🛠️ What did you do to your Tremor today? [2026 edition]

Think Apples was talking about installing the Gator Back mud flaps. Yes reversing the boards took me probably 10-15 minutes with the M12 ratchet. I’m old and slow but got lots of time I hope.
 
After 4 months of waiting (due to my schedule + lead time) I was Finally able to ditch the Toyo AT3s and KMCs. Now running a set of the new 37" Yokohama AT4 XDs on 17" Nomad Sahara's, I honestly couldn't believe how great it turned out.. V3.0 is now complete and the truck is setup way better than a year ago.

I also had time to mount my builtright dash mount.. unreal how the stupid tariffs made this little thing next to impossible to get up here.. but she's in and now to install a USB car charger socket for the dash cam.

20260618_210713.webp
 
After 4 months of waiting (due to my schedule + lead time) I was Finally able to ditch the Toyo AT3s and KMCs. Now running a set of the new 37" Yokohama AT4 XDs on 17" Nomad Sahara's, I honestly couldn't believe how great it turned out.. V3.0 is now complete and the truck is setup way better than a year ago.

I also had time to mount my builtright dash mount.. unreal how the stupid tariffs made this little thing next to impossible to get up here.. but she's in and now to install a USB car charger socket for the dash cam.

View attachment 259967
Everything flows together my friend. Looking good!
 
Spending the night just outside of MOAB- planning on visiting tomorrow on my way to ABQ.
Looking at the Schafer trail and possibly onion creek as well?
Toasty night to be sleeping in the bed… I miss the 30* nights in the Yukon already 😩
IMG_8913.webp
 
After 4 months of waiting (due to my schedule + lead time) I was Finally able to ditch the Toyo AT3s and KMCs. Now running a set of the new 37" Yokohama AT4 XDs on 17" Nomad Sahara's, I honestly couldn't believe how great it turned out.. V3.0 is now complete and the truck is setup way better than a year ago.

I also had time to mount my builtright dash mount.. unreal how the stupid tariffs made this little thing next to impossible to get up here.. but she's in and now to install a USB car charger socket for the dash cam.

View attachment 259967
I can see your feet.
 
After 4 months of waiting (due to my schedule + lead time) I was Finally able to ditch the Toyo AT3s and KMCs. Now running a set of the new 37" Yokohama AT4 XDs on 17" Nomad Sahara's, I honestly couldn't believe how great it turned out.. V3.0 is now complete and the truck is setup way better than a year ago.

I also had time to mount my builtright dash mount.. unreal how the stupid tariffs made this little thing next to impossible to get up here.. but she's in and now to install a USB car charger socket for the dash cam.

View attachment 259967
I’ll have to check out those new Yokohamas.
 
Getting ready for camping. I need an advice, is this a safe setup using ratchet straps, i have zero play.

View attachment 259794View attachment 259795
How far and how off-road? If more than 1k miles or significant off-road, move it up against the cab and add a set of bungies, like these, to help it stay snug. The ratchets and even the handles on the tote will stretch a bit over time and loosen, leading to increased wear. The bungies will keep that from getting out of hand. Rugtol Adjustable Bungee Cords... https://www.amazon.com/dp/B0DP6FC9RW?ref=ppx_pop_mob_ap_share
 
Getting ready for camping. I need an advice, is this a safe setup using ratchet straps, i have zero play.

View attachment 259794View attachment 259795
I agree with everyone on moving it forward.
I've ditched my ratchet straps and have switched completely to Tork Straps. Only time i use ratchet straps is when i need to do something super sketch.

Not a major concern but i'd consider lashing that handle down too. while it can only go up so far, if theres no reason for it to move, keep it from moving.
 
I’ll have to check out those new Yokohamas.

I think you'll be happy with them. I was annoyed by the limited options for a 37 tire with 4 season/3 peak rating over the years, so this is a nice change. I will say though, these are noisy tires haha.. but idc.

The shop who built my truck primarily runs Yokohama tires, and swears by these on their shop Tundras and Taco.. and I've seen them in action. So I'm excited to put them through the paces over the summer.

I also put the new Yoko AT4 G018 on my wife's 4R Pro and those are unreal in the winter. That definitely persuaded me to make the change.
 
I also had time to mount my builtright dash mount.. unreal how the stupid tariffs made this little thing next to impossible to get up here.. but she's in and now to install a USB car charger socket for the dash cam.
Shippsy has been good for me for this sorta thing. $10 flat fee instead of the ridiculous charges from DHL//UPS//etc, basic tax and duty, and then they can ship it out to me. (I think they have a pickup location in Calgary that’ll work even better for you.)

Sometimes, especially if you can get it combined with free shipping to the US, it’s cheaper than direct ship unless you can get someone to ship USPS//Canada Post. It takes a bit longer though.

Got my behind the seat BuiltRight panel recently for less than the usual UPS fees. Just got my DTE module shipped with them for all in less than if I had shipped it directly.

Was free shipping to the forwarder, then cost me ~$60CDN all in for shipping on this side, duty, taxes, and the Shippsy fee. Was gonna cost me $50US for shipping directly from S&B, and then add the duty, taxes, and UPS’ ridiculous border processing fee on top of that.

Might be worth checking out if you need to get more stuff from south of the border.
 
I've ditched my ratchet straps and have switched completely to Tork Straps
I might have to acquire some of these and try them out. I have some motorcycle cam buckle tie downs I use quite a bit. Like these:


...or some standard rubber tie downs as both options are quick and sufficient for most of my needs.
I only pull out the ratchet straps when I need extra length, but I see you can also get an extension for the tork strap. :unsure:
 
I might have to acquire some of these and try them out. I have some motorcycle cam buckle tie downs I use quite a bit. Like these:


...or some standard rubber tie downs as both options are quick and sufficient for most of my needs.
I only pull out the ratchet straps when I need extra length, but I see you can also get an extension for the tork strap. :unsure:
Tork straps and Modl: the only tie-down products i use.

Speaking of, both of those would make for a FANTASTIC group buy. @DTX2023Tremor ;)
 
Tork straps and Modl: the only tie-down products i use.

Speaking of, both of those would make for a FANTASTIC group buy. @DTX2023Tremor ;)
I take that back, I do use The Perfect Bungee
But only to tie down our GoBoats when we drag them down to the water.
 
Back
Top Bottom