🛠️ What did you do to your Tremor today? [2026 edition]

Yeah, I wish they offered black appearance with the 2 tone. I did the Fender Emblems, the tailgate appliqué is ordered, so it’s just the grill left to purchase.
Would be nice. The tramp stamp has grown on me, so I’ll likely keep it; maybe add the Tufskinz colour match lettering to it.

I swapped my grille to the 450 when Bambi took it out, that’s got a burnished aluminum to it with the black emblem.

The window trim and the strip on the powered boards cause me to stop and think frequently.
 
Ok I'm starting a project that I thought was going to be easy, but here I am. I am trying to run a fulltime hot wire to the front console area, just opposite of the factory USB-C/USB-A plugs. I thought I would be able to access the area with my hand when I removed the glovebox. Not the case. For those that have dug more into the dash, how does one access this area?
Having just gone thru having to fish wiring the center console for in dash BuiltRite GPS mount, my suggestions are.
  • Remove the lower glove box and the trim piece covering the internal fuse box, this should provide enough access to fish the wire from the internal fuse box, are you going to use a fuse tap?
  • If your comfortable and have access to use a hole saw probably 1⅛ inch for your plug in the location for your plug, fish the plug lead from center console over to internal fuse box.
Am hopeful this will give you enough access to get plug installed, otherwise you may have to unbolt center console and move it back to get enough working room. While working on my '24 found this YouTube
I didn't remove the seats, as shown in the video but found it very useful getting all that plastic trim removed w/o breaking anything😎
Hope this useful, salud 🥃
 
Impressive. I think I’m most impressed though that all these lights from different manufacturers are damn close if not the same shade of red. 😆

They are all pretty close when looking at them at night. During the day i can see the different shades of red, especially the Ford Emblem stands out. I’m about to put all the backlighting circuits on a Garmin PowerSwitch, so i’ll program for them to turn on with sunsets.
 
Anyone have any ideas why theres such a weird wear pattern. Or maybe it's not weird but it's the first time I noticed it.

If you are rotating your own tires, check the shocks. Way too easy with the tires off.
:cool: :cool: 🇺🇲 🇺🇲 🇺🇲 🇺🇲
 
Thanks. Used the Freedom Blade in the past on my Chevy...awesome products. Did you have to remove the tailgate or was it easy to put on with it attached?

Pretty easy to install and wire up, all plug and play It goes under the tailgate so no need to remove it.
 
Pretty easy to install and wire up, all plug and play It goes under the tailgate so no need to remove it.
My Chevy has such a small gap that you have to remove the tail gate to mount it properly. Haven't looked at the tail gate opening on the F250 since I don't have one yet to take a good look. I am looking at this one:

 
My Chevy has such a small gap that you have to remove the tail gate to mount it properly. Haven't looked at the tail gate opening on the F250 since I don't have one yet to take a good look. I am looking at this one:


This one seems to have more features but is more expensive.

They also recently released this one, very expensive, but i like that it sits high and integrates nicely.


IMG_1378.webp
 
This one seems to have more features but is more expensive.

They also recently released this one, very expensive, but i like that it sits high and integrates nicely.


View attachment 247906
That’s the one I’ve been thinking about ordering just not sure if I like the hidden one under the tailgate more or this one that’s more visible.
 
That’s the one I’ve been thinking about ordering just not sure if I like the hidden one under the tailgate more or this one that’s more visible.

When i was planning my upgrades Excalibur one wasn’t an option. If i was to do it today, i would go for it over the lower bar design that is pretty common across all trucks. It will stand out from the crowd. And i like that it looks almost oem/factory, at least on their product photos.
 
Would be nice. The tramp stamp has grown on me, so I’ll likely keep it; maybe add the Tufskinz colour match lettering to it.

I swapped my grille to the 450 when Bambi took it out, that’s got a burnished aluminum to it with the black emblem.

The window trim and the strip on the powered boards cause me to stop and think frequently.
I was thinking about doing the High Airflow Grille that comes on the 350/450. Where did you order it?
 
This one seems to have more features but is more expensive.

They also recently released this one, very expensive, but i like that it sits high and integrates nicely.


I saw that one too. I think I like the looks of the low mount versus high which is why I ruled out the new version...at least for now. It may grow on me before my truck arrives.
 
Last edited:
Post in thread 'What did you do to your Tremor today? [2025 edition]' https://www.fordtremor.com/threads/...r-tremor-today-2025-edition.20053/post-517314

I finally got to the bottom of this issue per the dealership message "Electric power steering harness melted to passenger side header cuz installer of headers pulled harness from there mounts but didn’t tie them back. Not really warranty but it’s all in the way you word it on the repair order."

Since it's been repaired almost a month no issues or codes.
 

Attachments

  • Screenshot_20260302_143053_Messages.webp
    Screenshot_20260302_143053_Messages.webp
    77.1 KB · Views: 43
  • Screenshot_20260302_143058_Messages.webp
    Screenshot_20260302_143058_Messages.webp
    73.7 KB · Views: 46
  • Screenshot_20260302_143103_Messages.webp
    Screenshot_20260302_143103_Messages.webp
    53.9 KB · Views: 47
  • Screenshot_20260302_143107_Messages.webp
    Screenshot_20260302_143107_Messages.webp
    154.7 KB · Views: 43
Post in thread 'What did you do to your Tremor today? [2025 edition]' https://www.fordtremor.com/threads/...r-tremor-today-2025-edition.20053/post-517314

I finally got to the bottom of this issue per the dealership message "Electric power steering harness melted to passenger side header cuz installer of headers pulled harness from there mounts but didn’t tie them back. Not really warranty but it’s all in the way you word it on the repair order."

Since it's been repaired almost a month no issues or codes.
Can I assume your header installer paid for the repairs?
 
Luckily my godfather works at this dealer and they worded it so that it ended up being covered by my extended warranty through ford.
Great to hear. So the dealership lied to Ford about the repair to get it covered?
 
Back
Top Bottom