Aftermarket Wheels & Tire size/offset photos

Sending you a PM with pricing now. I currently have 3 sets of the NV HD in stock and ready to ship in 17" for the Super Duty. The NV HD in a 17" for the Super Duty is a 17x8.5 0 offset wheel. So it will stick out a bit, but not too bad. Here's some pictures:

d765528a_8867_4631_93f7_755c5f23a0ae_1151f7c8901910292b4469b61dff01427ab2f286.jpeg

d61dc1e2_76db_445a_9c7d_bf7b42d5fd9e_ccd57a132a872ca7c6c8df847943629b8c996901.jpeg
Can you fit a 40" Nitto with that wheel under a Carli 4.5 pin top?
 
Last edited:
For those interested in swapping wheels this thread might be a good resource. One of the most frequent questions is "What will this offset look like, or how far will it stick out". If you have upgraded to new wheels, please help us out by posting the size wheel / tires and offset with detailed photos.

Here's an example of 20x10 wheels mounted with 35x12.50r tires. The wheels have a negative 18 offset.

View attachment 986

View attachment 987
Stock height or is it lifted ?
 
What did you use to lift it 1.5” front ? Is that 1.5” plus the stock tremor lift ? So it’s around 3.5 total?
No, I used rough country 1.5" lift springs. The truck sat a little over an inch higher than the stock springs.
 
Can you fit a 40" Nitto with that wheel under a Carli 4.5 pin top?

On the street with cutting your fenders and bumper spacers or aftermarket bumper, probably. If staying stock, I wouldn't go past 38s. Even Carli only recommends a max tire size of 37x13.50Rxx for the 4.5" kit with this size wheel/offset.
 
Thanks you for that info. First super duty, never knew. 👍
On the street with cutting your fenders and bumper spacers or aftermarket bumper, probably. If staying stock, I wouldn't go past 38s. Even Carli only recommends a max tire size of 37x13.50Rxx for the 4.5" kit with this size wheel/offset.
 
I have a reg f250 xlt with a pintop carli kit, i put method 18 x 9 with a +18 offset with 35" BFG's. Do you feel like you get enough coverage with the OE fender flares? My offset is +18 as well and was looking at adding flares on. I bought weather tech mud flaps but wasn't sure if the flares would cover my wheels. Trying to stay away from the pocket
Stock tires on Method 701 HD 18"x9" with +18 offset. The wider than stock rim with less positive offset pulled the tires out roughly an inch, to flush with the fender flares.View attachment 28309
you got front and back pics of tire flushness?
Thanks
 
After a lot of discussion I pulled the trigger on:
Method 701HD Black 18x9 +18 offset wheels
Nitto Ridge Grappler 35x12.5R18 tiresView attachment 20652View attachment 20653View attachment 20654View attachment 20655
After a lot of discussion I pulled the trigger on:
Method 701HD Black 18x9 +18 offset wheels
Nitto Ridge Grappler 35x12.5R18 tiresView attachment 20652View attachment 20653View attachment 20654View attachment 20655
Hey Briski i just ordered same rims and tires as you. Do i need different wheel bolts or all the stock hardware good?
Thanks
 
Hey Briski i just ordered same rims and tires as you. Do i need different wheel bolts or all the stock hardware good?
Thanks
You need the Method black spline drive lug nut to ensure they seat correctly and for clearance to torque them. I bought them directly from Method. Keep a set of your stock lug nuts for the spare. Hope this help. 🍻
 

Latest Discussions

Back
Top