22 Black Bear 🐻 Build

Exciting! Funny we are doing the same thing today!

I have my anemometer, so I’m going to measure the wind speed of the air vents before and after. 🤓 💨

View attachment 128700
It would be interesting to also capture the wind speed without a filter to see how much both filter types impede airflow.
 
It would be interesting to also capture the wind speed without a filter to see how much both filter types impede airflow.
Let's go full factorial on this!!
 
Okay, I’ll get a video up at some point, but here’s the preliminary results of the tests…

I drove the truck to get it up to operating temp before starting all of these tests. Here are the fastest speeds I recorded for each. The vents definitely didn’t seem to be blowing as hard on the third test… I’ll take measurements again tomorrow when I have the truck on max AC again and up to operating temp to see if I get the same results as today.

Factory Cabin Air Filter with Approx. 22k Miles on it
Center Dash Left Vent: 4.2 m/s
Center Dash Right Vent: 4.8 m/s

No Cabin Air Filter
Center Dash Left Vent: 4.3 m/s
Center Dash Right Vent: 4.7 m/s

New K&N Performance Cabin Air Filter
Center Dash Left Vent: 4.2 m/s
Center Dash Right Vent: 4.2 m/s

—————————————————
I used this anemometer from Amazon:

I used this K&N High Performance Cabin Air Filter VF2049:
 
Okay, I’ll get a video up at some point, but here’s the preliminary results of the tests…

I drove the truck to get it up to operating temp before starting all of these tests. Here are the fastest speeds I recorded for each. The vents definitely didn’t seem to be blowing as hard on the third test… I’ll take measurements again tomorrow when I have the truck on max AC again and up to operating temp to see if I get the same results as today.

Factory Cabin Air Filter with Approx. 22k Miles on it
Center Dash Left Vent: 4.2 m/s
Center Dash Right Vent: 4.8 m/s

No Cabin Air Filter
Center Dash Left Vent: 4.3 m/s
Center Dash Right Vent: 4.7 m/s

New K&N Performance Cabin Air Filter
Center Dash Left Vent: 4.2 m/s
Center Dash Right Vent: 4.2 m/s

—————————————————
I used this anemometer from Amazon:

I used this K&N High Performance Cabin Air Filter VF2049:
I would be interested in seeing how a brand new OEM filter would perform in this test condition. Mainly curious vs. the new K&N... With engine air filters a used filter will often out perform a brand new filter.

I'd be willing to pitch in some $ to support the scientific findings @legmar 😎
 
I would be interested in seeing how a brand new OEM filter would perform in this test condition. Mainly curious vs. the new K&N... With engine air filters a used filter will often out perform a brand new filter.

I'd be willing to pitch in some $ to support the scientific findings @legmar 😎
Guess I better swing by AutoZone for a Motorcraft Cabin Air Filter FP-79! 👊😃
 
Interesting that you go the max airflow with the OEM filter in place and air flow reduced on that side with the filter removed while increasing on the other.

Between the OEM filter and no filter, it seems like the results were a wash, and with the K&N, no meaningful improvement.

I wonder if the test would improve closing all vents except for one to get the airflow directed to one point.
 
Here’s a little teaser for the bracket I’m building to hang my air horn! More to come soon!
IMG_7310.webp
 
Napa auto parts has a Holiday discount code WINTER20 good through 12/10 that is a 20% discount. It’s good for about $150 savings when purchasing 2 odyssey extreme group 65 AGM batteries. 🔋


IMG_8206.webp
 
The internet never fails to be entertaining. I posted a video of my hail bubble on the truck, and I think I broke some people. 😅
The comments have been wild!! 😄

I heard back from the Hail Protector company! They gave us a discount code in case you want your own bubble!

Use code LEGMAR30 for $30 off. The link below is also an affiliate link, so I get a commission if you buy through my link. Thanks! 😃

 
Ty over at BAM sent me his new and improved 360º Swivel Light Mounts. I was excited to get them swapped out on my truck since he also sent me the double to single hole adapter to make the overall look cleaner on my SDHQ A-Pillar brackets.
Great video! How long was the 5/16 bolt you used? I am going to try this on a T-Slot application and want to get the bolt while mine is being shipped.
 
Great video! How long was the 5/16 bolt you used? I am going to try this on a T-Slot application and want to get the bolt while mine is being shipped.
Thanks! Here’s what I used. Looks like 1 inch.

IMG_8603.webp
 
Had Brian at No Sweat Window Tint in Kerville, TX give my truck the SunTek ceramic treatment yesterday. He’s a fantastic guy. I would absolutely use him again for any vehicle or my home.

Clear tint on windshield. Brow to AS1 line.
Clear tint on sunroof (for heat reduction).
Legal limit on front doors.
Limo tint on rear doors and back glass.

No Sweat Window Tinting
(830) 367-4563

Before:
IMG_8792.jpeg


After:
IMG_8924.jpeg
IMG_8925.jpeg
IMG_8922.jpeg
IMG_8921.jpeg
 
Last edited:
Back
Top Bottom