Winch rope tear from bolt

  • OP ๐Ÿ”น OP ๐Ÿ”น Guest4293
  • Start date Start date
Yep I got those too. Old hardware is in a ziplock in the glove box. Think I'll buy some stainless button heads from McMaster. I'm kind of anal. ๐Ÿ˜
I was spraying CRC corrosion protection all up in there and on anything not protected. This truck is going to last me a while.
 
Dealer owes you a rope. Period. That's a $600 rope direct from Warn. Probably more from Ford. You can buy other brands for less, but why should you have to pay for their screw up?

 
FYI the winch rope is perfectly fine, it has a safety factor figured into it. Will not affect the rope rating.

I strongly disagree. In 20 years of offroading many of the hardest trails all across this country and lots of winching, I've seen a lot of failures and learned a lot. That rope has been compromised and will likely fail where it is damaged. Why take a chance using damaged equipment when the dealer screwed up and owes him a free one?
 
I strongly disagree. In 20 years of offroading many of the hardest trails all across this country and lots of winching, I've seen a lot of failures and learned a lot. That rope has been compromised and will likely fail where it is damaged. Why take a chance using damaged equipment when the dealer screwed up and owes him a free one?
As a rescue heavy rigger, most winch ropefailures are do to improper winching techniques and operator error. I agree the dealer owes him a new rope, but I would throw the new one under the seat and keep rocking on.
 
As a rescue heavy rigger, most winch ropefailures are do to improper winching techniques and operator error. I agree the dealer owes him a new rope, but I would throw the new one under the seat and keep rocking on.

Better idea yet, keep the good part and turn it into a winch extension rope. The weaving isn't the hard to do if you don't mind buying a wire basket fid.
 
Well, I just picked up my truck after having the winch installed. I had taken delivery already, but the winch hand't come in, so I dropped it off for the day to have it installed. Despite me mentioning the service update from Ford about the bolts needing to be reversed they still managed to screw it away. I inspected it before driving away and confirmed what I was half expecting. I didn't mention anything to the service rep that I had already told about this issue and elected to correct myself. I had my mind made up that this was the route I would take before picking up the truck. Nobody working in service at the dealership wants to hear some guy tell him how to do his job (even if I know more than he does about this specific topic) and I knew the fix would be easy as long as no damage was done to the winch cable (which was undamaged).

All I did was:
1: Remove the bolts and clips
2: Re install the clips reversed
3: used zip ties to hold the clips and spoiler in their new position and trim the excess.

Yea Yea I know zip ties are a redneck engineering way to go, bit why the eff not? Its not a structural component or anything like that and getting a wrench into that part would be a HUGE PITA.

Anyone foresee any issues about my solution aside from the potential victims of incorrect install from this dealer in the future? I plan to give them a debrief once I have a solid solution.

Beers and bourbons all around! I am grateful for this community!
 
Sorry but I wouldnโ€™t put a load on that winch line now. The only good thing is that itโ€™s synthetic and not steel. But I worked offshore and even a synthetic mooring line can decapitate someone on a supply boat, as it happened once. I was glad I was sleeping and it wasnโ€™t my tower to work but it was ugly. Donโ€™t mess with any frayed winch line. Period. Replace it.
 
Sorry but I wouldnโ€™t put a load on that winch line now. The only good thing is that itโ€™s synthetic and not steel. But I worked offshore and even a synthetic mooring line can decapitate someone on a supply boat, as it happened once. I was glad I was sleeping and it wasnโ€™t my tower to work but it was ugly. Donโ€™t mess with any frayed winch line. Period. Replace it.
Itโ€™s not frayedโ€ฆ
 
I guess it depends on your definition of frayed. You go ahead and use that rope if you want. I wouldnโ€™t use it to pull your truck out even if it isnโ€™t โ€œfrayed.โ€
 
I guess it depends on your definition of frayed. You go ahead and use that rope if you want. I wouldnโ€™t use it to pull your truck out even if it isnโ€™t โ€œfrayed.โ€
Why not use an undamaged rope? Doesnโ€™t make any senseโ€ฆ
 
That was my original point. That particular rope was/is damaged. Iโ€™d definitely insist the dealer who installed the winch replace it with a new one. It came with a new rope!
 
Why not use an undamaged rope? Doesnโ€™t make any senseโ€ฆ

That was my original point. That particular rope was/is damaged. Iโ€™d definitely insist the dealer who installed the winch replace it with a new one. It came with a new rope!
I think there may be a miscommunication happening here. :)

@DDD if you're referring to OP's post that started this thread, then yes that rope is damaged.

@Bpete12 assumed you were responding to their post outlining their experience, which did not have a damaged rope as they caught the issue before damage was done.

So I believe two different ropes are being talked about. Or I'm totally out to lunch on this, in which case...ignore me. :P
 
Nope. I get it now. I was probably out to lunch. Maybe we should go to lunch!! I was referring to the picture of the rope. We were just talking past each other in different contexts which happens sometimes. Weโ€™re in agreement that a new or good rope needs to be the solution of the OP can get the dealer yo fix their screwup.
 
Nope. I get it now. I was probably out to lunch. Maybe we should go to lunch!! I was referring to the picture of the rope. We were just talking past each other in different contexts which happens sometimes. Weโ€™re in agreement that a new or good rope needs to be the solution of the OP can get the dealer yo fix their screwup.
Indeed! Glad I could help get y'all on the same page. :)
 
Ahhh yes it all makes sense now! OPโ€™s rope for sure needs replaced.
 
  • Like
Reactions: ccw
If dealer would have followed installation instructions, they would have replaced these 2 bolts with the correct ones to avoid this issue. It is clearly stated in the instructions.
I told my dealer about that, circled the note on the instructions which is step one, they didn't put the recommended bolts in, in their defense they didn't have them ๐Ÿ™„. the did flip them over at least. So when I went to get it I checked and had them order the bolts, my fault for assuming they would order them first time. In the end they still only put one in.
 
When I picked my truck up mine was installed with original longer screws as well - due to another thread on this topic, I knew too look for it. I found they screws sticking up into the winch spool where it was eventually going to hit.

My fix:
1. Popped out the two screws in questions
2. Drive to hardware store
3. Picked up various shorter lengths of same screw
4.. Installed shorter screws, that fit, but did not stick out - same direction as OEM - issues resolved

If you used zip ties - I would go to hardware store and buy shorter screws - they are like $0.20 - throw on with a little locktight and you are good to go with much stronger hold that zip tie and less chance of a failure that leaves your splitter hanging down.
 
When I picked my truck up mine was installed with original longer screws as well - due to another thread on this topic, I knew too look for it. I found they screws sticking up into the winch spool where it was eventually going to hit.

My fix:
1. Popped out the two screws in questions
2. Drive to hardware store
3. Picked up various shorter lengths of same screw
4.. Installed shorter screws, that fit, but did not stick out - same direction as OEM - issues resolved

If you used zip ties - I would go to hardware store and buy shorter screws - they are like $0.20 - throw on with a little locktight and you are good to go with much stronger hold that zip tie and less chance of a failure that leaves your splitter hanging down.
they only put one in on mine cuz they said they'd have to take it apart to get a wrench on the Allen hood screw. Did you just use hex head?
 
they only put one in on mine cuz they said they'd have to take it apart to get a wrench on the Allen hood screw. Did you just use hex head?
Have to check head - don't recall - but I think it was a standard screwdriver head, not a hex head. Will take a look when I get home and let you know.

But I do recall that one was clearly a concern, more toward the middle of the spool -the other was off to the side (passenger side of truck) and did not look like it would be an issue, but I replaced anyway out of caution. So maybe that is why the dealer thought one was all that was needed.
 
Back
Top Bottom