Favorite Forscan Mod?

Thanks I know that would work but having the f150 control module with the heated steering wheel button would be a great if all needed to do was change the module option in forscan.
If my memory is correct the steering wheel button on the raptor wheel is for selectable steering modes, not a heated steering wheel button.
 
Does anyone know if there’s a way to do the cameras in motion for the sync 4 trucks?
 
For the 2022 Sync4 some work at all times if you have the 360 pkg (bed cam, etc) but others require aftermarket solutions... I haven't found a Forscan solution. I can't say that any of this holds for the 2023 Sync4 as that is a different animal altogether... Sync and the electrical architecture are more "evolved".
 
If my memory is correct the steering wheel button on the raptor wheel is for selectable steering modes, not a heated steering wheel button.
Yea i think your right, i just looked at it and its just a wheel icon. For some reason i thought it was the icon for the heated wheel.
 
For the 2022 Sync4 some work at all times if you have the 360 pkg (bed cam, etc) but others require aftermarket solutions... I haven't found a Forscan solution. I can't say that any of this holds for the 2023 Sync4 as that is a different animal altogether... Sync and the electrical architecture are more "evolved".
Ok. I hate that I can’t check the cameras in motion. My Ram let me do it and it make it easier to quickly check the trailer without stopping.
 
Ok. I hate that I can’t check the cameras in motion. My Ram let me do it and it make it easier to quickly check the trailer without stopping.
The bed camera does work in motion without forscan shanges, and you should be able to see some of the trailer that way. But the other cameras do not unless you go with an aftermarket solution as mentioned.
 
The bed camera does work in motion without forscan shanges, and you should be able to see some of the trailer that way. But the other cameras do not unless you go with an aftermarket solution as mentioned.
I don't think that's true unless you have the 360 cameras...
 
I don't think that's true unless you have the 360 cameras...
This is true. The standard camera system doesn’t allow this. Even the 3rd brake light camera won’t work in motion. I was hoping there was a way since I know the 360 camera system allows it.
 
The bed camera does work in motion without forscan shanges, and you should be able to see some of the trailer that way. But the other cameras do not unless you go with an aftermarket solution as mentioned.
Nope. I don’t have the 360 camera system to let me do that.
 
For the 2022 Sync4 some work at all times if you have the 360 pkg (bed cam, etc) but others require aftermarket solutions... I haven't found a Forscan solution. I can't say that any of this holds for the 2023 Sync4 as that is a different animal altogether... Sync and the electrical architecture are more "evolved".
i can confirm my 23 can also check the bed while in motion. i also noticed the front camera is turned on automatically when i switch to "off-road" drive mode.
 
Ahh. Didn’t realize it was only with the 360 package
 
Can you point me in the direction of where to enable that?
Lol, no I cannot as a friend did it for me. But I am confident someone here will assist you!
 
Can you point me in the direction of where to enable that?
Haven't checked in a while to see if it is available in the plain english picks yet. Here is the list @MiTremor906 put together for his changes:


If your existing As-Built looks different than his let me know and I can give you the revised string to enter...
 
Haven't checked in a while to see if it is available in the plain english picks yet. Here is the list @MiTremor906 put together for his changes:


If your existing As-Built looks different than his let me know and I can give you the revised string to enter...
I would have thought this would be in plain english by this point. But never a good idea to assume.
 
And to add to this: the reason it doesn’t compute for me is the reward. What does the driver get out of going even faster than those people doing 10mph over an already high speed limit?

Get to their destination a minute or two faster? An adrenaline rush? To not be behind someone?

And that’s what I’m really asking about I guess. What’s the reward that is so valuable to justify the effort of multiple attempts to remove the speed limiter, don’t mind the risk of going those speeds?

No requirement to respond. It’s an open forum. But I’m legitimately curious.
Trying to make some big passes out in the desert and hitting your speed limiter, and having that actually jeopardize whether you can effectively pass a group a cars, absolutely sucks. These 6.7s accelerate fast and you'll hit that limit quickly out in parts of the country where 85 on the highway is normal.
 
This is a forscan question, just bear with me on the explanation of what is the issue.

I recently put in alpharex luxx aftermarket led headlight assembly’s. These are designed to work with trucks that came as halogen. Which mine was. When the engine is off the outer drl strip looks great, when engine is running they flicker. They also dim a touch. I’m wondering if I can change the brightness of them if it would stop flickering.

They are tied in to the parking light plug, though they have another wiring harness that for the life of me I can’t tell how it makes a difference. I have tried completely disconnecting their wire harness canbus set up and the lights seem to operate fine with or without it. They may have nothing to do with the Drl and just be for the led projectors.

So here is the forscan question. I’ve heard you can change the brightness of the drl somwhere, but since this is actually tied into the parking light, any suggestions or experience on how and where to find that in forscan? It’s driving me crazy.
 
Back
Top Bottom