Winch rope tear from bolt

  • OP ๐Ÿ”น OP ๐Ÿ”น Guest4293
  • Start date Start date
G

Guest4293

Guest
I actually asked the Dealer to be aware of this issue and now have a torn rope from the two bolts that attach the air damn to the body up front. They are not very big but if you have "any" slack in rewinding the rope they will catch it and tear it.
 

Attachments

  • Air dam bolt1 redlined.webp
    Air dam bolt1 redlined.webp
    146.9 KB · Views: 927
  • winch rope with tear.webp
    winch rope with tear.webp
    302.9 KB · Views: 193
  • Staff ๐Ÿ›ก๏ธ
  • #2
I actually asked the Dealer to be aware of this issue and now have a torn rope from the two bolts that attach the air damn to the body up front. They are not very big but if you have "any" slack in rewinding the rope they will catch it and tear it.
Can't these bolts just be flipped? :( Sorry that this happened.
 
I think so and will have the Dealer make the repair. I read about this but thought it was a problem with the winch assembly so missed this.
 
  • Staff ๐Ÿ›ก๏ธ
  • #4
I think so and will have the Dealer make the repair. I read about this but thought it was a problem with the winch assembly so missed this.
I had thought it was a different bolt too - so I am happy to posted it.
 
FYI the winch rope is perfectly fine, it has a safety factor figured into it. Will not affect the rope rating.
 
Read the instructions? Really? That's for DIYers!
 
I actually asked the Dealer to be aware of this issue and now have a torn rope from the two bolts that attach the air damn to the body up front. They are not very big but if you have "any" slack in rewinding the rope they will catch it and tear it.

As everyone is saying, Ford has updated install instructions that have been out for a long while now (since March 2021) addressing those bolts. It's literally the first page in the instructions and cannot be missed.

Here's the updated instructions, in case you want your own reference or want to provide them directly to the dealer:


I got the link to the instructions from the main page for the winch:

 
This is a known issue and Ford installers should be trimming or replacing that bolt. The guy in this video replaced the air dam bolt with a round button head Allen bolt which fixes the issue.

Hey, that guy is me. ๐Ÿ˜„
For what itโ€™s worth, there is a comment on the video that links to Fordโ€™s updated instructions. The old instructions failed to address this critical step.
 
I'd definitely try to get the dealer to correct the bolts and replace the winch rope if it were me - I feel that's pretty reasonable.

Did the original version of the instruction not have this information - or was it not sufficiently emphasized??
 
I'd definitely try to get the dealer to correct the bolts and replace the winch rope if it were me - I feel that's pretty reasonable.

Did the original version of the instruction not have this information - or was it not sufficiently emphasized??
Original version didn't have it. It was revised later once the flaw was discovered by ropes being frayed.

The instructions were revised but yet they still ship the winch kit without the required M6 button head cap screws, part # W711581S450B
 
Glad to see this in advance. Sent this info to my dealer and he'll make sure to focus on that spot since they don't install a lot of these.
 
Good to know but sorry about the unfortunate situation. Take that shit back.
 
I actually asked the Dealer to be aware of this issue and now have a torn rope from the two bolts that attach the air damn to the body up front. They are not very big but if you have "any" slack in rewinding the rope they will catch it and tear it.
First of all thank you for this thread.
I have a 2020 Tremor with a winch. It was installed in summer 21 by my dealership. I gave them the whole deal from our threads here. I told them about some concerns.

Long story short, I use my winch on my Jeep Wrangler and did not use the new Tremor winch.


I saw this thread and thought well lets check it out, I am sure its good to go. WRONG. IF you want something done right do it your self!!!!!!!!!

No damage since I did not use it. BUT the bolt would have caused damage for certain. I took it out along with the clip nut.

I found this little bolt in my tool box and dropped it in from the top down with a nut and washer on the bottom.

All fixed Thanks again ( this is why I alway try and do my own work)
IMG_0111.webp
 
I know this has been posted but do any of you guys have the picture or link to picture of the bolts so I can check mine.
 
I know this has been posted but do any of you guys have the picture or link to picture of the bolts so I can check mine.
Just crawl under the front bumper with a small flashlight. look at the winch rope from the back side and look at the small bolts that hold the black rubber air dam ( the mini tremor one we all talk about). see if you can see threads that stick up past the clip nut that could get caught on the winch rope. If you just cut down the bolt the clip nut could still catch, that is why I took it out and placed a different type bolt with a smooth head in place. On mine there was only one bolt ( that could contact the rope). All the others are fine. You will need a 8mm socket to remove them.
 
Here are the pictures again. Taken from under the front of the truck facing forward under the winch rope spool.
 

Attachments

  • Air dam bolt1 redlined.webp
    Air dam bolt1 redlined.webp
    146.9 KB · Views: 75
Back
Top Bottom