you’re still too high.
5. **TPMS Warning**: The tire pressure monitoring system might trigger a warning below 50 psi (varies by model year). If this bothers you, stick to 50 psi minimum.

### Caveats
- **Load Range E Tires**: These are stiff by design (max 80 psi), so even at lower pressures, the ride won’t feel like a car. For a dramatically softer ride, you’d need different tires (e.g., Load Range D) or suspension upgrades (e.g., Bilstein shocks).
- **Towing/Heavy Loads**: If you plan to haul or tow, increase pressures back to the door sticker values (e.g., 60F/80R) to support the weight safely.
- **Seasonal Adjustments**: Pressure drops about 1 psi per 10°F decrease in temperature, so adjust slightly in colder weather.

### Final Recommendation
For a smoother ride in your 2023 F-350 Tremor with stock tires, unloaded, try **55 psi front and 50 psi rear** as a starting point. This should noticeably soften the ride without sacrificing too much stability or safety. If you want it even smoother and don’t mind experimenting, 50 psi front and 45 psi rear could work, but monitor tire wear and handling closely. Let me know how it feels or if you tow often—I can adjust the advice accordingly!
 
For the 7.3L Gas Motor, 2024 F350, Lariat, with a 12k winch --> 50 psi front and 45 psi rear yields a good ride
 
Back
Top Bottom