Light bar mounts

[Stephane]

Looks like it tucks up close. Does it obstruct the front camera at all?

All good, no obstructions at all.

Did it come with mounting brackets?

yes it did come with brackets but I opted to make my own in order to have the light Closer to the grill and more burglar proof .

 

[ftchmup]

I got my rear Zroadz lights in today and they sent me 2 left brackets ?

??

 

[AKDV]

Do you have a drawing or pictures of just the brackets you made?

 

[abill]

I have seen some that people have removed the narrow horizontal bars at the top or bottom on the grille and installed the light bars in the locations that we're removed... installed like that they look sharp.

 

[Worley]

yes it did come with brackets but I opted to make my own in order to have the light Closer to the grill and more burglar proof .
[/QUOTE]

Do you have a picture of the brackets you made and how you mounted them?

 

[Kgorman]

I have the standard headlights, and looking to upgrade the fogs to Baja Design, but I’m not sure these will fit ‘20 fog cutouts: https://www.bajadesigns.com/products/Ford-Super-Duty-17-18-F-150-15-18-SAE-Fog-Pocket-Kits.asp

 

[ftchmup]

I have the standard headlights, and looking to upgrade the fogs to Baja Design, but I’m not sure these will fit ‘20 fog cutouts: https://www.bajadesigns.com/products/Ford-Super-Duty-17-18-F-150-15-18-SAE-Fog-Pocket-Kits.asp

I like those, I bet they would light up the night. let see um if u get them.

 

[Worley]

FYI for anyone getting the ZROADZ 30” front bumper light, the brackets will work but the light bar sticks out way too far and looks like sh*t. The 2020 must be slightly different than previous years. I did some modifications to the brackets and now the light bar is all the way against the grill. I did drill and bolt directly into the bumper (it’s just an old work truck). I can barely see a slight shadow with the 360 overhead view camera. I lost about 1/4” view of the front facing camera. Overall I am happy with it and it is bright as hell!! (See before and after pic of front facing camera). The rear ZROADZ do mount correctly on the 2020. I will post pics of those when my correct bracket gets here tomorrow.

 

[Whyte Rhyno]

Not sure if I posted this question before but has anybody else Thought about mounting flush mount light pods under the led fog laps in that black void? Or is it just me?

 

[amclaen]

FYI for anyone getting the ZROADZ 30” front bumper light, the brackets will work but the light bar sticks out way too far and looks like sh*t. The 2020 must be slightly different than previous years. I did some modifications to the brackets and now the light bar is all the way against the grill. I did drill and bolt directly into the bumper (it’s just an old work truck). I can barely see a slight shadow with the 360 overhead view camera. I lost about 1/4” view of the front facing camera. Overall I am happy with it and it is bright as hell!! (See before and after pic of front facing camera). The rear ZROADZ do mount correctly on the 2020. I will post pics of those when my correct bracket gets here tomorrow.

Thanks for posting this. I’m just going to order a 40” bar and cnc plasmacut my own brackets out since these zroadz ones aren’t quite up to par. They worked nice on my 18 Raptor

 

[20F350]

Not sure if I posted this question before but has anybody else Thought about mounting flush mount light pods under the led fog laps in that black void? Or is it just me?

I thought the ex same thing when I saw that.
I’d assume it’s only a matter of time before someone makes a kit....hopefull!

 

[Worley]

Finally got the replacement bracket in from ZROADZ today for the passenger side rear bumper light. Now I can see backing into my garage right up to my Road Glide. They sit higher than the hitch, so it should not affect approach or departure angles.

 

[4kracing]

Finally got the replacement bracket in from ZROADZ today for the passenger side rear bumper light. Now I can see backing into my garage right up to my Road Glide. They sit higher than the hitch, so it should not affect approach or departure angles.

This looks clean! Are they plenty bright and worth the money?

 

[Worley]

This looks clean! Are they plenty bright and worth the money?

Super bright!! Well worth the money to me.

 

[EVAR]

I have the standard headlights, and looking to upgrade the fogs to Baja Design, but I’m not sure these will fit ‘20 fog cutouts: https://www.bajadesigns.com/products/Ford-Super-Duty-17-18-F-150-15-18-SAE-Fog-Pocket-Kits.asp

I asked Baja Designs about the light set up they had on a SuperDuty they told me they were coming out with a kit for 2020 soon:

View this content on Instagram

View this content on Instagram

 

[99superduty]

Anybody mounted a light bar behind the grill yet?

 

[Runner799]

I installed a Rigid 40” RDS Midnight curved lightbar and it fits like a glove with the grill.View attachment 1124

What mount you running ?

 

[Runner799]

Ordered Baja design 30" OnX6 Arc dual control with bracket and upfitter harness. Will post pic when installed

 

[Mountain Man]

Ordered Baja design 30" OnX6 Arc dual control with bracket and upfitter harness. Will post pic when installed

I can't wait to see that as I'm thinking about the same setup. Please post pics as soon as you can!

 

[BKTXFord]

Thought about the rear light mounts they make as well. Decided against it based on how low they sit. The hitch frame has oval shaped holes just ahead of the horizontal draw bar. I think I’ll tuck some small rigid sr series lights up and out of the way there. With a diffused beam it should provide perfect lighting for the back. Still deciding though.

I mounted mine directly to the middle bumper bolts so they didn't sit too low.