🛠️ What did you do to your Tremor today? [2026 edition]

Added a front light bar and rear facing lights. They turned out nice, look like they belong there. 😀
 

Attachments

  • IMG_8896.webp
    IMG_8896.webp
    200.3 KB · Views: 81
  • IMG_8895.webp
    IMG_8895.webp
    310.4 KB · Views: 72
  • IMG_8897.webp
    IMG_8897.webp
    180 KB · Views: 81
  • IMG_8898.webp
    IMG_8898.webp
    84.2 KB · Views: 89
Added a front light bar and rear facing lights. They turned out nice, look like they belong there. 😀
Front light bar looks great. Universal brackets or was that a kit?
 
Front light bar looks great. Universal brackets or was that a kit?
Thanks. I bought the brackets from Michigan off-road. They were a bit of a pain to install but worth it.

Bought this light bar - Rough Country 30" Curved LED Light Bar - 150W, 12,000 Lumens, Spot Focus Beam, Off-Road Lighting for Jeeps, Truck & UTV https://a.co/d/02S7DEGb
 
Finished fighting with the Sapium Dashcam install, got it pretty much all setup, maybe some settings to tweak still. Briefly hunted for my connector so I could install my BD High Idle kit, but was still too cold to be pulling off panels, so I'll wait on that.
 
Where ya get those hitch brackets?
I found these on Etsy but his light connections didn’t work with the lights I had. I measured my lights and designed one that would work with my light. I got in touch with him and we worked out something where he incorporated his hitch connection and my connection together. Here is the link.

This is the part I put together to work with the light I have.
 

Attachments

  • IMG_6707.webp
    IMG_6707.webp
    21.3 KB · Views: 44
Just got done adding the color matched front Ford Emblem along with the clear covers for the LP6’s and the Dirtcom Trailguard.

IMG_5904.webp
 
Doing a little preparation for the future. Red wire will go to override my rear floods that are already on the reverse circuit. Blue will fire future 1” pods at 40 degree angles for more side- rear light. Orange for maybe a tail gun or depth charge release 🤪
Not shown are additional wires going to the bed step pockets for future small flush mount pods with amber backlighting.
I only want to fish wiring once!

IMG_1553.webp
 
Doing a little preparation for the future. Red wire will go to override my rear floods that are already on the reverse circuit. Blue will fire future 1” pods at 40 degree angles for more side- rear light. Orange for maybe a tail gun or depth charge release 🤪
Not shown are additional wires going to the bed step pockets for future small flush mount pods with amber backlighting.
I only want to fish wiring once!

View attachment 250795
I like your rubber band trick...that's nifty 🤓
 
I did something similar, but I used 14/4 insulated wire running from the back of the truck to the engine bay on both sides (2 runs on each side). All items can share the ground wire on each side, and the other 3 wires in each bundle can be used for power, for a total of 12 different output possibilities. Much easier to run wire once. I didn’t want to create a loom, so this was the solution for me. Currently running 10 lights on 8 different outputs so I still have 4 open for future additions if needed. This is what I used - https://a.co/d/0bOnFl29
 
Last edited:
I did something similar, but I used 14/4 insulated wire running from the back of the truck to the engine bay on both sides (2 runs on each side). All items can share the ground wire on each side, and the other 3 wires in each bundle can be used for power, for a total of 12 different output possibilities. Much easier to run wire once. I didn’t want to create a loom, so this was the solution for me. Currently running 10 lights on 8 different outputs so I still have 4 open for future additions if needed. This is what I used - https://a.co/d/0bOnFl29
I thought about something like that. The only thing was that I’ll have a T tap to go to the steps. Building a loom to go to anything rear of the cab seemed like the way to go. The spares are also 12 gauge because you never know.
 
Thanks for the link! This is exactly what I was looking for. I have a ratchet bar and it will not stay in place.
Just a warning on this product. I ordered a TBD rack w/organizer and hooks on Saturday while I was on my phone. Paid $313.99 and that included delivery to the USA. UPS attempted delivery today and left a "Sorry we missed you' note stating I owed $190.94 COD. Waiting to hear back from TRUXISTM.
 
I don't think they have any influence on our duties and tariffs. This is what stopped me from ordering their rack.

 
Back
Top Bottom