2024 MY Super Duty Order/Schedule/Build Thread

[Emax]

Wow that sucks

 

[Maine Guide]

 

[Tugboat]

Unicorn picked up Tues on the road back to Idaho - shout out to Shelby and Hayleigh at Granger a really painless process

 

[BigHust]

Unicorn picked up Tues on the road back to Idaho - shout out to Shelby and Hayleigh at Granger a really painless process

She’s a beaut!! Congratulations and be safe!!

 

[GentleBen]

Mine did the exact same thing and was at the dealer the next day.

I wish I could say I'm that lucky. I've been on Ford CS , Ford Marketing, and the dealer today and nobody can say where the truck actually is. Ford says by 4/19. Dealer says 4/27 - 5/3 per the shipping company. There continues to be no rail car info.

 

[Txtruckguy]

Dealership informed me that my truck is in New Orleans at the port. But the port is telling them 4-6 weeks to ship the truck from.the port to the Dealership. Is the New Orleans port that backed up because of the bridge in Baltimore?

 

[P32pac]

Been watching this website for quite a while. Lots of great information. I ordered MY24 F350 Platinum Tremor H/O Antimatter Blue on 8/2/2023. And like most of us sat and waited & waited. Finally picked it up on 4/15. Hope everyone else gets theirs soon.

 

[Emax]

Nice congrats on the new truck I’m still waiting and waiting

 

[Mr Salty]

Been watching this website for quite a while. Lots of great information. I ordered MY24 F350 Platinum Tremor H/O Antimatter Blue on 8/2/2023. And like most of us sat and waited & waited. Finally picked it up on 4/15. Hope everyone else gets theirs soon.

Welcome to the forum. Nice truck! Looks a lot like mine will when I p/u in a couple weeks. Can you tell me what size the receiver is for the hitch?

 

[poopy_pants]

Welcome to the forum. Nice truck! Looks a lot like mine will when I p/u in a couple weeks. Can you tell me what size the receiver is for the hitch?

Should be 2.5”. I just towed with mine over the weekend and used my old Weigh Safe 2-1/2" Ball Mount With Scale - 6" Drop.

 

[P32pac]

Definitely a 2.5. All 3/4 & 1 tons now have a 2.5.

 

[poopy_pants]

It's on page 9 for reference. https://www.vdm.ford.com/content/da.../2024-Ford-Super-Duty-Pickup-Towing-Guide.pdf


FACTORY-INSTALLED TRAILER HITCH RECEIVER OPTION
F-250/F-350/F-450 Super Duty Pickups
A 2.5" hitch receiver is standard on all models except for the following configurations which get
a 3" hitch receiver:
• F-350 DRW Crew Cab with 6.7L H.O. Diesel engine with 4.10 FDR (Final Drive Ratio)
• F-450 Crew Cab with 6.7L and 6.7L H.O. Diesel engines

 

[Mr Salty]

It's on page 9 for reference. https://www.vdm.ford.com/content/da.../2024-Ford-Super-Duty-Pickup-Towing-Guide.pdf


FACTORY-INSTALLED TRAILER HITCH RECEIVER OPTION
F-250/F-350/F-450 Super Duty Pickups
A 2.5" hitch receiver is standard on all models except for the following configurations which get
a 3" hitch receiver:
• F-350 DRW Crew Cab with 6.7L H.O. Diesel engine with 4.10 FDR (Final Drive Ratio)
• F-450 Crew Cab with 6.7L and 6.7L H.O. Diesel engines

Thank You!

 

[Maine Guide]

 

[Mr Salty]

View attachment 153227

Very Nice! I know you’re excited!!!

 

[Tugboat]

Very Nice! I know you’re excited!!!

what a beauty -

 

[Crappieman]

Been a short wait compared to some of you. Arrived at dealership in west KY on Saturday. F250 Tremor, BAP, smart hitch, 6.7 HO, Rapid sup. heat, not too crazy and not plain either.

 

[Crappieman]

Been a short wait compared to some of you. Arrived at dealership in west KY on Saturday. F250 Tremor, BAP, smart hitch, 6.7 HO, Rapid sup. heat, not too crazy and not plain either.

 

[grootvm]

Finally made road trip to get this beauty. Been sitting in the lot waiting for me a few weeks. Unfortunately, had a little nick on tail gate molding. Going to be taken care of. But that tail gate, they say is as flush as can get it….anyone’s tailgate look the same? Anyone have a better seal?

 

[shake_n_bake]

I ordered mine back in Nov '23 and haven't gotten past "Accepted by Manufacturer" without a VIN assigned. I ordered a '24 F-250 King Ranch Tremor with 6.7 HO, LED roof lights, a Tough bed, an engine block heater & Rapid-Heat supp Cab heater for when I retire and move to Alaska in about 3 years with the wife and kids. It's been 5 months and all I'm hearing from my dealer is that the order has been submitted and there's a backlog at the factory (I know the Kentucky plant has had some QC issues, maybe that's why?).