🛠️ What did you do to your Tremor today? [2026 edition]

I’m 6’ and not sure I can reach the center of the front windshield!

I got two folding platforms, using one for each side I move them in-out when washing/drying.
I can get most of the roof, while I can get over 1/2 the windshield from one side. Helps tons to get water spots down to a minimum.

:cool: :cool: :coffee: :coffee: 🇺🇲 🇺🇲 🇺🇲 🇺🇲
 
The pic @Alpoba just posted shows it’s straight by my eye. He is one of the most diligent on here with his mods and if I remember correctly, he does most by himself.
Betting it was camera angle.
Not going to disagree with his ability. All I was saying is that last pic in his original post was clearly off center. If it was the angle of picture than that's great that it's centered. I've seen way too many folks do stuff to their cars and trucks that look "fine" but not perfect. Just my anal engineering side that spots this stuff quickly. Happy to see that it appears to be the camera angle and not the install. The bottom pic in post 558 shows this clearly.
 
1000011387.webp
1000011388.webp

Yesterday I installed my conduit carrier.


Today I went and filled up her tank with some premium gas just cuz and then I noticed that I had some weird wear on my driver front tire. they're probably all the same but that one was the only one that went through kitty litter 🤣🤣
Anyone have any ideas why theres such a weird wear pattern. Or maybe it's not weird but it's the first time I noticed it. 🤷
1000011404.webp
1000011405.webp
 
Common to every vehicle I've ever owned including my current Tremor. Is it both sides? I think its caused by turns in the road. Exaggerated by heavier truck and speed around turns. I call them WV tires.
 
Common to every vehicle I've ever owned including my current Tremor. Is it both sides? I think its caused by turns in the road. Exaggerated by heavier truck and speed around turns. I call them WV tires.
I'm sure it's both sides but that's the only tire that went through the kitty litter at the gas station. About time for a rotation anyway 😉🤷🤣
 
View attachment 247813View attachment 247814
Yesterday I installed my conduit carrier.


Today I went and filled up her tank with some premium gas just cuz and then I noticed that I had some weird wear on my driver front tire. they're probably all the same but that one was the only one that went through kitty litter 🤣🤣
Anyone have any ideas why theres such a weird wear pattern. Or maybe it's not weird but it's the first time I noticed it. 🤷
View attachment 247815View attachment 247816
If that is the same pattern on both sides, you might have worn tie rod end(s). OTOH, if most of your driving is on 2 lane “crowned” roads, it could be completely normal.
 
View attachment 247813View attachment 247814
Yesterday I installed my conduit carrier.


Today I went and filled up her tank with some premium gas just cuz and then I noticed that I had some weird wear on my driver front tire. they're probably all the same but that one was the only one that went through kitty litter 🤣🤣
Anyone have any ideas why theres such a weird wear pattern. Or maybe it's not weird but it's the first time I noticed it. 🤷
View attachment 247815View attachment 247816
I would rotate and align if this was my truck. If you have worn parts, the alignment process will find it.
 
If that is the same pattern on both sides, you might have worn tie rod end(s). OTOH, if most of your driving is on 2 lane “crowned” roads, it could be completely normal.
Mostly highway, 29k miles, last rotation was about 7k miles. Tie rods wouldn't wear out that fast with 99% on road, normal driving, right? But, my front crank seal only lasted to 23k so, who knows? 🤷
 
Mostly highway, 29k miles, last rotation was about 7k miles. Tie rods wouldn't wear out that fast with 99% on road, normal driving, right? But, my front crank seal only lasted to 23k so, who knows? 🤷
Tie rods and ball joints *should* last longer. Old truck had 72k (half of that towing 11-13k) before the first tie rod end went.
@HitFactor has the right idea. Rotate and align. If there is slop they should be able to find it.
 
Maintenance
  • Reapplied the OEM orange TREMOR stickers I had removed
  • Oil Change with Mobil 1 Full Synthetic
    • Gonna send off the oil to get analyzed. Have never done that before so wanted to see what it said about my 7.3L with (4K total miles)
  • Checked rear diff - I hear a gear-ish sound from 20-15 mpg when slowing down but below 15 mpg I don't hear it
    • Plug magnet was really dark/black but oil was "clear"
Need to rotate tires soon
 
2025(2023+) King Ranch Window Belt Molding Chrome Delete. Part Numbers are below:

ML3Z-1521453-D
ML3Z-1625597-D
ML3Z-1521452-D
ML3Z-1625596-D

Cheapest I could find was www.oemfordpartsdirect.com. Ran me $641.31 with shipping. Took me about 10 minutes for the rear doors and about an hour for the front doors.
 

Attachments

  • IMG_5590.webp
    IMG_5590.webp
    62 KB · Views: 33
  • IMG_5591.webp
    IMG_5591.webp
    113.9 KB · Views: 46
  • IMG_5592.webp
    IMG_5592.webp
    64 KB · Views: 34
Never got why they left this chrome there on the two tone KR. But haven’t brought myself to do this swap yet.

Looks good!
 
Never got why they left this chrome there on the two tone KR. But haven’t brought myself to do this swap yet.

Looks good!
Yeah, I wish they offered black appearance with the 2 tone. I did the Fender Emblems, the tailgate appliqué is ordered, so it’s just the grill left to purchase.
 
Purchased my ESP today. The last few ESP price increases have been beyond expected, because of that i wish i did it a year ago, but no crystal ball.

View attachment 247566
Our 22 thinks it’s a government vehicle
So no esp
 
Back
Top Bottom