MVI's F350 Build

25 May, 2024
2000 miles

Installed the RC Winch Mount on a 2024 Tremor 7.3L Gasser.

Bumper did not need to be cut in any fashion, Super simple install.
Trick is to mount the two support plates first , loosely.
The mount the winch plate, still keeping it all loose.

1716751182711.png




View looking directly up

1716751247965.png



1716751286132.png


I put the power lead into a protective sheath, and ran the ground and power to the Passenger side Battery. P Clamps for the win

1716751389048.png




1716753094715.webp
 
Last edited:
25 May, 2024
2000 miles


Added a G70 hook and an old warn fairleed I had laying around

1716751477560.png


1716751526804.png




Rough Country Fairlead is black, under the Warn as shown.
Had to clean up some rough spots in the Warn


2024-01-18 18.50.24.webp



2024-01-22 16.56.25.webp
 
Last edited:
25 May , 2024
2000 miles

Decided on the Blue Sea Fuse Block and 300A Fuse

1716752950330.webp


needed to slot the fuse holder in the Mill to make it work on the FORD Factory Terminal on Pass Side Battery

2024-05-26 13.22.41.jpg


There is plenty of hood clearance for the Blue Sea fuse holder.

Stainless washers top and bottom for a good electrical connection.


2024-05-26 13.29.40.jpg



Trimmed the OEM Cap a bit for the Blue Sea FUSE HOLDER

2024-05-26 13.31.19.jpg
 
Last edited:
26 May 2024
2000 miles

added cookie cooling racks to the JOB BOX,

keeps things dry if there is a torrential down pour or while hauling ass at 80mph in the rain

ScreenHunter 5067.webp
 
If you haven't gotten it yet, they're back in stock. Ordered mine today.

Service Help located Here



Service Manual can be ordered Here




View attachment 138506
II
 
2024 F350 came with a 2.5" hitch

1717034987514.webp


Even if you need to adapt this to an older Tremor @ 3" with a sleeve, It will still take the shock of the load to the 5/8" pin
 
2024 F350 came with a 2.5" hitch

View attachment 158299

Even if you need to adapt this to an older Tremor @ 3" with a sleeve, It will still take the shock of the load to the 5/8" pin
Ok, wasn't aware they went back to 2.5.
 
Very cool build so far! On my next truck I was looking at the ford winch, but now I’ll just go with the rc and save some cash.
 
  • Like
Reactions: MVI
27 June , 2024
2313 miles

Full XPEL Prime XR Plus treatment

70% for the Windshield
30% for the all 4 doors
30% for the back

1719529679767.webp
 
Last edited:
10 October, 2024
6110 Miles

Cabin Air Filter was shot , started to get that musty smell from running the AC in Texas after 10 months.

Replaced with a HEPA filter - SPEARHEAD BE-150H

1730381429533.png
 
Last edited:
11 October, 2024
6200 miles

WIPER TIME.
The OEM blades have been shot for a while. Worst OEM Blades I have ever had on a new vehicle

Replaced of course with Bosch ICONS
22A - Driver side
22B - PAX side

1730381557218.png
1730381577076.png
 
12 October, 2024
6300 miles

Replaced the Antenna with a 13" stubby.

So Far so good, FM reception is good. We use the XM 95% of the time anyway.

I put the OEM antenna under the back seat as a spare or if the stubby is stolen

Amazon - RYDONAIR 13"


1730381877210.webp
 
Let us know how that hepa filter works out. I replaced mine with the factory filter and the musty is still there.
 
Problem solved. No more musty smell

(edit) I experienced no loss of air flow
 
Last edited:
Let us know how that hepa filter works out. I replaced mine with the factory filter and the musty is still there.
I replaced my oem with a hepa, it constricted the air flow considerably, so replaced with a WIX non hepa. Air flow back to normal. FYI, truck almost 4 years old, 55k, have never had issues with a musty smell or otherwise.
 
I replaced my oem with a hepa, it constricted the air flow considerably, so replaced with a WIX non hepa. Air flow back to normal. FYI, truck almost 4 years old, 55k, have never had issues with a musty smell or otherwise.


I guess it depends on the CAF Brand - The HEPA I installed flowed the same as the OEM filter - No loss of air flow as felt at the vents !


1730382740973.png
 
Last edited:
Back
Top Bottom