Favorite Forscan Mod?

This is a forscan question, just bear with me on the explanation of what is the issue.

I recently put in alpharex luxx aftermarket led headlight assembly’s. These are designed to work with trucks that came as halogen. Which mine was. When the engine is off the outer drl strip looks great, when engine is running they flicker. They also dim a touch. I’m wondering if I can change the brightness of them if it would stop flickering.

They are tied in to the parking light plug, though they have another wiring harness that for the life of me I can’t tell how it makes a difference. I have tried completely disconnecting their wire harness canbus set up and the lights seem to operate fine with or without it. They may have nothing to do with the Drl and just be for the led projectors.

So here is the forscan question. I’ve heard you can change the brightness of the drl somwhere, but since this is actually tied into the parking light, any suggestions or experience on how and where to find that in forscan? It’s driving me crazy.
yes you can, it was for the C [ lights, might not help you but yes you can bump them under the DRL Fullbrightness setting. I would try that. but write your original config down.
 
I'd like the compression brake setting to be memory if that's possible

And disable the speed cancel of the rear locker. Sometimes I enjoy spinning the tires on purpose.

I haven't gone through all the options but I did the necessary ones right off the bat - seatbelt nuclear alert, TPMS values, lighting and so on. Be pretty cool to enable zone lighting at higher speeds as well. Nothing wrong with illuminating a ditch along the side of the road going faster than 5mph.
 
Thank you! I’ll give it a try today
Mine was already set to the settings in the spreadsheet unfortunately. Which is strange because it is definitely dimmer when the headlights are on, frankly as soon as I turn on the truck. Here is the part that makes this mystery even more convoluted. The manual for these lights say to turn off the daytime running light feature in the vehicle/lighting section of advanced and they are supposed to be controlled and I suppose on all the time by the headlights themselves. Though when I turn off the daytime running lights in the settings they don't turn off at all. So, I am wondering if any of the tweaking I'm doing regarding DRL actually does anything. And, of course, I can't reach the MFG.
It definitely dims though, which may be the parking light output but I can't seem to find a setting there. If I am able to find it in forscan I will report back, otherwise once I am done with the saga of getting these to work right I'll start a thread for others for troubleshooting if anyone else has the issue. Also, still open to creative suggestions. The lights themselves seem solid, weren't cheap, and I like the way the look and operate. Just got to fix this flickering issue. If anyone knows if the DRL brightness adjustments only works with trucks that had them originally and if there is a different physical plug. These are powered by the plug that also powers the parking lights. Does anyone have an actual wiring diagram of how the stock lights are wired as it pertains to the LED DRL bar and the parking lamps? I'm wondering if that can she some light.
I realize this is moving away from the intent of this particular thread, so If I need to move this elsewhere, point me that direction and I will get it off this. In the meantime my must have function, is the double honk disable! lol
 
Chime on start up and the annoying seat belt minder. I wear my seatbelt but not in the pasture or deer lease places like that.
 
Bambi mode. Actually responsible for saving 3 Bambi’s already.
 
Chime on start up and the annoying seat belt minder. I wear my seatbelt but not in the pasture or deer lease places like that.
You don't need forescan to turn off the seat belt chime. It's a simple process.. Google it.

I think it's like this. Turn on accessory mode. Wait for test lights to go out, buckle and unbuckle seat belt 3 times. Wait for eatbelt light to ho off and buckle unbuckle once m9re then lick your elbow. You have to do it for each seat.
 
Ok so what forscan updates are a must? Pictures for attention. Lol.
 

Attachments

  • IMG_5489.webp
    IMG_5489.webp
    71.9 KB · Views: 4
  • IMG_4155.webp
    IMG_4155.webp
    423 KB · Views: 4
  • IMG_4107.webp
    IMG_4107.webp
    448.5 KB · Views: 4
Lower the TPMS to a reasonable number so you can drive around empty without the light on all the time.
 
 
@BroncOh beat me to that one.
Additional good reading:
 

Merged. Thanks for the heads up @BroncOh (y)
 
@BroncOh beat me to that one.
Additional good reading:
Oops. Didn’t notice until after the premature…. Yeah, whatever…. That that was a link to the 23+
 
All - wanted to let those interested know that the very latest rev for FORScan (beta test) is out and will cover those with 2027’s. I did a few of the basic’s today (Bambi, TPMS) successfully and not unlike what many of you have likely performed with previous versions.

Although I don’t have a direct link attached, I think the email screenshot will get those interested in the right place.

Gonna’ give the Tire Size edit a go tomorrow…

Best to all - Tim

IMG_0853.webp
IMG_2208.webp
 
Back
Top Bottom