🛠️ What did you do to your Tremor today? [2026 edition]

Any time I hear someone say their wife is 5' or under, this is what I see 😂

8d2cd84db6a53cd1bdfd3c3a0b38747c.webp
 
I tried to do auto hold, but it wont turn on after I write it.
Did you complete all of the steps? I think there was like three different settings that had to be changed to make this work. Did it to my 2026 and works great!
 
Did you complete all of the steps? I think there was like three different settings that had to be changed to make this work. Did it to my 2026 and works great!
No, apparently I'm missing 2 steps. Youtube's a help but a bitch too with different folks saying different things.
 
No, apparently I'm missing 2 steps. Youtube's a help but a bitch too with different folks saying different things.
Found it!

Changes:

Plain language:
APIM: Auto hold enable
IPC: Auto hold enable

As built:
ABS 760 03 01: *xxx - xxxx-xx change to 3 (original value on mine was a 2)
 
Last edited:
Found it!

Changes:

Plain language:
APIM: Auto hold enable
IPC: Auto hold enable

As built:
ABS 760 03 01: *xxx - xxxx-xx change to 3 (original value on mine was a 2)
Thanks. I’ll dig back in there and work on that.
 
Just picked it up this morning definitely has some noticeable height difference still drives great. The shot of the hood is at my eye level im a little over 5ft 9in. Id say it sits the same as my 2017 on a 6 inch and 38s. I can definitely say ill need minimum 38s the 37s look so small now. Overall happy woth how it turned out was a little sticker shocked at the install cost they charged 10 hours plus the alignment at 160$ an hr but it is what it is since I dont have the tools or space to do this.
 

Attachments

  • 20260626_102451.webp
    20260626_102451.webp
    223.7 KB · Views: 57
  • 20260626_102328.webp
    20260626_102328.webp
    555.9 KB · Views: 63
  • 20260626_102304.webp
    20260626_102304.webp
    646.9 KB · Views: 65
  • 20260626_102242.webp
    20260626_102242.webp
    652.5 KB · Views: 64
  • 20260626_102237.webp
    20260626_102237.webp
    765.9 KB · Views: 84
Just picked it up this morning definitely has some noticeable height difference still drives great. The shot of the hood is at my eye level im a little over 5ft 9in. Id say it sits the same as my 2017 on a 6 inch and 38s. I can definitely say ill need minimum 38s the 37s look so small now. Overall happy woth how it turned out was a little sticker shocked at the install cost they charged 10 hours plus the alignment at 160$ an hr but it is what it is since I dont have the tools or space to do this.
I like the dog is sniffing where its junk would be if it was a dog. Trying to check out the Alpha in the driveway.
 
Just picked it up this morning definitely has some noticeable height difference still drives great. The shot of the hood is at my eye level im a little over 5ft 9in. Id say it sits the same as my 2017 on a 6 inch and 38s. I can definitely say ill need minimum 38s the 37s look so small now. Overall happy woth how it turned out was a little sticker shocked at the install cost they charged 10 hours plus the alignment at 160$ an hr but it is what it is since I dont have the tools or space to do this.
Congratulations, brother! Looks awesome! 38's would definitely finish it off. Enjoy it! 👊
 
Where in Alberta did you get him? I used to work near Wabasca.
 
Back
Top Bottom