🛠️ What did you do to your Tremor today? [2026 edition]

Soooo.... The first iteration of my drawer slide didn't work as well as I had hoped. So, going with your imposed theme, I am going in a different route. 😜☠️View attachment 257539

Now just be sure to spread out your kill kit contents.....I mean your hunting field dressing kit.....Ummmm.......yea.....that's it. 🔪🔪🔪🍽️🍽️🍽️🍽️

:cool::cool:☕☕🇺🇲🇺🇲🇺🇲🇺🇲
 
Now just be sure to spread out your kill kit contents.....I mean your hunting field dressing kit.....Ummmm.......yea.....that's it. 🔪🔪🔪🍽️🍽️🍽️🍽️

:cool::cool:☕☕🇺🇲🇺🇲🇺🇲🇺🇲
Lots of trash bags.... I mean carcass bags.... I mean "game bags" 🥸
 
On my 2024 6.7 Tremor about two weeks ago I swapped the 34 gallon tank with the S&B 60. Also added the Fleece under assembly filter. Chatgpt said it would take about 4 hrs to install in my driveway but it sadly took me 16 hours and I had to go out and get a floor jack to raise the driver side an inch to scoot the new tank in. I'm not a mechanic just a highly focused (or no fear) DIYer. I did use forscan to update the tank setting size and from pcm to icm but that did not work so I ordered the re-calibration module from S&B
 

Attachments

  • 20260504_154523.webp
    20260504_154523.webp
    290.5 KB · Views: 44
Today I start the CP4 to DCR swap, I planned 5 days for this work. It will also include the Fleece under hood filter, pusher intake, no limits inter-cooler and coolant hose. Already installed the banks cai and boost tubes. Still waiting for the SPE Coolant Hose Reroute Kit. PTT w/Arod vids made me think I can do this :)
 
Washed truck in rain then put away 🤓this truck is a garage queen never sees weather
Worked on cummins till I got bored
 

Attachments

  • IMG_0379.webp
    IMG_0379.webp
    163.5 KB · Views: 61
  • IMG_0378.webp
    IMG_0378.webp
    250.1 KB · Views: 56
On my 2024 6.7 Tremor about two weeks ago I swapped the 34 gallon tank with the S&B 60. Also added the Fleece under assembly filter. Chatgpt said it would take about 4 hrs to install in my driveway but it sadly took me 16 hours and I had to go out and get a floor jack to raise the driver side an inch to scoot the new tank in. I'm not a mechanic just a highly focused (or no fear) DIYer. I did use forscan to update the tank setting size and from pcm to icm but that did not work so I ordered the re-calibration module from S&B
That's because ChatGPT could have done it in about 4 hours :ROFLMAO:
 
Today I start the CP4 to DCR swap, I planned 5 days for this work. It will also include the Fleece under hood filter, pusher intake, no limits inter-cooler and coolant hose. Already installed the banks cai and boost tubes. Still waiting for the SPE Coolant Hose Reroute Kit. PTT w/Arod vids made me think I can do this :)
I’ve done 3 DCR pumps takes
About 1.5 days due wt reduction ect ect SS has good directions so should not have any issues
Good luck
 
Installed a LogiqAir system with HD2 compressor and boost tank. Not a lot of fun running a grinder that close to the frame to cut of the 5th wheel nut tabs.
 

Attachments

  • IMG_6329.webp
    IMG_6329.webp
    270 KB · Views: 46
  • IMG_6328.webp
    IMG_6328.webp
    314.3 KB · Views: 44
  • IMG_6327.webp
    IMG_6327.webp
    319.7 KB · Views: 46
  • IMG_6326.webp
    IMG_6326.webp
    328.2 KB · Views: 45
  • IMG_6325.webp
    IMG_6325.webp
    233.7 KB · Views: 51
  • IMG_6317.webp
    IMG_6317.webp
    131.4 KB · Views: 47
I’m almost done with this project. Just have to wait until it’s dry to run the wiring. For various reasons it took me 10x longer than i thought it would to figure it out. Wiring 17 pods in total, it’s a puzzle of wire amperage, gauges and distances.
 

Attachments

  • IMG_2248.webp
    IMG_2248.webp
    269.3 KB · Views: 72
  • IMG_2247.webp
    IMG_2247.webp
    200.8 KB · Views: 72
  • IMG_2246.webp
    IMG_2246.webp
    220.1 KB · Views: 72
  • IMG_2245.webp
    IMG_2245.webp
    235.8 KB · Views: 76
I finally got a chance to see some dirt. Drove 80 down a road I could only do 40 in my GMC half ton. I still can’t believe this thing is mine. I’m averaging 300-400km a day and it’s an absolute dream to drive now that I dropped the tire pressure.
60psi fronts
55psi rears.

IMG_3642.webp
 
I’m almost done with this project. Just have to wait until it’s dry to run the wiring. For various reasons it took me 10x longer than i thought it would to figure it out. Wiring 17 pods in total, it’s a puzzle of wire amperage, gauges and distances.
Wow. You will be able to see in to the future with all of those pods! :ROFLMAO:
 
Back
Top Bottom